Panasonic 19" Class 720p Lcd Hdtv Tc L19c30 Owners Manual

							31
Advanced
 How to Use Menu Functions
 
●“Reset to default” will be grayed out if no changes are made in th\
e following menus: 
“Picture”, “PC adjustments”, “Audio” and “Closed ca\
ption”.
   Picture settings
Adjust the image or picture quality
Settings Items Item Description
Reset to defaults
Resets all picture adjustments to factory default settings except for “\
Advanced picture”.
 Picture mode VividProvides enhanced picture contrast and sharpness for viewing in a well-l\
it room.
StandardRecommended for normal viewing conditions with subdued room lighting.
CinemaFor watching movies in a darkened room. It provides a soft, film-like pi\
cture.
GameFor playing video games.
Custom (Photo)Customizes each item according to your taste.
Photo is displayed in JPEG menu.
 Back light Adjusts the luminance of the back light.
 Contrast, 
Brightness, Color, 
Tint, SharpnessAdjusts the color, brightness, etc. for each picture mode to suit your taste
• Display range Contrast/Brightness/Color/Sharpness  : 0 - 100
    Tint  : -50 - +50
 Color temp.Cool/Normal/WarmSelects a choice of Cool (blue), Normal, or Warm (red) color. 
 A.I. picture  Off/On Controls dark areas without affecting the black level or brightness in the overall picture.
 C.A.T.S. Off/OnAutomatically adjusts the screen brightness according to the ambient lig\
hting condition. 
 Video NR Off/OnReduces noise, commonly called snow. Leave it off when receiving a strong signal.
•  Some menus are grayed out depending on the input signal or condition. (e.g. “Zoom adjustments” will be grayed out if the aspect is not \
set to Zoom.)
 Aspect
adjustments Screen format JUST/4:3/ZOOM/
FULL/H-FILLChanges the format (aspect ratio). 
Lets you choose the aspect depending on the format of 
received signal. (p. 36)
H sizeSize 1/Size 2Adjusts the horizontal display range to reduce noise of both side 
edges of an image.
Size 2: Adjusts the image size according to the aspect mode to 
reduce noise. (p. 36)
Zoom 
adjustmentsAdjusts vertical alignment and size when aspect setting is “ZOOM”.\
 PC adjustments Reset to defaultsResets PC adjustments.
SyncH & VThe H and V sync signals are input from the HD/VD connector. (p. 39)
On greenUses a synchronized signal on the Video G signal, which is 
input from the G connector. (p. 39)
Dot clock Alleviates the problem if a picture appears to be vertically-striped, fl\
ickers partially or 
is blurred.
H-positionAdjusts the horizontal position.
V-positionAdjusts the vertical position.
Clock phaseAlleviates the problem if the whole picture appears to flicker or is blu\
rred.
First adjust the Dot Clock to get the best possible picture, then adjust\
 the clock Phase 
so that a clear picture appears.
 
●It may not be possible to display a clear picture due to poor input sign\
als.
Input
resolutionSwitches to wide display. 
●VGA (640×480 pixels), WVGA (852×480 pixels), XGA (1,024×768 pixels), WXGA 
(1,280×768 pixels)
 
●Options change depending on signals
H-frequency
V-frequencyDisplays the H (Horizontal)/V (Vertical) frequencies.
Display range
Horizontal: 15 - 110 kHz
Vertical:  48 - 120 Hz 
						

							32
Settings ItemsItem Description
•  Some menus are grayed out depending on the input signal or condition. (e.g. “3:2 pulldown” will be grayed out if the input signal is hi\
gh definition or you are viewing photos, etc.)
 Advanced 
picture   3D Y/C filter  Off/On
Minimizes noise and cross-color in the picture. 
 Color matrix SD/HDSelects image resolution of component-connected devices.
SD:  Standard Definition       HD:  High Definition       
Only used with 480p video signal.
 MPEG NR Off/OnReduces noise of specific digital signals of DVD, Cable box, etc. 
 Black level Dark/LightSelects Dark or Light. Valid only for external input signals. 
 3:2 pulldown Off/On/AutoAdjusts the picture recorded in 24 fps for optimum quality. 
  
Audio settings
Adjust Audio  quality
Settings Items Item Description
Reset to defaults Resets Bass, Treble, and Balance adjustments to factory default settings.
Bass Increases or decreases the bass response.
Treble Increases or decreases the treble response.
Balance Emphasizes the left / right speaker volume.
 Advanced audio Surround Off/On
Enhances audio L/R response when listening to stereo.
Volume levelerMinimizes volume disparity after switching to external inputs.
TV speakers Off/OnSwitches to “Off” when using external speakers.
Off: “Surround” and “Volume leveler” do not work if “Off” is 
selected.
HDMI in Digital/
Comp./VideoThe default setting is “Digital” for the HDMI connection. (Digita\
l 
input signal) 
Select audio input terminal when DVI cable is connected. 
(Analog audio input signal)
   Timer settings
The TV can automatically turn On/Off at the designated date and time.
If the Timer settings are grayed out, first set the clock (see p. 34) and make\
 sure  “Auto power on” is set to “No” (see p. 34)
Settings Items Item Description
 Sleep (Off timer) Sleep (minutes) 0/15/30/60/90
Select how long for the TV to automatically turn off.
Timer 1-5 
(On/Off timer) Timer setEnables or disables this timer. (Off/On)
InputsSets the input to select when the TV turns on.
ChannelSets the channel to select when the TV turns on.
DaySets the day when the TV turns on.
[SUN/MON/TUE/WED/THU/FRI/SAT(displays the nearest future date)
MON-FRI/SAT-SUN/DAILY/Every SUN/Every MON/Every TUE/Every
WED/Every THU/Every FRI/ Every SAT]
On timeSets the time when the TV turns on. The TV will turn off after 90 minutes or as 
specified.
Off timeSets the time when the TV turns off within 24 hours. 
						

							33
Advanced
 How to Use Menu Functions
  LockLocks specified channels or shows to prevent children from watching obje\
ctionable content.
You will be asked to enter your password each time you display the Lock m\
enu. 
•  Password setting/entering (p. 17)
Set “Custom” in “Mode” to specify “Channel”, “Game”\
 and “Program” settings.
Settings Items
Item Description
Mode Off
Unlocks all the Lock settings of “Channel”, “Game” and “P\
rogram”.
AllLocks all the inputs regardless of the Lock settings of “Channel”,\
 “Game” and 
“Program”.
CustomLocks specified inputs of “Channel”, ”Game” and “Program”\
.
Channel
(These channels 
will be blocked 
regardless of the 
program rating.)ModeSet channel lock status. (Off/All/Custom) 
All: Locks all channels 
Off: Unlocks all channels 
Custom: Locks specified channels. Set “Channel 1” - “Channel 7”\
Channel 1-7Select a channel to lock. (Select up to 7 (1-7) channels to block.)
Game
On/OffLocks Channel 3, Channel 4, and external inputs.
Program 
(To set a rating 
level)ModeSet program lock status. (Off/On) “V-chip” technology enables restricted shows to 
lock according to TV ratings. On: Set each rating level (MPAA, US.TV, C.E.L.R., 
C.F.L.R.)
MPAASelect U.S. movie ratings to lock.
For more 
information 
(p. 35)
U.S.TVU.S. TV program ratings.
C.E.L.R.Canadian English ratings.
C.F.L.R.Canadian French ratings.
Change 
passwordChange the password. Input the new 4-digit password twice.
•  This television is designed to support the “Downloadable U.S. Region \
Rating System” when available. (Available only in U.S.A.)
•  The Off rating is independent of other ratings.
•  When placing a lock on a specific-age-based-rating level, the Off rating and any other more restrictive ratings will also  be blocked.
  Closed caption Display closed caption
The television includes a built-in decoder that is capable of providing \
a text display of the audio.
The program being viewed must be transmitting the Closed caption (CC) \
information. (p. 38)
Settings Items Item Description
Reset to defaults Resets all Closed caption settings to factory default settings.
Mode On/Off/
CC on mute
On: To display Closed captions.
CC on mute: To display Closed captions when the audio is muted.
(When not using, select “Off”).
Analog CC1-4/T1-4Choose the Closed caption service of Analog broadcasting.
CC1-4: Information related to pictures (Appears at the bottom of the sc\
reen)
T1-4: Textual information (Appears over the entire screen)
DigitalPrimary/Second./
Service 3/4/5/6The Digital Closed caption menu lets you configure the way you choose to\
 view
the digital captioning.
Digital setting
(Set display 
settings
in digital program) SizeText size
FontText font
StyleText style (Raised, Depressed, etc.)
ForegroundColor of text
Fore. opacityOpacity of text
BackgroundColor of text box
Back. opacityOpacity of text box
OutlineOutline color of text (Identify the setting options on the screen.)
•  The settings in “Analog” or “Digital” depend on the broadcas\
ter. 
						

							34
 Setup
Other function settings
Settings Items
Item Description
 Channel surf 
mode All/Favorite/
Digital only/
Analog only
Sets the mode to select the channel with the Channel up/down button. 
Favorite: Only channels registered as FAVORITE. (p. 16)
 Language English/
Español/
FrançaisSelects the screen menu language.
ClockAdjusts the clock. (p. 14)
ANT/Cable setupSee p. 28-29 for more detail.
Input labels
(Display labels 
of connected 
devices) Selects the terminal and label of the external equipment.
Devices connected to external input terminals can be labeled for easier \
identification during the 
input selection. (Input select (p. 19))
T

erminals: HDMI/Comp./Video/PC
Label: [BLANK] Not used/Blu-ray/DVD/DVD REC/HOME THTR/GAME/COMPUTER/VCR/
CABLE/SATELLITE/DVR/CAMERA/MONITOR/AUX/RECEIVER/MEDIA CTR/MEDIA EXT/
OTHER
•  You can also enter the label name directly. (Entering characters (p. 17))
VIERA Link settingsSee p. 24-25 for more detail. 
 ECO/energy 
saving Power save 
(Standard/
Saving)Reduces screen brightness to lower power consumption. Eye-friendly for 
viewing in a dark room. 
No signal for 10 
minutes
(Stay on/ Power 
TV off)
To conserve energy, the TV automatically turns off when NO SIGNAL and NO 
OPERATION continue for more than 10 minutes.
•  Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set.
•  “No signal for 10 minutes was activated” will be displayed for abo\
ut 10 seconds  when the TV is turned on for the first time after the power was turned off by “No 
signal for 10 minutes”.
•  The on-screen display will flash 3, 2 and 1 to indicate the last three (\
3) remaining  minutes prior to the shut-off.
No activity for 3 
hours
(Stay on/ Power 
TV off)To conserve energy, the TV automatically turns off when no operation of remote and 
side panel key continues for more than 3 hours.
•  Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set, or while “PC input” is selected.
•  “No activity for 3 hours was activated” will be displayed for abou\
t 10 seconds when  the TV is turned on for the first time after the power was turned off by “No activity 
for 3 hours”.
•  The on-screen display will flash 3, 2 and 1 to indicate the last three (\
3) remaining  minutes prior to the shut-off.
Advanced setup  Auto power on
(No/Yes)Turns TV On automatically when the cable box or connected device is turned On.\
TV AC cord must be plugged into this device. TV turns on every time the power is restored.
 Image viewer 
auto playSlideshow/
Thumbnail/
Set later/OffSets the playback type to play back SD cards automatically. Set later: “Image viewer settings” menu will be displayed repeated\
ly.“Viewing photos with VIERA IMAGE VIEWER” (p. 20)
 First time setupRestarts the first time setup from “Language” setting. (p. 12)
AboutDisplays TV version and software license.
 Reset to defaultsPerforming Reset will clear all settings made with Setup, such as channe\
l 
settings.
•  Password setting/entering (p. 17) 
						

							35
Advanced
Support Information
 Ratings List for parental control
 How to Use Menu Functions
Ratings List for  parental control
“V-chip” technology enables you to lock channels or shows according to \
standard ratings set by the 
entertainment industry. 
 U.S. MOVIE RATINGS (MPAA)
NRNO RATING (NOT RATED) AND NA (NOT APPLICABLE) PROGRAMS. Movie which has not been rated or 
where rating does not apply.
G GENERAL AUDIENCES. All  ages  admitted.
PG PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.
PG-13 PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for children under 13. R RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NC-17 NO ONE 17 AND UNDER ADMITTED. X ADULTS ONLY.
 U.S. TV PROGRAMS RATINGS (U. S. TV)
Age-basedGroupAge-basedRatingsPossible Content Selections Description
NR
(Not Rated) TV-NR
• Viewable
• Blocked
Not Rated.
Youth TV-Y
• Viewable
• Blocked
All children. The themes and elements in this program are specifically
designed for a very young audience, including children from ages 2-6.
TV-Y7
• FV Blocked
• Viewable
• Blocked Directed to older children. Themes and elements in this program may
include mild physical or comedic violence, or may frighten children 
under the age of 7.
Guidance TV-G
• Viewable
• Blocked
General audience. It contains little or no violence, no strong language,\
and little or no sexual dialogue or situations.
TV-PG
• D,L,S,V (all selected)
• Any combination of 
D, L, S, V Parental guidance suggested. The program may contain infrequent
coarse language, limited violence, some suggestive sexual dialogue 
and situations.
TV-14
• D,L,S,V (all selected)
• Any combination of 
D, L, S, V Parents strongly cautioned. This program may contain sophisticated
themes, sexual content, strong language and more intense violence.
TV-MA
• L,S,V (all selected)
• Any combination of 
L, S, V Mature audiences only. This program may contain mature themes,
profane language, graphic violence, and explicit sexual content.
FV:  Fantasy/Cartoon Violence. V:  Violence S:  Sex L:  Offensive Language D:  Dialogue with sexual content.
 CANADIAN ENGLISH RATINGS (C. E. L. R.)
E Exempt - Exempt programming includes:  news, sports, documentaries and o\
ther information programming,
talk shows, music videos, and variety programming.
C Programming intended for children under age 8. No offensive language, nudity or sexual content.
C8+
Programming generally considered acceptable for children 8 years and ove\
r. No profanity, nudity or sexual content.G General programming, suitable for all audiences.
PG Parental Guidance suggested. Some material may not be suitable for child\
ren.
14+ Programming contains themes or content which may not be suitable for vie\
wers under the age of 14. Parents 
are strongly cautioned to exercise discretion in permitting viewing by p\
re-teens and early teens.
18+ 18+ years old. Programming restricted to adults. Contains constant viole\
nce or scenes of extreme violence.
 CANADIAN FRENCH RATINGS (C. F. L. R.)E Exempt - Exempt programming.
G General - Programming intended for audience of all ages. Contains no vio\
lence, or the violence content is 
minimal or is depicted appropriately.
8 ans+ 8+ General - Not recommended for young children. Programming intended fo\
r a broad audience but contains 
light or occasional violence. Adult supervision recommended.
13 ans+ Programming may not be suitable for children under the age of 13 - Conta\
ins either a few violent scenes or one 
or more sufficiently violent scenes to affect them. Adult supervision strongly suggested.
16 ans+ Programming may not be suitable for children under the age of 16 - Conta\
ins frequent scenes of violence or 
intense violence.
18 ans+ Programming restricted to adults. Contains constant violence or scenes o\
f extreme violence.
Caution
 The V-Chip system that is used in this set is capable of blocking “NR” \
programs (non rated, not applicable and none) as per 
FCC Rules Section15.120(e)(2). If the option of blocking “NR” \
programs is chosen “unexpected and possibly confusing results 
may occur, and you may not receive emergency bulletins or any of the following ty\
pes of programming:”
  • Emergency Bulletins (Such as EAS messages, weather warnings and ot\
hers)
  • Locally originated programming • News • Political • Public\
 Service Announcements • Religious • Sports • Weather 
						

							36
 Technical Information
 Aspect Ratio (FORMAT)
Press the FORMAT button to cycle through the aspect modes. This lets you choose the aspect depending on the format 
of the received signal and your preference. (p. 16) 
(e.g.:  in case of 4:3 image)
 FULL JUST
FULL JUST 
Enlarges the 4:3 image horizontally to the screen’s side edges.
(Recommended for anamorphic picture)Stretches to justify the 4:3 image to the four corners of the 
screen. 
(Recommended for normal TV broadcast)
 H-FILL 4:3
H-FILL 
Side bar
Enlarges the 4:3 image horizontally to the screen’s side 
edges. The side edges of the image are cut off.Standard
(Note that “Image retention” of the side bar may occur from
displaying it for a long time.)
  
ZOOM
ZOOM Note
  480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9):  
  FULL, JUST, 4:3 or ZOOM
  1080p / 1080i / 720p:  
  FULL, H-FILL, JUST, 4:3 or ZOOM
Enlarges the 4:3 image to the entire screen. 
(Recommended for Letter Box)
 Zoom adjustments
  Vertical image position and size can be adjusted in “ZOOM”.
 
 Select “Zoom adjustments” on the “Picture” menu. (p. 31)
  V-position:  Vertical position adjustment       V-size:  Vertical size adjustment
         
  To reset the aspect ratio   (OK)
H size
 Aspect Ratio: 4:3
Size 1 Size 2  The width will be decreased on both sides to 
reduce noise.
 Aspect Ratio: FULL/JUST(H-FILL/ZOOM)
Size 1 Size 2  The width will be increased on both sides to 
reduce noise.
See page 31 for more information 
						

							37
Support Information
 Technical Information
Data format for  SD Card browsing
Photo:Still images recorded with digital still cameras compatible with JPEG fi\
les of DCF* and EXIF** 
standards
Data format: Baseline JPEG (Sub-sampling: 4:4:4, 4:2:2 or 4:2:0)
Max. number of files: 9,999
Image resolution: 160 x 120 to 20,000,000
 * DCF (Design rule for camera file system):  A Japan Electronics and Information Technology Industries Association’s standard  ** EXIF (Exchangeable Image File Format)
Caution
  A JPEG image modified with a PC may not be displayed.  Partly degraded files might be displayed at a reduced resolution.
Note
  Folder structure viewed in PC
 
DCIM 
P1000001.JPG 
P1000002.JPG 
P1000003.JPG 
P1000004.JPG 
100_ P ANA 
Created automatically
3-digit folder number + 5-digit arbitrary characters
4-digit arbitrary characters + 4-digit file number
  Usable characters:  1-byte “a to z”, “A to Z”, “0 to 9,” and “_”
  The folder and file names may be different depending on the digital camera used.  For the suitable SD Memory Cards, please confirm the latest information \
on the following website.
  http://panasonic.jp/support/global/cs (This site is in English only)
Cautions when handling  SD Cards
2.1 mm
32 mm
24 mm
  Use an SD Card which meets SD standards. If not, it may cause the TV to malfunction.  Do not remove the card while the unit is accessing data (this can damag\
e card or unit).  Do not touch the terminals on the back of the card.  Do not subject the card to high pressure or impact.  Insert the card in the correct direction (otherwise, card or unit may b\
e damaged).  Electrical interference, static electricity or erroneous operation may d\
amage the data or card.  Back up the recorded data at regular intervals in case of deteriorated o\
r damaged data or  erratic operation of the unit. (Panasonic is not liable for any deterio\
ration or damage of recorded data.)
 SD Card warning messages
Message Meaning
SD card slot is empty.  The card is not inserted.
No photos  The card has no data or this type of data is not supported.
Cannot read file  The file is broken or unreadable.  The TV does not support the format.
VIERA LinkTM “HDAVI ControlTM”
HDMI connections to some Panasonic equipment allows you to interface aut\
omatically. (p. 23)  This function may not work normally depending on the equipment condition\
.  The equipment can be operated by other remote controls with this functio\
n on even if TV is in Standby mode.  Image or sound may not be available for the first few seconds when the p\
layback starts.  Image or sound may not be available for the first few seconds when Input\
 mode is switched.  Volume function will be displayed when adjusting the volume of the equipm\
ent.  If you connect equipment that has “HDAVI Control 2 or later” function to the TV with HDMI cable, the sound from DIGITAL 
AUDIO OUT terminal can be output as multi channel surround.
  “HDAVI Control 5” is the newest standard (current as of December, 2010) for the HDAVI Control compatible equipment.
  This standard is compatible with the conventional HDAVI equipment. 
						

							38
 HDMI connection
HDMI (high-definition multimedia interface) allows you to enjoy high-d\
efinition digital images and high-quality sound by connecting 
the TV unit and HD devices.
HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, su\
ch as a Cable or Satellite box or a DVD player, can be 
connected to the HDMI connector using an HDMI compliant (fully wired) \
cable.
  HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard.  If the external equipment has only a DVI output, connect to the HDMI ter\
minal via a DVI to HDMI adapter cable (*2).  When the DVI to HDMI adapter cable is used, connect the audio cable to t\
he audio input terminal.  Audio settings can be made on the “HDMI in” menu screen. (p. 32)\
Applicable audio signal sampling frequencies (L.PCM):  48 kHz, 44.1 kH\
z, 32 kHz
  (*1):  The HDMI logo is displayed on an HDMI-compliant device. 
  (*2):  Enquire at your local digital equipment retailer shop.
Caution
  Use with a PC is not assumed.  All signals are reformatted before being displayed on the screen.  If the connected device has an aspect adjustment function, set the aspec\
t ratio to “16:9”.  These HDMI connectors are “type A”.  These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection.  A device having no digital output terminal may be connected to the input \
terminal of either “COMPONENT” or “VIDEO” to 
receive analog signals.
  The HDMI input terminal can be used with only the following image signal\
s:  480i, 480p, 720p, 1080i, 1080p.Match the output setting of the digital device.
  For details of the applicable HDMI signals, see p. 39.
DIGITAL AUDIO OUT terminal
You can enjoy your Home theater by connecting a Dolby Digital (5.1 chann\
el) decoder and “Multi Channel” amplifier to the 
DIGITAL AUDIO OUT terminals. 
Caution
 Depending on your DVD player and DVD-Audio software the copyright protec\
tion function may operate and disable optical 
output.
  When an ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When an NTSC channel is selected, the output will be PCM.
 Closed Caption (CC)
  For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST, ZOOM or 4:3; 
characters might be cut off).  
  The CC can be displayed on the TV only when the receiver (such as a Cable box or satellite receiver) \
has the CC set to ON within the device itself.  Check with your Cable or Satellite prov\
ider for instructions. The TV’s CC button does 
not operate the Satellite or Cable box’s CC function. 
  If the CC is set to On on both the receiver and TV when the signal is 480i (except for the HDMI connection), the CC may overlap on the TV.
  If a digital program is being output in analog format, the CC data will \
also be output in analog format.   If the recorder or output monitor is connected to the TV, the CC needs to be set up on the recorder or output monitor. 
						

							39
Support Information
 Technical Information
PC Input Terminals Connection
  Signal Names for D-sub 15P Connector
Pin No.Signal NamePin No.Signal NamePin No.Signal Name
RGND (Ground)NC (not connected)GGND (Ground)NCBGND (Ground)HD/SYNCNC (not connected)NC (not connected)VD
GND (Ground)GND (Ground)NCPin Layout for PC Input Terminal
1 
678 
3 9 
45 10  15 14 13 12 11 2 
Input signal that can be displayed
* Mark: Applicable input signal for Component (Y, PB, PR), HDMI and  PC
horizontal frequency (kHz) vertical frequency (Hz) COMPONENT HDMI PC
525 (480) / 60i 15.7359.94**525 (480) /60p 31.4759.94**750 (720) /60p 45.0059.94**1,125 (1,080) /60i 33.7559.94**1,125 (1,080)/60p 67.4359.94*1,125 (1,080)/60p 67.5060.00*1,125(1,080)/24p 26.9723.98*1,125(1,080)/24p 27.0024.00*640 × 400 @70 31.4770.08*640 × 480 @60 31.4759.94*Macintosh13” (640 × 480) 35.0066.67*640 × 480 @75 37.5075.00*852 × 480 @60 31.4459.89*800 × 600 @60  37.8860.32*800 × 600 @75  46.8875.00*800 × 600 @85 53.6785.08*Macintosh16” (832 × 624) 49.7374.55*1,024 × 768 @60 48.3660.00*1,024 × 768 @70 56.4870.07*1,024 × 768 @75 60.0275.03*1,024 × 768 @85 68.6885.00*Macintosh 21” (1,152 × 870) 68.6875.06*1,280 × 768 @60 47.7859.87*1,280 × 1,024 @60  63.9860.02*1,366 × 768 @60  48.3960.04*
Note
  Signals other than above may not be displayed properly.  The above signals are reformatted for optimal viewing on your display.  Computer signals which can be input are those with a horizontal scanning\
 frequency of 15 to 110 kHz and vertical scanning  frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 l\
ines.)
Panasonic does not guarantee operation and performance of peripheral dev\
ices made by other manufacturers; and we 
disclaim any liability or damage arising from operation and/or performan\
ce from usage of such other maker’s peripheral 
devices. 
						

							40
 Care and Cleaning
First, unplug the Power cord plug from the wall outlet.
Display panel
The front of the display panel has been specially treated. Wipe the pane\
l surface gently using only a cleaning cloth or a soft, lint-
free cloth.
  If the surface is particularly dirty, soak a soft, lint-free cloth in diluted mild liquid dish soap (1 part\
 mild liquid dish soap diluted by 100 times the amount of water) and then wring the cloth to remove ex\
cess liquid. Use this cloth to wipe the surface of the 
display panel, then wipe it evenly with a dry cloth of the same type unt\
il the surface is dry.
  Do not scratch or hit the surface of the panel with fingernails or other\
 hard objects. Furthermore, avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the \
quality of the surface may be adversely affected.
Cabinet
If the cabinet becomes dirty, wipe it with a soft, dry cloth.  If the cabinet is particularly dirty, soak the cloth in a weak mild liquid dish soap and then wring the clot\
h dry. Use this cloth to wipe the cabinet and then wipe it dry with a dry cloth.
  Do not allow any mild liquid dish soap to come into direct contact with \
the surface of the LCD TV. If water droplets get inside the unit, operating problems may result.
  Avoid contact with volatile substances such as insect sprays, solvents, a\
nd thinner; otherwise, the quality of the cabinet surface may be adversely affected or the coating may peel off. 
  Do not let articles made from rubber or PVC be in contact with the TV for long periods of time.
Pedestal
 CleaningWipe the surfaces with a soft, dry cloth. If the unit is particularly di\
rty, clean it using a cloth soaked with water to which a small 
amount of mild liquid dish soap has been added and then wipe with a dry \
cloth.
Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage the surface coating.\
 
(If using a chemically-treated cloth, follow the instructions supplied \
with the cloth.)
  Do not attach sticky tape or labels, as they can make the surface of the\
 pedestal dirty. Do not allow long-term contact with rubber, vinyl products, or the like. (Doing so will cause deterioration.)
Power cord plug
Wipe the plug with a dry cloth at regular intervals. (Moisture and dust\
 can lead to fire or electrical shock.)