Panasonic 1080l Multi Purpose Digital Camera Ak Hc910p Operating Instructions

							21

   PED,GAMMA,FLARE

   M PED                :+027
   R PED                :+000
   B PED                :+000
   M GAMMA              :0.45
   R GAMMA              :+00
   B GAMMA              :+00
   R FLARE              :010
   G FLARE              :000
   B FLARE              :017
   GAMMA                :ON
   FLARE                :ON

°° °°
Setting of Menu Items
!Maintenance menu
2Pedestal, gamma, flare adjustment
menu
M PED:Master pedestal can be
adjusted only by turning the control
panel VR.
The R, G, B pedestal can be totally
adjusted.
R, B PED:R, B pedestal adjustment.
Besides the master pedestal
adjustment, R, B pedestal can be
independently adjusted. It is not related
to DATA REF. The numeral display
after normal ending of ABB is “0” for
both of R, B.
M GAMMA:Master gamma adjustment.
The R, G, B gamma can be totally
adjusted.
R, B GAMMA:R, B gamma adjustment.
Besides the master gamma adjustment,
R, B gamma can be independently
adjusted.
R FLARE:R flare adjustment
G FLARE:G flare adjustment
B FLARE:B flare adjustment
GAMMA:Gamma ON/OFF setting
FLARE:Flare ON/OFF setting 
						

							22

   KNEE,WHITE CLIP

   M KNEE POINT         :95.00%
   R KNEE POINT         :+00.00%
   B KNEE POINT         :+00.00%
   M KNEE SLOPE         :95.00%
   R KNEE SLOPE         :+000
   B KNEE SLOPE         :+000
   A.KNEE POINT         :95.00%
   A.KNEE LVL           :108
   WHITE CLIP LVL       :109%
   KNEE                 :MANU
   WHITE CLIP           :ON




°° °°
Setting of Menu Items
!Maintenance menu
3Knee&white clip adjustment menu
M KNEE POINT:Master knee point
adjustment. 
G, B, R knee point can be totally
adjusted.
R, B KNEE POINT:R, B knee point
adjustment. 
Besides the master knee point
adjustment, R, B knee point can be
independently adjusted.
M KNEE SLOPE:Master knee slope
adjustment. 
G, B, R knee slope can be totally
adjusted.
R, B KNEE SLOPE:R, B knee slope
adjustment. 
Besides the master knee slope
adjustment, R, B knee slope can be
independently adjusted.
A. KNEE POINT:Auto knee point
setting. Knee point in auto knee mode is
set.
A. KNEE LVL:Auto knee level.
WHITE CLIP LVL:White clip level
adjustment.
Video level with white clipped is set.
KNEE:KNEE mode
(OFF/MANU/AUTO) 
OFF: Knee function is turned OFF.
MANU: Knee function is adjustable with
menu. 
AUTO: Auto knee function is executed.
WHITE CLIP:White clip operation
setting. 
With it ON, white clip is effective. 
						

							23

   R/B GAIN

   R GAIN               :+000
   B GAIN               :+000


°°°°
   DTL

   DTL                  :ON
   TOTAL DTL LVL        :+00
   H DTL LVL            :11
   CRISP                :02
   LVL DEPENDENT        :2
   PEEK FREQUENCY       :10
   KNEE APERTURE        :ON
   KNEE APA.LVL         :10
   SLIM DTL             :OFF
   DTL(+)               :+00
   DTL(-)               :+00
   DTL CLIP             :0
   DTL SOURCE           :(B+G)/2 

°° °°
Setting of Menu Items
!Maintenance menu
4Gain adjustment menu
The gain of R, B GAIN is adjusted.
The difference from the state of being
white-balanced can be adjusted.
• The numeral value displayed after
normal ending of AWB is “0” for both
of R, B.
5Detail adjustment menu
DTL:Setting of valid/invalid of detail
function.
TOTAL DTL LVL:Horizontal and
vertical detail level adjustment.
H DTL LVL:Horizontal DTL component
is adjusted independently of DTL
adjusted by TOTAL DTL.
CRISP:It functions to eliminate slight
detail component and to reduce the
noise level.
LVL DEPENDENT:It suppresses the
detail of low brightness level. The
brightness level to be suppressed is
adjusted here.
PEAK FREQUENCY:It lifts up the
detail component, and selects the
central frequency.
KNEE APERTURE:It functions to
emphasizes the detail component of the
portion with knee applied.
KNEE APA.LVL:It sets the degree of
knee aperture.
SLIM DTL:It validates the function of
slimming the portion where the detail is
thick and emphasized. 
						

							24
   DTL

   DTL                  :ON
   TOTAL DTL LVL        :+00
   H DTL LVL            :11
   CRISP                :02
   LVL DEPENDENT        :2
   PEEK FREQUENCY       :10
   KNEE APERTURE        :ON
   KNEE APA.LVL         :10
   SLIM DTL             :OFF
   DTL(+)               :+00
   DTL(-)               :+00
   DTL CLIP             :0
   DTL SOURCE           :(B+G)/2 

°° °°

   GAIN,AUTO IRIS

   LOW GAIN             :0dB
   MID GAIN             :9dB
   HIGH GAIN            :18dB
   A.IRIS LVL           :082
   A.IRIS PEAK/AVG      :075
   A.IRIS WINDOW        :NORM1
   IRIS MODE            :LENS
   IRIS GAIN            :06

°° °°
Setting of Menu Items
!Maintenance menu
5Detail adjustment menu 
(continued from previous page)
DTL (+):Setting of DTL at the edge in
positive direction.
DTL (–):Setting of DTL at the edge in
negative direction.
DTL CLIP:Setting of clip level of DTL
edge.
DTL SOURCE:Setting of video source
[G, R, (3G+R) /4, (2G+R+B) /4,
(G+B/2)] to create the detail.
6Master gain, auto iris setting menu
LOW GAIN:LOW setting of master
gain.
MID GAIN:MID setting of master gain.
HIGH GAIN:HIGH setting of master
gain.
• The above GAIN setting is able to set
–6 to +18 dB in 3 dB step.
A.IRIS LVL:Setting of the intended
convergence level of auto iris.
A.IRIS PEAK/AVG:Setting of the
detection ratio of peak value and
average value of the quantity of light
when auto iris is operated.
A.IRIS WINDOW:Setting of the
detecting position of auto iris.
IRIS MODE: Auto iris mode setting:
(LENS/CAM).
IRIS GAIN:Iris loop gain adjustment. 
						

							25

   S GAIN 1

   TOTAL GAIN           :42dB
   ANLG GAIN            :36dB
   PIX MIX              :06dB
   H DTL LVL            :00
   CRISP                :0
   LEVEL DEPENDENT      :5
   PEAK FREQUENCY       :2
   M GAMMA              :0.45
   MASTER PED OFFSET    :-043
   R PED OFFSET         :-046
   B PED OFFSET         :-045

°° °°
°
Setting of Menu Items
7Super gain, Detail, Pedestal-offset
level setting menu
TOTAL GAIN:Total gain in analog,
pixel addition, and memory addition is
displayed.
ANLG GAIN:Gain setting in analog.
PIX MIX:Gain setting in horizontal pixel
addition. Capable of setting 0/6 dB.
H DTL LVL:DTL level setting of super
gain.
CRISP:Setting the function of reducing
noise level of super gain. It is invalid
when DTL level is “0”.
LEVEL DEPENDENT:Setting of DTL
suppression at low lighting intensity of
super gain.
PEAK FREQUENCY:Setting of DTL
boost frequency of super gain.
M GAMMA:Gain setting in super gain.
Capable of setting 0/6 dB.
MASTER PED OFFSET:Setting of
master pedestal offset of super gain 1.
R PED OFFSET:Setting of R pedestal
offset of super gain.
B PED OFFSET:Setting of B pedestal
offset of super gain.
!Maintenance menu
(Super gain 1, 2, 3 are same menu.) 
						

							26
Setting of Menu Items
!Maintenance menu
8Matrix menu
Selection of table A, B or OFF.
Adjustment of gain of each color.
  < MATRIX >

   MATRIX TABLE      :A
   MATRIX R-G        :+00
   MATRIX R-B        :+00
   MATRIX G-R        :+00
   MATRIX G-B        :+00
   MATRIX B-R        :+00
   MATRIX B-G        :+00




 < COLOR CORRECTION1 >
            SAT   PHASE
    R       +00    +00
    Mg      +00    +00
    B       +00    +00
    Cy      +00    +00
    G       +00    +00
    Y1      +00    +00


qZColor correction 2 menu
Adjustment of gain and phase of matrix. 9Color correction 1 menu
Adjustment of gain (saturation) and
phase of each color.

 < COLOR CORRECTION2 >
            SAT   PHASE
   R - Mg   +00    +00
  Mg - B    +00    +00
   B - Cy   +00    +00
  Cy - G    +00    +00
   G - Y1   +00    +00
  Y1 - R    +00    +00

 
						

							27
   SETTING

   1.MODE
   2.SHUTTER
   3.H.PHASE



°° °°

   MODE
 
   BLACK STRETCH        :OFF
   D5600K               :OFF
   CABLE COMPE          :0m
   SUP GAIN             :OFF
   CAM ID               :BAR
   CAM ID POSI          :0
   MATRIX TABLE         :OFF
   COLOR CORRECTION     :OFF
   STATUS               :ON

°° °°
Setting of Menu Items
@Setting menu
-Menu for various settings.
1Camera mode setting menu
BLACK STRETCH:Setting of the
function of expanding low-brightness
analog video level.
It is set by ON/OFF.
D5600K:It is able to make color
temperature correction of about 5600
degrees of electric color temperature
correcting file.
It is set by ON/OFF.
CABLE COMPE:Setting of video cable
compensation. It is able to set
0/25/50m.
SUP GAIN:It sets OFF/1/2/3 of MAX
GAIN.
CAM ID:Setting of camera ID display.
It is set by OFF/BAR/ON.
In BAR setting, CAM ID is displayed
only in BAR mode. 
						

							28
Setting of Menu Items

   SHUTTER

   SHUTTER MODE         :OFF
   SHUTTER SPEED        :1/100
   SYNCHRO SCAN         :75.1


°° °°
   H.PHASE

   H.PHASE-COARSE       :09
   H.PHASE-FINE         :40 

°° °°
@Setting menu
3Horizontal phase adjustment menu
for external reference signal
H.PHASE-COARSE:It is able to set the
horizontal phase in 15µ step.
H.PHASE-FINE:Setting of 1-step fine
adjustment in the above phase
adjustment. 2Electronic shutter setting menu
SHUTTER MODE:It selects the shutter
operation. ON/SYNCHRO/OFF can be
selected.
ON 
Setting of normal discrete shutter
speed.
SYNCHRO 
Setting of synchro scan
mode.
SHUTTER SPEED:Setting of normal
shutter speed.
SYNCHRO SCAN:Setting of synchro
scan mode.
Shutter speeds of 60 Hz to 120 Hz can
be continuously changed.

   MODE
 
   BLACK STRETCH        :OFF
   D5600K               :OFF
   CABLE COMPE          :0m
   SUP GAIN             :OFF
   CAM ID               :BAR
   CAM ID POSI          :0
   MATRIX TABLE         :OFF
   COLOR CORRECTION     :OFF
   STATUS               :ON

°° °°1Camera mode setting menu
(continued from previous page)
CAM ID POSI:It sets the display
position of camera ID.
0: top left, 1: top right, 2: down left, 
3: down right.
MATRIX TABLE:It sets A, B or OFF of
Matrix table.
COLOR CORRECTION:Setting of
matrix ON/OFF.
STATUS:It sets displaying/not
displaying the status when AWB/ABB is
executed. 
						

							29
°°  CAM ID
ID:AKHC900
°°
H FILE MENU

   FILE                 :USER1
   SAVE FILE?           :USER1
   SAVE                 :

°°
H FILE MENU

   FILE                 :USER1
   SAVE FILE?           :USER1
   SAVE                 :

°°
Setting of Menu Items
#Camera ID setting menu
$File managing and renewing menu
-File operation menu
: blinking display.
1The file selected by FILE is loaded.
It can be selected from
[PRESET/USER1 / USER2
/CURRENT]. 
When desired to return to the
previous data after loading other file,
select “CURRENT”. 
						

							30
H FILE MENU

   FILE                 :USER1
   SAVE FILE?           :USER1
   SAVE                 :   

°
  FILE MENU
   
   FILE                 :USER1
   SAVE FILE?           :USER1
   SAVE IN USER1.OK?
   YES
   NO°°
  FILE MENU
   
   FILE                 :USER1
   SAVE FILE?           :USER1
   SAVE IN USER1.OK?
   SAVE COMPLETE°°
Setting of Menu Items
$File managing and renewing menu
-File operation menu 
(continued from previous page)
2When saving the current data, two
files (USER1 /USER2) can be saved. 
Select the file by “SAVE FILE?” 
Select “USER1” and move the cursor
to SAVE and press the MENU key,
then the item menu is displayed.
3SAVE IN USER1. OK? 
“YES” and “NO” are displayed.
Move the cursor from “NO” to “YES”
and check that “YES” blinks.
4When the menu key is pressed,
“SAVE COMPLETE” appears, then
“SAVE” of the file is completed.