Panasonic 1080l Multi Purpose Digital Camera Ak Hc910p Operating Instructions

11
O    I
BREAKER
ZOOM/
FOCUS
SDI OUT1
2
1
/F
G/LIN Pb OUT Pr /SDI
OUTY/VIDEO
OUT
1394CONTROL IN
IP/RPDC12V
IN
CAMERA I/F
LENSE I/F
ND/EXT SDI
IN
CSOP
O    I
HD-SDI
Pan/Tilt Head Controller
AW-RP301Multi-cable (5m)
AK-HDMLTCA05 Coaxial Cable (5C-FB)
AC Adaptor 
AW-PS505
DC 
Power 
Cable
HD Controller 
AK-HRP900HD Monitor Remote 
controllable 
lens
Multi-purpose Digital
Camera AK-HC910P
External sync signal 
(3 value sync)
Remote 
(zoom/focus 
control) cable
Multi-purpose Digital Camera Pan/Tilt Head...

12
O    I
BREAKER
ZOOM/
FOCUS
SDI OUT1
2
1
/F
O    I
HD-SDI 
Multi-cable (5m) 
AK-HDMLTCA05Coaxial Cable (5C-FB)
AC Adaptor 
AW-PS505
DC 
Power
Cable
HD Controller 
AK-HRP900HD Monitor Remote 
controllable 
lensMulti-purpose
Digital Camera
AK-HC910P
AC Adaptor 
AW-PS505DC Power
Cable
Multi-purpose Digital Camera Control System Configuration 2
(System for remotely monitoring picture control)
Multi-cable (5m) 
AK-HDMLTCA05
Relay box 
AK-HTF900
Remote (zoom/focus 
control) cable
Transfer 

13
O    I
BREAKER
ZOOM/
FOCUS
SDI OUT1
2
1
/F
G/LIN Pb OUT Pr /SDI
OUTY/VIDEO
OUT
1394CONTROL IN
IP/RPDC12V
IN
CAMERA I/F
LENSE I/F
ND/EXT SDI
IN
CSOP
O    I
O    I
HD-SDI  Multi-cable (5m) 
AK-HDMLTCA05
Coaxial Cable (5C-FB)
AC Adaptor 
AW-PS505
DC 
Power 
Cable
HD Controller 
AK-HRP900HD Monitor Remote 
controllable 
lens
Multi-purpose Digital
Camera AK-HC910PRemote 
(zoom/focus 
control) cable
Pan/Tilt Head
AW-PH300A
AC Adaptor 
AW-PS300 DC Power 
Cable
AC Adaptor 
AW-PS301
NOTE:
Pan/Tilt Head is...

14
Operation Procedure
1Turn on the power of each
equipment.
2Properly adjust the light for the
object.
3Adjust the flange back of the lens,
the iris and the focus.
• Flange back must be adjusted when
the camera is used for the first time or
after replacement of the lens.
4Adjust the white balance.
• This adjustment is needed when the
camera is used for the first time or
after leaving unused for a long time.
• The adjustment is necessary when
the lighting condition or brightness is
changed.
• After...

15
_Flange back adjustment (for zoom lens)
The adjustment is to adjust the focus in all the range from the maximum zoom to the
widest angle of the zoom lens.
1Shoot a dark object to open the iris.
2Adjust the distance from the object to 6.6 ft. (2 m) at least, then loosen the flange
back fixing knob of the lens.
3Set the lens to the maximum zoom and adjust the focus by turning the focus ring.
4Set the lens to the widest angle and adjust the focus by turning the flange back
adjust ring.
5Repeat adjusting...

16
_Color temperature and while balance adjustment (reference)
When carbon is burnt, it develops
various colors of light depending on the
temperature. Natural light can be
specified by color temperature reflecting
to the color developed when carbon is
burnt.
The light of 3,200K (K=Kelvin, –273°C
equals to absolute zero temperature 0K)
represents the same value (color) as
what develops when carbon is burnt at
3,200K (2,927°C). The relationship
between the color temperature of the
light source and weather...

17
   H.PHASE

   H.PHASE-COARSE       :03
   H.PHASE-FINE         :40 

°° °°
_Black balance adjustment
• Adjust it with the lens closed.
When the motor drive lens is controlled from the camera, adjusting the black balance
causes the lens to be automatically closed.
How to Adjust
_Gen lock adjustment
When multiple cameras are used or the camera is combined with other equipment, it is
necessary to adjust the phase for phase matching by external synchronization.
•Horizontal phase adjustment
Observe...

18
USER MENU

 1.MAINTENANCE
 2.SETTING
 3.CAM ID
 4.FILE MENU

  MAINTENANCE

   1.BLACK SHADING
   2.PED,GAMMA,FLARE
   3.KNEE,WHITE CLIP
   4.R/B GAIN
   5.DTL
   6.GAIN,AUTO IRIS
   7.S.GAIN 1
   8.S.GAIN 2
   9.S.GAIN 3
  10.MATRIX
  11.COLOR CORRECTION1
  12.COLOR CORRECTION2
°°
   SETTING

   1.MODE
   2.SHUTTER
   3.H.PHASE


°° °°
°°  CAM ID
ID:AKHC900°°
H FILE MENU

   FILE                 :USER1
   (DATA REF            :PRESET)
   SAVE FILE?...

19
USER MENU

 1.MAINTENANCE
 2.SETTING
 3.CAM ID
 4.FILE MENU


Setting of Menu Items
_USER menu (Initial screen)
The readout data at start of power supply
is the data just before cutting off the power
supply, and the operation is started with
the data.
1. MAINTENANCE
It sets various adjusting data.
2. SETTING
It sets various modes.
3. CAM ID
It sets the camera ID.
4. FILE MENU
It executes file loading and saving, and
makes the basic setting of data display.
Menu operation is executed by the HD...

20
  MAINTENANCE

   1.BLACK SHADING
   2.PED,GAMMA,FLARE
   3.KNEE,WHITE CLIP
   4.R/B GAIN
   5.DTL
   6.GAIN,AUTO IRIS
   7.S.GAIN 1
   8.S.GAIN 2
   9.S.GAIN 3
  10.MATRIX
  11.COLOR CORRECTION1
  12.COLOR CORRECTION2

°°
 °BLACK SHADING°  
   DETECTION
   CORRECT(DIG)         :ON
   CORRECT(ANA)         :ON
Setting of Menu Items
!Maintenance menu
• Move the cursor (arrow mark) to the item
to be adjusted and press the MENU key,
then it enters the adjustment menu
thereunder.
• Move...