Panasonic 3D Eyewear TY-EW3D10U Operating Instructions

Operating Instructions3D Eyewear
TY-EW3D10U
Model No.
Thank you for purchasing a Panasonic product.
 
 
Before operating this product, please read the instructions carefully, a\
nd save this 
manual for future use.
 
 
Before using this product, be sure to read “Safety Precautions" (
pages 2 - 3).
TQZJ230
This product cannot be used as 
sunglasses. 
This product can be worn over vision 
correction glasses. 
Contents
Safety Precautions ·························\
····· 2
Identifying Controls...

2
Safety Precautions
Warning
About Prevention of Accidental Ingestion 
„ Do not store batteries or the band accessory in places where 
small children can reach.
There is a danger small children could swallow such parts by mistake.
 
 
If a child accidentally swallows such parts, seek immediate medical atte\
ntion.
About Prohibition of Disassembly
 
„ Do not disassemble or modify the 3D Eyewear. 
Doing so may result in fire, or in a malfunction that may cause the user to feel unwell.
About...

3
About Viewing of 3D Images 
„ Do not move around while wearing the 3D Eyewear.
The surrounding area appears dark, which may result in falling or other \
accidents that 
may cause injury.
 
„ In the event that you experience dizziness, nauses, or other 
discomfort while viewing 3D images discontinue use and rest 
your eyes.
Parents/guardians should monitor children's viewing habits to avoid thei\
r prolonged 
use without rest periods.
About Lithium Battery
 
„ Danger of explosion if...

4
Identifying Controls
 
„ Battery caseFitting the battery (page 9)
When using for the first time, remove the insulating sheet.  
(
page 7)
 
„ Liquid Crystal Shutter 
(lens) 
Controls the images for 3D viewing.
The left and right liquid crystal 
shutters are alternately opened 
and closed in time with the left 
side and right side images that 
are alternately displayed on the 
television to achieve the 3D effect.
 
„ Nose pad installation section (3D Eyewear inner section)
(page 7)...

5
Using Precautions
 
„ Liquid Crystal Shutter (Lens) 
 
Do not apply pressure to the liquid crystal shutter. Also, do not drop o\
r bend the 
3D Eyewear.
 
 
Do not scratch the surface of the liquid crystal shutter with a pointed \
instrument etc.  
Doing so may cause damage to the 3D Eyewear, and reduce the quality of the 3D 
image.
 
„ Infra-red receiver section 
 
Do not soil the infra-red receiver section or attach stickers etc. to it\
.
• Doing so may prevent the receiver from receiving...

6
 
„ For comfortable viewing 
 
View the screen at a distance at least 3 times further than the effectiv\
e height of the 
screen.
Recommended distance:
  For a 50-inch television  1.9 m (6’2”) or more
  For a 54-inch television  2.0 m (6’6”) or more
  For a 58-inch television  2.3 m (7’6”) or more
  For a 65-inch television  2.4 m (7’10”) or more
Using the 3D Eyewear at a distance closer than the recommended distance may 
cause eyesight fatigue.
When the top and bottom area of the screen is...

7
Using for the first time
 
„ Remove the insulating sheet
Insulating sheet
 
„ Attach the specialized bandIf the 3D Eyewear slips out of place, use 
the specialized band included to hold it in 
place. 
Attach the band to the 
left and right tips of the 
frame, and adjust the 
length.
Specialized band
 
„ Attach the nose padIf required, use the included nose pad.
 
 
Nose pad A adjusts the attachment position 
of the 3D Eyewear between 2 vertical levels.   
(Slot 2 of the 3  protrusions on...

8
Using the 3D Eyewear
 
„ Using the television menu controls, set so that 3D images are 
shown.
1. 
(When 3D image signals are being received) press the MENU button on 
the television remote control.
2.  Select "Setup", and press the OK button.
3.  Select "3D settings", and press the OK button.
4.  Select "3D Eyewear", and use 
 to select "On" or "Off". 
 
The procedure above is only an example. For details, see the television operating 
instructions.
 
 
You...

9
Storage and Cleaning
 
 
Clean using a soft, dry cloth.
Wiping the 3D Eyewear with a soft cloth that is covered in dust or dirt may scratch th\
e 
eyewear. Shake off any dust from the cloth before use.
Do not use benzene, thinner, or wax on the 3D Eyewear, as doing so may cause the 
paint to peel off.
 
 
Do not dunk the 3D Eyewear in liquid such as water when cleaning.
 
 
Avoid storing the 3D Eyewear in hot or highly humid locations. 
Replacing the batteries
When the power lamp does not light,...

10
Troubleshooting/Q&A
Images are not 3D.
 
 
Are the image settings switched to 3D images?
Some 3D image signals are not automatically 
recognized as 3D images.
Set the television images to “On”.
For details, see the television operating 
instructions.
 
 
Is there a sticker or other such item blocking 
the infra-red reception section on the 
3D Eyewear?
The 3D Eyewear operates by receiving signals 
from the television.  
Check that there are no objects blocking the path 
between the television and 3D...