Palmone IIIx Handheld Handbook

							Chapter 7 Page 163
Connecting to your service
After you set your Modem and Network Preferences, establishing a 
connection to your Internet Service Provider (ISP) or your company’s 
network (dial-in server) is easy.
Note:If you are connecting to an ISP, you need a third-party 
application, such as a web browser or news reader, to take 
advantage of this connection. For information about third-
party applications that support TCP/IP, check the web site 
http://www.palm.com.
To establish a connection:
nTap Connect to dial the current service and display the Service 
Connection Progress messages. 
Tip:To see expanded Service Connection Progress messages, 
press the lower half of the Scroll button.
To close a connection:
nTap Disconnect to terminate the connection between your 
organizer and your service.
Creating additional service templates
You can create additional service templates from scratch or by 
duplicating existing templates and editing information. After you 
create a new or duplicate template, you can add and edit settings.
To add a new service template:
1. Tap the Menu icon  . 
2. Tap Service, and then tap New.
A new service template (called Untitled) is added to the Service 
pick list.
To duplicate an existing service template:
1. Tap the Service pick list.
2. Tap the predefined service template you want to duplicate.
3. Tap the Menu icon  . 
4. Tap Service, and then tap Duplicate.
A copy of the service template is added to the Service pick list. 
						

							Page 164  Setting Preferences for Your Organizer
Adding detailed information to a service template
If you are using one of the predefined service templates, you probably 
only need to enter your user name and telephone number. If you are 
creating a new service template, you may need to provide additional 
information to your ISP or dial-in server. You use the Details dialog 
box to add additional information to a selected service template.
To select a connection type:
1. Tap the service field.
2. Tap Details.
3. Tap the Connection type pick list and select one of the following 
connection types:
Note:If you are not sure, try PPP; if that doesn’t work, ask your 
Internet Service Provider or your System Administrator for 
the correct connection type.
Idle timeout
The Idle timeout setting defines how long your organizer waits before 
dropping the connection with your ISP or dial-in server when you 
switch out of a TCP/IP application.
To set the Idle timeout:
1. Tap the Idle timeout pick list and select one of the following 
options:PPP
Point-to-Point protocol
SLIP
Serial Line Internet Protocol
CSLIP
Compressed Serial Line Internet Protocol
Select connection type 
						

							Chapter 7 Page 165
2. Tap OK.
Defining primary and secondary DNS
The Domain Naming System (DNS) is a mechanism in the Internet for 
translating the names of host computers into IP addresses. When you 
enter a DNS number (or IP address), you are identifying a specific 
server that handles the translation services.
Each IP address has four sections, separated by periods. In the Details 
dialog box, you enter each section separately. Each section of an IP 
address is made up of a number from 0 to 255; numbers are the only 
allowable characters in this field.
Ask your Internet Service Provider or System Administrator for the 
correct Primary or Secondary DNS IP numbers.
Tip:Many systems do not require that you enter a DNS. If you are 
not sure, leave the DNS field blank.
To enter a primary and secondary DNS:
1. Tap the Query DNS check box to deselect it.
2. Tap the space to the left of the first period in the Primary DNS field, 
and then enter the first section of the IP address. 
Note:Each section must be a number from 0 to 255.
3. Repeat step 2 for the second, third, and last sections of the Primary 
DNS field.
4. Repeat steps 2 and 3 for the Secondary DNS number.
5. Tap OK.Immediate
Drops the connection to your ISP immediately 
when you switch to another application. 
1 minute
Waits one minute for you to open another 
application before it drops the connection. 
2 minutes
Waits two minutes. 
3 minutes
Waits three minutes. 
Power Off
Keeps your PPP or SLIP connection until you 
turn off your organizer (or until it times out). 
This option works best with the Palm Modem 
accessory. 
						

							Page 166  Setting Preferences for Your Organizer
IP address
Everyone who logs on to the Internet needs to have a unique identifier 
(an IP address), whether permanent or temporary. Some networks 
dynamically assign a temporary IP address when clients log in. The IP 
Address field lets you identify whether your network provides 
automatic (dynamic) temporary IP addressing.
Note:If your IP address is permanently assigned, you need to get 
that information from your System Administrator. If you are 
not sure, select Automatic.
To identify dynamic IP addressing:
nTap the IP Address check box to select it.
To enter a permanent IP address:
1. Tap the IP Address check box to deselect it and display a 
permanent IP address field below the check box.
2. Tap the space to the left of the first period then enter the first 
section of the IP address. 
Note:Each section must be a number from 0 to 255.
3. Tap and enter the remaining sections of the IP address.
4. Tap OK.
Tap to select automatic 
IP address 
						

							Chapter 7 Page 167
Creating a login script
A login script is a series of commands, similar to an autoexec.bat file, 
that automates logging into your ISP. You can create login script files 
by selecting commands from the Command pick list in the Login 
Script dialog. Some commands from the Command pick list, such as 
Send, require you to supply additional information. Those commands 
have a parameter field so that you can add the necessary data.
Note:You can also use non-ASCII and literal characters in your 
login script. See Appendix D for more information.
To create a login script:
1. Tap Script.
2. Tap the End pick list.
3. Tap the command you want from the Command list. If the 
command requires additional information, a field appears to the 
right of it for you to enter the information. The following 
commands are available:
Wait For
Tells your organizer to wait for specific 
characters from the TCP/IP server before 
executing the next command.
Send
Transmits specific characters to the TCP/
IP server to which you are connecting.
Send CR
Transmits a carriage return or LF character 
to the TCP/IP server to which you are 
connecting.
Tap here 
						

							Page 168  Setting Preferences for Your Organizer
4. Repeat steps 2 and 3 until the login script is complete.
5. Tap OK.
Deleting a service template
There is only one way to delete a service template: use the Delete 
command from the Service menu.
To delete a service template:
1. Tap the Service pick list.
2. Tap the service template you want to delete.
3. Tap the Menu icon  . 
4. Tap Service, and then tap Delete.
5. Tap OK.Send User ID
Transmits the User ID information entered 
in the User ID field of the Network 
Preferences screen.
Send 
PasswordTransmits the password entered in the 
Password field of the Network Preferences 
screen. If you did not enter a password, 
this command prompts you to enter one. 
The Password command is usually 
followed by a Send CR command.
Delay
Tells your organizer to wait a specific 
number of seconds before executing the 
next command in the login script.
Get IP
Reads an IP address and uses it as the IP 
address for your organizer. This command 
is used with SLIP connections.
Prompt
Opens a dialog box and prompts you to 
enter text of some kind (for example, a 
password or a security code).
End
Identifies the last line in the login script. 
						

							Chapter 7 Page 169
Network preferences menu commands
The Network Preferences screen includes menu commands to make it 
fast and easy to create and edit service templates. TCP/IP application 
menus are show here for your reference.
See “Using menus” in Chapter 1 for more information about choosing 
menu commands.
Service menu
Options menu
TCP/IP troubleshooting
If you are having a problem establishing a network connection using 
TCP/IP, check this section and try the suggestions listed.
Displaying expanded Service Connection Progress messages
It’s helpful to identify at what point in the login procedure the 
connection fails. An easy way to do this is to display the expanded 
Service Connection Progress messages. Expanded Service Connection 
Progress messages describe the current stage of the login procedure. 
Press the lower half of the scroll button at any point during login to 
display these messages.
Viewing the Network Log
If viewing the expanded Service Connection Progress messages does 
not give you enough information to find out why you cannot connect 
to your ISP or dial-in server, take a look at the Network Log. The 
Network Log lists all of the communication that occurs between your 
modem and your dial-in server during the login procedure. The 
information in the Network Log can help your ISP or your System 
Administrator pinpoint where the login procedure communication 
fails and why. 
						

							Page 170  Setting Preferences for Your Organizer
To view the Network Log:
1. Tap Options, and then tap View Log.
2. Tap the up and down arrows of the scroll bar to see the entire 
Network Log.
3. Tap Done.
Adding a DNS number
If your ISP or dial-in server requires a DNS number and you did not 
enter that information in the Network Preferences screen, it will 
appear that you successfully logged into your network. When you try 
to use an application or look up information, however, the connection 
fails. If this occurs, try adding a DNS number. Ask your ISP or your 
System Administrator for the correct Primary and Secondary DNS IP 
numbers. 
						

							Chapter 7 Page 171
Owner preferences
The Owner Preferences screen enables you to record a name, company 
name, phone number, or any other information that you want to 
associate with your organizer.
If you use the Security application to turn off and lock your organizer 
with a password, information that you put in the Owner Preferences 
displays the next time you turn on your organizer. See Chapter 1 for 
more information.
To enter the Owner preferences:
nEnter the text that you want to associate with your organizer in the 
Owner Preferences screen. If you enter more text than can fit on 
one screen, a scroll bar automatically appears on the right side of 
the screen.
If you assign a password with the Security application, the 
information in the Owner Preferences screen cannot be changed. In 
this case, an Unlock button appears at the bottom of the screen. 
To unlock the Owner Preferences screen:
1. Tap Unlock.
2. Enter the password that you defined in the Security application.
3. Tap OK. 
						

							Page 172  Setting Preferences for Your Organizer
ShortCuts preferences
The ShortCuts Preferences screen enables you to define abbreviations 
for entering text with Graffiti strokes. This section describes how to 
create, edit, and delete a ShortCut. See Chapter 2 for more information 
on the use of ShortCuts. 
Creating a ShortCut
You can create a ShortCut for any words, letters, or numbers. All 
ShortCuts you create appear on the list in the ShortCut Preferences 
screen. All the ShortCuts are available in any of your organizer 
applications and are backed up on your computer when you perform 
a HotSync operation.
To create a ShortCut:
1. Tap New.
2. On the ShortCut name line, enter the letters you want to use to 
activate the ShortCut.
3. Tap the ShortCut Text area and enter the text that you want to 
appear when you write the ShortCut characters.
Tip:You may want to add a space (space character) after the 
last word in your ShortCut text. This way, a space 
automatically follows the ShortCut text.
4. Tap OK.
Tip:To use a ShortCut, draw the ShortCut stroke followed by the 
ShortCut characters. When you draw the ShortCut stroke, the 
ShortCut symbol appears at the insertion point to show that 
you are in ShortCut mode.
Tap New