Home
>
Panasonic
>
Wireless
>
Panasonic 11mbps Wireless Lan Pc Card Kx Hgc200 Operating Instructions
Panasonic 11mbps Wireless Lan Pc Card Kx Hgc200 Operating Instructions
Have a look at the manual Panasonic 11mbps Wireless Lan Pc Card Kx Hgc200 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 26
26
Ò Installing the KX-HGC200 to a Computer
4
In the PCMCIA socket list, confirm ?mark or !mark is not followed
by the PCMCIA socket.
³If ?markor !mark is followed, device driver of the PC card socket is not
properly installed. Refer to the manual of your computer and re-install the
proper device driver first, then insert the KX-HGC200.
5
Click [Close].
6
Click [OK]to close the window.
To save the boot up time when the Ethernet adapter is
attached or equipped to your computer
If the Ethernet adapter that...](http://img.usermanuals.tech/thumb/58/66643/w64_kx-hgc200_en_om_d-25.png "Page 26
26
Ò Installing the KX-HGC200 to a Computer
4
In the PCMCIA socket list, confirm ?mark or !mark is not followed
by the PCMCIA socket.
³If ?markor !mark is followed, device driver of the PC card socket is not
properly installed. Refer to the manual of your computer and re-install the
proper device driver first, then insert the KX-HGC200.
5
Click [Close].
6
Click [OK]to close the window.
To save the boot up time when the Ethernet adapter is
attached or equipped to your computer
If the Ethernet adapter that...")
![Page 29
29For assistance, please call: 1-800-272-7033
Installation
Ò
Installing the device driver
When the KX-HGC200 is inserted into a computer, Windows operating
system (Windows 95/98/Me) will automatically detect it and the Update
Device Driver Wizard(For Windows 95) or Add New Hardware Wizard
will appear.
For Windows 95!
1
Click [Next].
2
Click [Other Locations].
³For using the Windows 95, follow the steps from this page.
³For using the Windows 98, follow the steps from p. 32.
³For using the Windows Me,...](http://img.usermanuals.tech/thumb/58/66643/w64_kx-hgc200_en_om_d-28.png "Page 29
29For assistance, please call: 1-800-272-7033
Installation
Ò
Installing the device driver
When the KX-HGC200 is inserted into a computer, Windows operating
system (Windows 95/98/Me) will automatically detect it and the Update
Device Driver Wizard(For Windows 95) or Add New Hardware Wizard
will appear.
For Windows 95!
1
Click [Next].
2
Click [Other Locations].
³For using the Windows 95, follow the steps from this page.
³For using the Windows 98, follow the steps from p. 32.
³For using the Windows Me,...")
![Page 30
30
Ò Installing the KX-HGC200 to a Computer
3
Place the CD-ROM labeled Panasonic 11Mbps Wireless LAN
Setup CD-ROM in the CD-ROM drive of your computer.
4
In the Select Other Locationdialog box, after clicking [Browse]
and choosing the directory where the device driver is located,
click
[OK].
³To specify, type “D:\software\win95” (depending on the drive name of
your CD-ROM drive).
³Clicking [Browse]will help you specify the directory.
5
Click [Finish].
³The device driver will be installed to your...](http://img.usermanuals.tech/thumb/58/66643/w64_kx-hgc200_en_om_d-29.png "Page 30
30
Ò Installing the KX-HGC200 to a Computer
3
Place the CD-ROM labeled Panasonic 11Mbps Wireless LAN
Setup CD-ROM in the CD-ROM drive of your computer.
4
In the Select Other Locationdialog box, after clicking [Browse]
and choosing the directory where the device driver is located,
click
[OK].
³To specify, type “D:\software\win95” (depending on the drive name of
your CD-ROM drive).
³Clicking [Browse]will help you specify the directory.
5
Click [Finish].
³The device driver will be installed to your...")
![Page 31
31For assistance, please call: 1-800-272-7033
Installation
While a computer is restarting, mind below notification.
³If the KX-HGC200 has been installed to a computer, restarting
may take about a few minutes.
³To prevent a device from being damaged or broken, never
turn off a computer while restarting.
Ò
³If the Insert Diskdialog box appears, remove the CD-ROM which came
with the KX-HGC200, then insert the Windows 95 CD-ROM and click
[OK].
6
Restart the computer.
The device driver has been successfully...](http://img.usermanuals.tech/thumb/58/66643/w64_kx-hgc200_en_om_d-30.png "Page 31
31For assistance, please call: 1-800-272-7033
Installation
While a computer is restarting, mind below notification.
³If the KX-HGC200 has been installed to a computer, restarting
may take about a few minutes.
³To prevent a device from being damaged or broken, never
turn off a computer while restarting.
Ò
³If the Insert Diskdialog box appears, remove the CD-ROM which came
with the KX-HGC200, then insert the Windows 95 CD-ROM and click
[OK].
6
Restart the computer.
The device driver has been successfully...")
![Page 32
32
Ò Installing the KX-HGC200 to a Computer
For Windows 98!
1
Click [Next].
2
Select “Search for the best driver for your device [Recommended]”
and click
[Next].
3
Place the CD-ROM labeled Panasonic 11Mbps Wireless LAN Setup
CD-ROM in the CD-ROM drive of your computer.
1229; 1.](http://img.usermanuals.tech/thumb/58/66643/w64_kx-hgc200_en_om_d-31.png "Page 32
32
Ò Installing the KX-HGC200 to a Computer
For Windows 98!
1
Click [Next].
2
Select “Search for the best driver for your device [Recommended]”
and click
[Next].
3
Place the CD-ROM labeled Panasonic 11Mbps Wireless LAN Setup
CD-ROM in the CD-ROM drive of your computer.
1229; 1.")
![Page 33
33For assistance, please call: 1-800-272-7033
Installation
Ò
4
Select “CD-ROM drive” and specify the directory where the device
driver is located, and click
[Next].
³To specify, select “Specify a location” and type “D:\software\win98”
(depending on the drive name of your CD-ROM drive).
³Clicking [Browse]will help you specify the directory.
5
Click [Next].
³The device driver will be installed to your computer.
³If the Insert Diskdialog box appears, remove the CD-ROM which came
with the KX-HGC200, then...](http://img.usermanuals.tech/thumb/58/66643/w64_kx-hgc200_en_om_d-32.png "Page 33
33For assistance, please call: 1-800-272-7033
Installation
Ò
4
Select “CD-ROM drive” and specify the directory where the device
driver is located, and click
[Next].
³To specify, select “Specify a location” and type “D:\software\win98”
(depending on the drive name of your CD-ROM drive).
³Clicking [Browse]will help you specify the directory.
5
Click [Next].
³The device driver will be installed to your computer.
³If the Insert Diskdialog box appears, remove the CD-ROM which came
with the KX-HGC200, then...")
![Page 34
34
Ò Installing the KX-HGC200 to a Computer
6
Click [Finish].
7
Click [Yes]to restart the computer.
³If the above dialog box does not appear, restart the computer manually.
The device driver has been successfully installed to your computer. After
the computer restarts, refer to p. 38 and install the Network Manager
software.
While a computer is restarting, mind below notification.
³If the KX-HGC200 has been installed to a computer, restarting
may take about a few minutes.
³To prevent a device from being...](http://img.usermanuals.tech/thumb/58/66643/w64_kx-hgc200_en_om_d-33.png "Page 34
34
Ò Installing the KX-HGC200 to a Computer
6
Click [Finish].
7
Click [Yes]to restart the computer.
³If the above dialog box does not appear, restart the computer manually.
The device driver has been successfully installed to your computer. After
the computer restarts, refer to p. 38 and install the Network Manager
software.
While a computer is restarting, mind below notification.
³If the KX-HGC200 has been installed to a computer, restarting
may take about a few minutes.
³To prevent a device from being...")
![Page 35
35For assistance, please call: 1-800-272-7033
Installation
Ò
For Windows Me!
1
Select “Specify the location of the driver (Advanced)” and click
[Next].
2
Place the CD-ROM labeled Panasonic 11Mbps Wireless LAN Setup
CD-ROM in the CD-ROM drive of your computer.
3
Select “Search for the best driver for your device (Recommended).”,
select “Removable Media (Floppy, CD-ROM...)” and specify the
directory where the device driver is located and click
[Next].
³To specify, select “Specify a location” and type...](http://img.usermanuals.tech/thumb/58/66643/w64_kx-hgc200_en_om_d-34.png "Page 35
35For assistance, please call: 1-800-272-7033
Installation
Ò
For Windows Me!
1
Select “Specify the location of the driver (Advanced)” and click
[Next].
2
Place the CD-ROM labeled Panasonic 11Mbps Wireless LAN Setup
CD-ROM in the CD-ROM drive of your computer.
3
Select “Search for the best driver for your device (Recommended).”,
select “Removable Media (Floppy, CD-ROM...)” and specify the
directory where the device driver is located and click
[Next].
³To specify, select “Specify a location” and type...")
![Page 36
36
Ò Installing the KX-HGC200 to a Computer
4
Select “The updated software (Recommended)” and click [Next].
5
Click [Next].
³The device driver will be installed to your computer.
1229; 1.](http://img.usermanuals.tech/thumb/58/66643/w64_kx-hgc200_en_om_d-35.png "Page 36
36
Ò Installing the KX-HGC200 to a Computer
4
Select “The updated software (Recommended)” and click [Next].
5
Click [Next].
³The device driver will be installed to your computer.
1229; 1.")
31For assistance, please call: 1-800-272-7033 Installation While a computer is restarting, mind below notification. ³If the KX-HGC200 has been installed to a computer, restarting may take about a few minutes. ³To prevent a device from being damaged or broken, never turn off a computer while restarting. Ò ³If the Insert Diskdialog box appears, remove the CD-ROM which came with the KX-HGC200, then insert the Windows 95 CD-ROM and click [OK]. 6 Restart the computer. The device driver has been successfully installed to your computer. After the computer restarts, refer to p. 38 and install the Network Manager software. 1229; 1.
32 Ò Installing the KX-HGC200 to a Computer For Windows 98! 1 Click [Next]. 2 Select “Search for the best driver for your device [Recommended]” and click [Next]. 3 Place the CD-ROM labeled Panasonic 11Mbps Wireless LAN Setup CD-ROM in the CD-ROM drive of your computer. 1229; 1.
33For assistance, please call: 1-800-272-7033 Installation Ò 4 Select “CD-ROM drive” and specify the directory where the device driver is located, and click [Next]. ³To specify, select “Specify a location” and type “D:\software\win98” (depending on the drive name of your CD-ROM drive). ³Clicking [Browse]will help you specify the directory. 5 Click [Next]. ³The device driver will be installed to your computer. ³If the Insert Diskdialog box appears, remove the CD-ROM which came with the KX-HGC200, then insert the Windows 98 CD-ROM and click [OK]. 1229; 1.
34 Ò Installing the KX-HGC200 to a Computer 6 Click [Finish]. 7 Click [Yes]to restart the computer. ³If the above dialog box does not appear, restart the computer manually. The device driver has been successfully installed to your computer. After the computer restarts, refer to p. 38 and install the Network Manager software. While a computer is restarting, mind below notification. ³If the KX-HGC200 has been installed to a computer, restarting may take about a few minutes. ³To prevent a device from being damaged or broken, never turn off a computer while restarting. 1229; 1.
35For assistance, please call: 1-800-272-7033 Installation Ò For Windows Me! 1 Select “Specify the location of the driver (Advanced)” and click [Next]. 2 Place the CD-ROM labeled Panasonic 11Mbps Wireless LAN Setup CD-ROM in the CD-ROM drive of your computer. 3 Select “Search for the best driver for your device (Recommended).”, select “Removable Media (Floppy, CD-ROM...)” and specify the directory where the device driver is located and click [Next]. ³To specify, select “Specify a location” and type “D:\software\winMe” (depending on the drive name of your CD-ROM drive). ³Clicking [Browse]will help you specify the directory. 1229; 1.
36 Ò Installing the KX-HGC200 to a Computer 4 Select “The updated software (Recommended)” and click [Next]. 5 Click [Next]. ³The device driver will be installed to your computer. 1229; 1.
37For assistance, please call: 1-800-272-7033 Installation Ò 6 Click [Finish]. 7 Click [Yes]to restart the computer. ³If the above dialog box does not appear, restart the computer manually. The device driver has been successfully installed to your computer. After the computer restarts, refer to p. 38 and install the Network Manager software. While a computer is restarting, mind below notification. ³If the KX-HGC200 has been installed to a computer, restarting may take about a few minutes. ³To prevent a device from being damaged or broken, never turn off a computer while restarting. 1229; 1.
38 Ò Installing the KX-HGC200 to a Computer Installing the Network Manager After the device driver has been installed to a computer, the computer restarts and the installation of the Network Manager software starts automatically. 1 Click [Next]and start the setup. ³The Software License Agreementdialog box appears. 2 Click [Yes]after you have read all the contents and if you agree with the end user agreement on the dialog box. 1229; 1.
39For assistance, please call: 1-800-272-7033 Installation Ò 3 Click [Next]. ³If you want to specify a directory, clicking [Browse]will help you. ³The Network Manager software will be installed to your computer. 1229; 1.
40 Ò Installing the KX-HGC200 to a Computer 4 Enter the network name (i.e, John6919) in the data field and click [Next]. ³The data setting field is notcase-sensitive. 5 Select “Yes, I want to restart my computer now” and click [Finish]. ³The computer restarts. About the network name To communicate with others in a wireless group, the same Network Name must be programmed into each computer. It is impossible to communicate with a computer that has a different Network Name. To join a wireless network, it is necessary to enter the Network Name that is common to that particular network. For security, specify a unique Network Name that others do not guess, using more than 8 digits or characters, for a wireless network. 1229; 1.