Panasonic 32" Vlass 720p Lcd Hdtv Tc L32x30 Owners Manual

							31
Basic
 Playing an iPod on TV
Remote mode (Photo playback)
In  Select  “Remote”
Videos
Podcasts
SettingsMusic
OKSelectRETURNRGBY
Remote01:02 / 05:23
Music Artists 
Albums
AudiobooksPlaylists
Songs
Screen will be switched when “Remote” is selected.
 OperateOperate your iPod through the iPod screen using 
either TV remote control or the iPod.
iPod is in operation. Please observe your iPod screen and use 
the TVs remote to control it.For iPod with touch screen, please use the touch screen to operate it.Press SUB MENU to go back.Go back to 
main menu
SUBMENU
*  For iPod with touch screen, please use the touch screen to operate it.
Settings (iPod options)
In 
 Select  “Settings”
Videos
PodcastsMusic
SettingsRGBY
Remote
OKSelectRETURN
01:02 / 05:23
Music Artists 
Albums
AudiobooksPlaylists
Songs
 Select the item and adjust
 select
 change
 set
OnOff
OnOff
xxxxx1.0.0
iPod optionsPicture
Audio
Plug and Play
Shuffle
ECO Play Repeat
Model
Version
(example)
Settings  Items Setting or Item DescriptionPicture See p.49 for more details
Audio See p.50 for more details
Plug and play On/Off
On:   Starts the iPod application automatically when your iPod is inserted int\
o the Universal Dock.Shuffle Off/Songs/Albums Switches shuffle mode
Repeat Off/One/All Sets repeat playback mode
ECO play On/Off On: Reduces screen brightness to lower power consumption.
•  Automatically switches to ECO play mode when NO OPERATION is performed for more than 3 minutes.
•  Press any key to exit ECO play mode.
•  Not switch to ECO play mode While video play back.
 

vOther useful functions 

”How to play a favorite song?
Before you set these settings, connect your iPod to the Universal Dock w\
ith the desired track set to pause. (When the 
“Shuffle” setting is “Songs” or “Albums”, iPod starts shuffle play.)
Background music playback
While viewing Photo in Media player (p. 24-25) Follow the direction - in Slideshow settings Select “Soundtrack settings”
OffOffOffNormalOffNormalOn
Slideshow settings
FrameStart Slideshow
Photo effect
Transition effectPhoto sizeBurst playbackDisplay intervalRepeat playbackSoundtrack settings
 Set “iPod” in “Soundtrack settings” 
 select
 change
 next
Music 5
User selected
iPod Auto
User selected 03 XXXX
Soundtrack settings
Music 1OFF
 Operate
Operate your iPod itself.
On timer playback
When the TV is turned On using the Timer, the iPod 
starts playing. (Refer to “Timer settings” on p. 50)
 Displayed “Timer” and select Timer (1-5) Menu
Turns the TV off after selected time.
TimerSleep
Timer 1
Timer 2
Timer 3
Timer 4
Timer 5 select
 next
 Set “On” in “Timer set” Set “iPod” in “Inputs”Menu
Sets the input to select when the TV turns on.
OniPod--4/18 [SUN]--:----:--
Timer 1Timer set
Inputs
Channel
Day
On time
Off time select
 set
 Set other Timer items
•  Performance may change depending on the software version of the iPod.
UD@-@Y@FOH@JOEC


UD@-@Y@FOH@JOEC








 
						

							32
 
VIERA LinkTM “ HDAVI ControlTM”
Simultaneously control all Panasonic “HDAVI Control” equipped components using one button on the TV remote.
Enjoy additional HDMI Inter-Operability with compatible Panasonic produc\
ts.
This TV supports “HDAVI Control 5” function.
Connections to equipment (DVD recorder DIGA, HD Camcorder, Home theater system, Amplifier, etc.) with HDMI cables 
enables VIERA Link controls.
Equipment with the “HDAVI Control” function enables the following operations:
Version Operations (See p. 34-37, for more information)
HDAVI Control or later
•  Automatic Input Switching
•  Power on link
•  Power off link
•  Default speakers
•  Speaker control
HDAVI Control 2 or later
•  VIERA Link control only with the TV’s remote control
•  Unselected device energy save (for available equipment only)
HDAVI Control 3 or later
•  Provides setting information (Language, time. etc.)
•  Automatic lip-sync function
HDAVI Control 4 or later
•  Energy saving mode (with Quick Start mode)
HDAVI Control 5
•  Audio Return Channel
Audio Return Channel (ARC) is a function that enables digital sound si\
gnals to 
be sent via an HDMI cable back from the TV to a connected audio device.
 

vWhen adding new equipment, reconnecting equipment or changing the setup \
after the connection, 
turn the equipment on and then switch the TV on. Set the input mode to H\
DMI1, HDMI2 or HDMI 3 
(p. 21), and make sure that the image is displayed correctly.
VIERA Link “HDAVI Control”, is based on the control functions provided by HDMI and i\
ndustry standard known as HDMI 
CEC (Consumer Electronics Control), with unique function that we have \
developed and added. As such, its operation with 
other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.
Please refer to the individual manuals for other manufacturers’ equipment supporting the VIERA Link function.
 

vHDMI cable
This function needs an HDMI compliant (fully wired) cable. Non-HDMI-co\
mpliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable. Recommended part number:
RP-CDHS15 (4.9 ft/1.5 m), RP-CDHS30 (9.8 ft/3.0 m), RP-CDHS50 (16.4\
 ft/5.0 m)
 *  For more details on the external equipment’s connections, please refer to the operating manual for the equipment.
UD@-@Y@FOH@JOEC


UD@-@Y@FOH@JOEC








 
						

							33
Advanced
 VIERA Link
TM “HDAVI Control
TM”
 
VIERA Link™ Connections (with VIERA Link function)
 

vTerminal overview
Back of the TV
 

vConnecting DVD Recorder (DIGA)
DVD recorder (DIGA) 
with VIERA Link functionHDMI cable
 

vConnecting Home theater system/AV ampHDMI 1 is recommended.
HDMI cable
Optical cableHome theater systems 
with VIERA Link function
AV amp with 
VIERA Link functionDVD recorder (DIGA) 
with VIERA Link function
No optical cable is necessary when connecting a Home Theater 
supporting “HDAVI control 5” with an HDMI cable. Audio will be 
supported via ARC (Audio Return Channel) (p. 32)
 

”One AV amp and one DVD recorder (DIGA) can be operated with this unit.
 

vConnecting HD Camcorder/Digital cameraPress INPUT and select an available HDMI terminal, then connect the camcorder to th\
is input. After connection, 
confirm the HDAVI control functions. (p. 34-37).
HD Camcorder 
with VIERA Link  function
HDMI / mini HDMI cableLUMIX 
with VIERA Link  function
If connection (or setting) of equipment compatible with HDAVI control is changed, switch the power of this unit Off and 
On again while the power of all equipment is On (so that the unit can c\
orrectly recognize the connected equipment) and 
check that the connected equipment playback operates.
Note
 

”Individual HDMI equipment may require additional menu settings specific \
to each model. Please refer to their respective manuals . 

”When audio from other equipment connected to this unit via HDMI is outpu\
t using “DIGITAL AUDIO OUT” of this unit, 
the system switches to 2CH audio.
(When connecting to an AV amp via HDMI, you can enjoy higher sound quality.)
 

”Some devices use Mini-HDMI terminal. HDMI (type A) to Mini-HDMI (type C) cable or adapter should be used.
UD@-@Y@FOH@JOEC


UD@-@Y@FOH@JOEC








 
						

							34
 
VIERA Link settings and Available features
To use all VIERA Link functions: After everything is connected, in VIERA Link settings menu, set “VIERA Link” to “On”.
Some features are disabled depending on the “HDAVI Control” version of the equipment. 
Please check the list (p. 32)
 Press to exit from a menu screen
 Press to go back to the previous 
screen
Display the menu
Select “VIERA Link settings” in “Setup”
MenuSetup 1/2
ANT/Cable setupInput labels
Network settings
VIERA Link settings
ECO/energy saving Channel surf mode
Language
ClockAll select
 next
Select “VIERA Link”
OnNoYe s
TV
Quick start
No (stay on)
MenuVIERA Link settingsVIERA LinkPower on link
Power off link
Default speakers
Energy saving mode
Unselected device energy save
select
Select “On”(default is On)change
Select and make other settings
OnNoYe s
TV
Quick start
No (stay on)
MenuVIERA Link settingsVIERA LinkPower on link
Power off link
Default speakers
Energy saving mode
Unselected device energy save
select
UD@-@Y@FOH@JOEC


UD@-@Y@FOH@JOEC








 
						

							35
Advanced
 VIERA Link
TM “HDAVI Control
TM”
Automatic Input Switching
When using a Blu-ray Disc player, DVD player/recorder or Home theater system, the TV will automatically change to 
the appropriate input, when playback begins on one of those devices.
•  For a Home theater system the speakers automatically switch to the theat\
er system.
  Power on link
Yes: The TV is turned on automatically and switches to the appropriate HDMI input\
 whenever VIERA Link compatible 
equipment is initially turned on and the Play mode is selected.
  Power off link
When “Yes” is selected and the TV is turned off, all connected VIERA Link compatible equipment is also automatically 
turned off.
•  A Panasonic DVD Recorder will not turn off if it is still in Rec mode.
•  The TV remains on even if the VIERA Link compatible equipment is turned off.
  Energy saving mode
Quick Start: When TV is turned off, all connected VIERA Link compatible equipment is moved to ECO Standby mode* 
automatically under these conditions.
•  Power off link:(Yes), The connected equipment has “HDAVI Control 4 or later (with Quick Start mode)”
* Minimum power consumption of Standby condition for the equipment.
Unselected device energy save
Yes: The connected VIERA Link compatible equipment will be turned off automatically when not in use under these 
conditions.
•  The connected equipment has “HDAVI Control 2 or later” (for available equipment only)
[ Example of timing for operation ]
•  When the input is switched from the HDMI.
  Default speakers
“TV” is the default setting. To set the Home theater system as Default speakers, change the Default sp\
eakers setting 
from “TV” to “Theater”. Sound will be output from the Home t\
heater whenever the TV is powered on.
Automatic lip-sync function
Minimizes lip-sync delays between the picture and audio when you connect\
 to a Panasonic theater system or 
Amplifier.
TV provided setting information
The following information about the TV settings can be transmitted to each piece of equipment (Recorder/Hom\
e 
theater/Player) that has “HDAVI Control 3 or later” function connected to a TV with an HDMI cable.
Transmittable dataRecorder Home theater Player
 On Screen Display Language setting 
(English/Español/Français)
|
|
|
 Panel Aspect Ratio(16:9 fixed)
|
|
|
 Closed caption information (Mode/CC type/Digital setting)
|--- ---
 Channel information 
(Input signal/Channel list/Caption information)
|--- ---
Note
 

”There is a possibility that all the GUI language information might be se\
t from equipment that has an HDMI CEC 
function connected to the TV with an HDMI cable. Depending on the operating conditions or the spec\
ification for 
each piece of equipment the setting may or may not be applied.
 

”For more details on the external equipment’s operation, please refer to the operating manual for the equipment.
UD@-@Y@FOH@JOEC


UD@-@Y@FOH@JOEC








 
						

							36
 
VIERA Link menu and Available features
Some features are disabled depending on the “HDAVI Control” version of the equipment. 
Please check the list (p. 32)
 Press to exit from a menu screen
 Press to go back to the previous 
screen
Display the VIERA Link menu
or
 select
 next
(example)
This function is not available depending on your country or area you sel\
ect. (p. 12)
Select the item
Recorder
TV
VIERA Link control
Speaker output
Back to TV
select
 

”Items in the VIERA Link menu may be grayed out 
if no compatible equipment is connected (must be 
HDAVI Control 2 or later) or if the equipment has 
not initiated a connection with the TV.  In that case, 
switch the equipment’s power Off and On while the 
TV is On.
For further details, see “VIERA Link” on page 34.
Select
Home theater
TV
VIERA Link control
Speaker output
Back to TVchange
Set
UD@-@Y@FOH@JOEC


UD@-@Y@FOH@JOEC








 
						

							37
Advanced
 VIERA Link
TM “HDAVI Control
TM”
Speaker control
You can select the Home theater or TV speakers for audio 
output.
Control the theater speakers with the TV remote control.
This function is available only when a Panasonic Amplifier 
or Player theater is connected.
 Select “Speaker output”
 Select “Home theater” or “TV”
 select
 changeRecorder
TVBack to TV VIERA Link control
Speaker output
 

vHome theater: Adjustment for the equipment
  Volume up / down  
 Mute   
• The sound of the TV is muted.
• When the equipment is turned off, the TV speakers 
take over.
• Selecting “Home theater” turns the equipment on 
automatically if it is in Standby mode.
 

vTV: The TV speakers are on.
  VIERA Link control only with the TV’s remote control
In the VIERA Link menu, you can select HDMI connected equipment and access it quickl\
y. Continue using your TV 
remote control to operate the equipment, pointing it at the TV.
 Select “VIERA Link control”  
   Select the equipment you want to access(Recorder/Home theater/Player/Camcorder/LUMIX/
Digital camera/ Network camera)
 

”Using VIERA TOOLS (p. 20)
 select
 change
You can select available items 
only. 
Recorder
TV
VIERA Link control
Speaker output
Back to TV
 

”If there is more than one equipment item, a number 
after the name indicates the number of items. (e.g. 
Recorder 1/Recorder 2/Recorder 3...) 
 

”The number of equipment items that can be connected 
is three for recorders, and a total of three for Home 
theater/Player/Camcorder/LUMIX/Digital camera/
Network camera.
Note
 

”There is a limit to the number of HDMI connectors.
   Operate the equipment with the TV remote 
control, pointing it at the TV
 

”To operate the equipment, read the manual of the 
equipment.
 

vAvailable TV remote control buttonsWhether an operation is available differs depending on the connected equipment. 
Move the cursor/SelectPlay
Set/AccessStop
Return to previous menuReverse/ForwardSUBMENUDisplay the functions 
menu on the equipmentSkip Reverse/Forward
Available when the purpose of the keys 
is displayed on screenPause
ExitClosed caption
Channel Up/DownSAP (Select Audio Mode)
-0-9Select digital subchannel
Back to TV
Returns the input selection of the device selected with the VIERA Link Control to the TV input.
Select “Back to TV”
 select
 OK
Recorder
TV
VIERA Link control
Speaker output
Back to TV
UD@-@Y@FOH@JOEC


UD@-@Y@FOH@JOEC








 
						

							38
Using  Network services
Available Network service and features
 

vUsing  EASY IPTV  p. 43
 

vUsing   DLNA feature (Home network)  p. 44This TV is a DLNA Certified™ product.
DLNA (Digital Living Network Alliance) is a standard that makes DLNA Certified digital electronics easier and more 
convenient to use on a home network. To learn more, visit www.dlna.org.
It allows you to share photos, videos and music stored in the DMS (for \
example, PC with windows 7 installed, etc.) 
connected to your home network, and enjoy watching them on the TV screen as DMP.
DMS (Digital Media Server)Ensure the connected equipment has a DLNA Certified media server.
Store photos, videos or music into the media server, and then you can watch them on the TV.
“Windows 7” is the server software that has been tested for the pe\
rformance with this TV (current as of January, 2011).
For installing, read the manual of the server software.
 

”The DLNA control function of Windows 7 is not supported with this TV. 

”When a server software for the media server is installed on the PC, the \
data may be at risk of being accessed 
by other people. Please take care of the settings and connections under \
the network circumstances at the office, 
hotel or even at home when not using a router.
DMP (Digital Media Player)Finds the content on DMS and provides playback.
 

vUsing   Network camera  p. 45
UD@-@Y@FOH@JOEC


UD@-@Y@FOH@JOEC








 
						

							39
Advanced
 
Network Connections
Contact your Broadband service providerNOTICE: If you don’t have Internet service by your local provider, please order a high-speed Internet service at 
no less than the following connection speed. If you already have such se\
rvice, make sure that the connection 
speed exceeds the following.
 

”Required speed (effective): at least 1.5 Mbps for SD and 6 Mbps for HD picture quality, respectively. 

”Dial-up Internet service cannot be used for EASY IPTV.
Select wired or wireless connectionIf the Cable/DSL modem is close to the TV and you have only one TV set, you may choose a wired connection. 
If the Cable/DSL modem is far from the TV and/or you have more TVs in the house, you may want to use a 
wireless network.
Connecting to the Internet
  Wired connection (Directly connected)If you are not using the network for connecting anything else but the TV, you could just connect the TV 
directly to the Cable/DSL Ethernet connection.
  Wired connection (Using Router)If you are using the network for connecting various equipments and want \
to connect the TV, you should use 
a router to connect the TV to the Internet
 Wireless connectionIf you are using the network for connecting various equipments and want \
to connect the TV, you could also 
use a   wireless LAN adapter and Access point to connect the TV to the Internet
Internet
Internet
A
B
C
LAN cable
LAN cable(shielded)
(shielded)
Back of TV
Back of TV
Modem
Modem
Hub, Router 
or
Access point
  Network 
camera
Ensure to use a LAN straight 
cable for this connection.
DLNA Certified 
media server 
(for example, PC, 
etc.)
Home network
(DLNA feature)
 

”To use only DLNA features or Network camera, you can operate the features without Broadb\
and network environment.
DLNA Certified 
media server  Network camera
LAN cable
(shielded)
Ensure to use a LAN cross 
cable for this connection.
Back of TV
 Using Network services
UD@-@Y@FOH@JOEC


UD@-@Y@FOH@JOEC








 
						

							40
 
Network settings
This is a setting for connecting to a broadband environment.
 

vPress to exit from 
a menu screen
 

vPress to go back to 
the previous screen
Display the menu
Select “Network settings”MenuSetup
1/2
ANT/Cable setupInput labels
Network settings
VIERA Link settings
ECO/energy saving Channel surf mode
Language
ClockAll
select
Select the settings and set select
 adjust
MenuNetwork settings
Network cameras list
Software update
Mac address Connection test
Network connectionWireless network
IP address/DNS settingsWireless (WiFi)
00-0b-97-7c-65-e9
Connection test
Check that the Network settings are as shown below, and then start “Connection test”.
  Select “Connection test” and press OK(It takes a while to cancel the test.)
 Displayed Connection test screen
Connection testCheck Ethernet cable connection
Validate IP address
Check for IP address duplication
Check connection to the Internet
Check communication with EASY IPTV server.
Test in progress...
 Complete Connection testSuccess-->Completion screen is displayed.Error-->Follow the directions on screen to complete the setting.If you perform the Proxy settings, check the Proxy address 
and the Proxy port number.
Network connection
Select Network type 
(Ethernet cable/Wireless (WiFi))
Wireless network (Confirm Current settings and status)
This setting is performed only when “Wireless (WiFi)” is selecte\
d in “Network connection” above. 

vDisplayed “Current settings and status” screen (If connected with\
 wireless LAN adapter) You can confirm the AP connection status.
(SSID/Wireless type/Security type/Encryption type/Connection status /Si\
gnal strength)
 Press “Wireless network”
(example)
 select
 OK
Wireless networkSSID :
Wireless type :
Security type:
Encryption type :
Connection status :
Signal strength :
Connect using these settings?
Ye s No
 When you change “Wireless network” -->Press “No”See “Sets / Changes wireless network setting” on p. 41 
and follow the directions on screen to complete the 
setting.
You need to be “Connected” to use network devices.
Please set Access point settings to “Connected”.
UD@-@Y@FOH@JOEC


UD@-@Y@FOH@JOEC