Panasonic 2" Electronic Hd View Finder Ajhvf20 Operating Instructions

ENGLISH
FRANÇAIS
2˝ Electronic HD View Finder
AJ-
AJ-
Operating Instructions 

E– 1
Caution:
OThe interior of this product contains high-voltage components. Do not
disassemble the product.
OBe careful not to point the eyepiece directly at the sun.
WARNING:
TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
FCC Note:
This device complies with Part 15 of the FCC Rules. To assure continued
compliance follow the attached installation instructions and do not make any
unauthorized modifications.
This equipment has been tested and found to comply...

E– 2
ENGLISH
Contents
Features   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E– 3
Specifications   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E– 3
Parts and Their Functions   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E– 4
Adjusting the Viewfinder   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

E– 3
Features
OThe high-resolution CRT delivers superb picture sharpness, making focusing easier.
OThe low-flare CRT makes the screen clear and easy on the eyes.
OThe large eyepiece aperture makes it possible to see the screen even when holding the
viewfinder at some distance from your eye.
OThe eyepiece is easily detachable.
OEasy, one-touch left-right and forward-backward position adjustment.
Power supply:DC 12 V (supplied by camera)
Power consumption:3.3 W (AJ-HVF20P)
3.8 W (AJ-HVF27P)
Specifications...

E– 4
ENGLISH
Parts and Their Functions
Displays a zebra pattern inside the viewfinder.
ON:Displays a zebra pattern.
OFF:No zebra pattern displayed.
The details of the display, such as the type of zebra pattern, will differ depending
on the camera used with the viewfinder. Refer to the instruction manual of the
camera for details. ZEBRA (Zebra Pattern) Switch
1
Controls the front tally lamp.
HIGH:Makes the front tally lamp brighter.
OFF:Turns the front tally lamp off.
LOW:Makes the front tally lamp...

E– 5
Lights when the VTR is recording and the TALLY switch is set to HIGH or LOW. Also,
flashes on and off as a warning indication, in the same manner as the REC lamp, inside
the viewfinder.
The brightness of the front tally lamp is controlled by the setting of the TALLY switch
(HIGH or LOW). Front Tally Lamp
6
Loosen this lever to adjust the viewfinder position in the forward, backward, right or left
direction. Viewfinder Forward-Backward/Left-Right Position Clamp Lever
7
Lights when the VCR is...

E– 6
ENGLISH
Parts and Their Functions
The lamp and picture tube indications will differ depending on the camera used with the
viewfinder.
Refer to the instruction manual of the camera for details. Internal LEDs
TALLY / REC
BATT
VTR
SAVE 

E– 7
OAdjusting the height of the mounting unit
Mounting unit
Screws1.Detach the two screws, the detach the
mounting unit.
Screws3.Secure the mounting unit in place with the two
screws.
2.Replace the three screws in the positions indicated as A
or B
from the present
positions and change the position of the metal fitting.
Adjusting the Viewfinder
Adjusting the Mounting Height of the Viewfinder
Metal fitting
Re-fix the metal fitting by fastening the screws together with the spring washer.
The mounting...

E– 8
ENGLISH
Adjusting the Viewfinder
Mounting the Viewfinder
Stopper screw
Detaching the Viewfinder
Stopper screw
3.Push the viewfinder down into place.
4.Tighten the stopper screw firmly.
2.Insert the plug into the connection jack of the viewfinder.

Be sure to insert the plug all the way into the connection jack.
1.Confirm that the POWER switch of the camera is “OFF”.
3.Disconnect the connection jack from the viewfinder cable connector.
2.Loosen the stopper screw and detach the viewfinder by pulling...

E– 9
Adjusting the Viewfinder
Position Adjustment
Lever
Viewfinder
1.Lift up the viewfinder forward-backward/left-right position clamp lever to disengage
the lock.
3.Adjust the position of the viewfinder by moving it forward, backward, left or right.
2.Loosen the viewfinder forward-backward/left-right position clamp lever.
4.Return the viewfinder forward-backward/left-right position clamp lever to the locked
position.