Orion Pdp Opm 4250 Users Manual

							• 2009.12.21
Thank you for purchasing our MPDP.
Please read through this user's manual for safety before installing this\
 product.
This product is manufactured for Multi Plasma display model only.
User’s Manual
OPM-4250 | OPM-4250R
Infinitely ExpandableMPDP
A revolutionary MPDP
A revolutionary MPDP
Infinitely Expandable MPDP
Address: 257-6, Gongdan-dong, Gumi-si, Gyeongsangbuk-do, Korea
Tel : +82-2-6678-8533,      Fax: +82-2-6678-8599
ORION PDP CO.,LTD.
www.oriondisplay.net
  
						

							- 1 -
Infinitely Expandable Features of MPDP
▶  
Enjoy a wide flat screen with high brightness and high quality.
▶Easy to install and move due to its thin design
▶Enjoy your favorite programs with various split-screen features simultan\
eously presenting 
several programs.
To prevent electric shock, Do not remove cover.
No user serviceable part inside
Refer servicing to qualified service personal.
Warning
Thank you for purchasing our MPDP monitor.
This manual describes how to use the product and notes in use.
Please read the manual carefully  before using it.
After reading this manual, please retain for future reference. 
If you have any questions or a problem occurs, please contact either the\
 company you purchased this 
product from or an authorized service center. 
※Displaying static picture for an extended period of time may cause an bu\
rn-in effect.
If you fail to comply with the regulations for safety and proper use, 
fire or injury may be caused. Warning
User'sManualMulti-ScreenControlSystem(MSCS)GuidePin(4pcs)Handle(2pcs)
RS-232CCableBolt(4pcs)DVI-DCablePowerCable
Supplied Accessories
Notice to usersClass A digital device
It is a device designed for business purpose with a safety certificate f\
or electromagnetic interference, which 
user should be mindful of.
" Important Safety Instructions" 
 
  1) Read these instructions.
  2) Keep these instructions.
  3) Heed all warnings.
  4) Follow all instructions.
  5) Do not use this apparatus near water.
  6) Clean only with dry cloth.
  7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  8)  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus 
(including amplifiers) that produce heat.
  9)  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has 
two blades with one wider than the other. A grounding type plug has two blades and a third 
grounding prong. The wide blade or the third prong are provided for your safety. If the provided 
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10)  Protect the power cord from being walked on or pinched particularly at plugs, convenience 
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12)  Use only with the cart, stand, tripod, bracket, or table specified by \
the 
manufacturer, or sold with the apparatus. When a cart is used, use 
caution when moving the cart/apparatus combination to avoid injury 
from tip-over.
13) Unplug this apparatus during lightning storms or when unused for lo\
ng periods of time.
14)  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has 
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been 
spilled or objects have fallen into the apparatus, the apparatus has bee\
n exposed to rain or 
moisture, does not operate normally, or has been dropped. 
The symbol in figure 21 shall be shown adjacent to the text of item 12 above.
PDP
REMOTE CONTRO L
ONOFF123
4 56
7 8
09
MPDP
Optional Accessories
MAIN FRAME(refer to page 14~15)RS-232C Distributor Necessaryforconnectingmorethan30units.
DVI ConverterNew MFC SET
1Input,6Output
 
						

							- 2 -
OPM-4250 | OPM-4250R
- 3 -
Infinitely Expandable 
Contents
※Cautions for consisting MPDP System ...................................................................................4
※ Please keep following instruction for panel protection without exception. ............6
1. Safety Precautions................................................................................................................. ..............10
2. How to Install................................................................................................................. ..........................12
3. Guidance for Users................................................................................................................. ............16
4. How to Connect Cables................................................................................................................ ..18
4.1.ConnectionofonesetMPDP.................................................................................................................18
PC&DVIConnection ................................................................................................................ ............18
4.2.ConnectionofMulti-screenMPDP........................................................................................................20
4.3.ConnectionofRS-232CCable..............................................................................................................22
4.4.Connectionof3x3MPDP................................................................................................................. ....23
4.5.DVIConnection................................................................................................................. .......................24
4.6.IDsettingofXxYMPDP................................................................................................................ ........25
5. Setting and operation of MSCS software............................................................................26
5.1.MSCSInstallation ................................................................................................................ .....................26
5.2.StartMSCS............................................................................................................... ................................27
5.3.Setting'ComPort'............................................................................................................... .....................28
5.4.PortSetting................................................................................................................. ..............................29
5.5."Newdesign/Lastdesign"setting..........................................................................................................30
5.6.Multi-screenconfiguration................................................................................................................ ......31
5.7.MSCSInstruction................................................................................................................ ......................32
5.8.IDSetting................................................................................................................ ..................................32
5.10.SlideControl................................................................................................................. ..........................36
5.11.ScreenControl................................................................................................................. ......................39
5.12.BICControl................................................................................................................ ............................40
BICstatusIndicator................................................................................................................. ...............42
Burn-In-CompensationControlMethod.............................................................................................43
BICIntervalsandeffect................................................................................................................ .........43
HowtoControlBIC................................................................................................................. .............44
5.13.NewMFCconfigurationmethod.......................................................................................................46
5.14.DVIConverter................................................................................................................ ....................49
5.15.OrionPDPHomePagelogonandVersioninformation...................................................................57
6. MSCS Protocol................................................................................................................ ........................58
※Attachment:ASCIItoHEXConversionTable................................................................................77
7. Other tips............................................................................................................... ....................................78
7.1.Beforecallingforservice................................................................................................................. .......78
7.2.AboutPlasmadisplaypanel................................................................................................................. ..79
8. Applicable DVI signals............................................................................................................... ......80
9. Specification................................................................................................................ ............................81
10. Option Specification................................................................................................................ ........83
10.1.DVIConverter............................................................................................................... .........................83
10.2.NewMFC................................................................................................................. ...............................84
 
NOTICE
1.  To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, 
therefore the mains plug shall be readily operable 
2.  WARNING - To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Appliance To 
Rain Or Moisture.
3.  Apparatus shall not be exposed to dripping or splashing and no objects fi\
lled with liquids, such 
as vases, shall be placed on the apparatus.
4. Use only a properly grounded plug and receptacle
5.  "Warning" CAUTION – These servicing instructions are for use by qualified service personnel only. 
To reduce the risk of electric shock, do not perform any servicing other tha\
n that contained in the 
operating instructions unless you are qualified to do so.
6.  "Warning" CAUTION – These servicing instructions are for use by qualified service personnel only. 
To reduce the risk of electric shock, do not perform any servicing other tha\
n that contained in the 
operating instructions unless you are qualified to do so.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence of uninsulated "dangerous 
voltage" within the product's enclosure that may be of sufficient magnitude to 
constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and 
maintenance(servicing) instructions in the literature accompanying the appliance.
 
						

							Environmental condition for installation
-SinceMPDPpanelisverysensitiveforphysicalimpact,installationrequires
considerablecaution.
-Minimumclearance(20cm)mustbesecuredforsmoothventilation.(SeeP14~15)
Installationmustavoidairtightornearairtightplaces.Improperventilationcauses
malfunctionandshortensproductlifetimebyrapidinternaltemperaturerise.If
MPDPhastoinstalledattheimproperventilation,additionalventilationopenings
orfansmustbeprovidedtokeeptheinternaltemperaturebetween0~35℃.
-ForgroundofMPDPandapplicationdevices,itshouldbeconnectedasframe
ground.
-ConsideringMPDPMaxpowerconsumption,checkthemainelectric
specification.
Consideration for easier service
-WhenyoudesigntheexteriordesignforMPDPsystem,considereasier
disassemblyforpossibleserviceoccasioninthefuture.
-TheslidingUniversalUnitofORIONPDPisrecommendedforeasierservice.
-IfservicepeoplecanstepintothebacksideofMPDPsystem,itcangreatly
reducetimeandeffortforservice.
-Incaseofhigherlocations,considertheinstallationlocationandexteriordesign
foreasierservice.
※Cautions for consisting MPDP System 
The number of Daisy chain connection 
-Theimagequalitycanbevarydependonthequalityofsignalandcable
condition.
INPUT SOURCEResolutionConnectionRemark
DVI1600x1200x60HZ6setsHDCPAvailable
RS-232C30setsORIONCableOnly
-IfyouneedtousemoreMPDPsetsthanindicatedinthetable,usingaDVI
distributorishighlyrecommended.
Cautions for using Wall controller and Application devices
-IfyouuseMVP,Crestron,Extron,AMX,orJupitordevicesinsteadofMSCS,MPDP
ControlProgram,toconsistmultiscreen,APLfunctionmustbeturnedoffto
preventpossiblebrightnessdifferencebetweensets.
Caution for the other control program besides MPDP 
Control Program (MSCS)
-Ifyouwanttouseautomaticpoweron/offfunctionthatmakeMPDPturnedon/
offbyconnectingmainpower,allowatleast20secondsofStand-bytimebefore
MPDPisturnedon,whenyoumakecontrolprogram.
-BICfunctionrequirestwo-waycommunication.IfyoudonotuseMSCS,therewill
bewhitebalancedifferencebyglobaldataastimeelapses.Toavoidsucherror,
NewMFCmustbeused.
-IfRS-232Ccommunicationsignalorotherimagesignalisappliedto9ormore
setssimultaneously,communicationalerrormayoccur.(Poweron&Broadcast)

- 4 -
OPM-4250 | OPM-4250R
WArning
- 5 -
Infinitely Expandable 
WArning
 
						

							- 6 -
OPM-4250 | OPM-4250R
WArning
- 7 -
Infinitely Expandable 
WArning
PANELPANELPANELPANEL
CUSHION
PANEL
WarningWarning
※Handle with Caution.
     -  Shock/Impact on the set's sides will result in 
internal circuit damages.
     - The edge/bottom of the panel are fragile.  
Use shock-absorbing pads or rugs for laying 
down the product.
Please do not stand PDP •	
alone. It may fall or slip 
off and Panel can be 
broken or damaged.
IfyouneedtostandPDP,•	
youmustusehandleson
thebackandleanover
thePDPtoavoidpanel
touchesgroundorfloor.
Please do not lean over •	
the PDP. It may damage 
the bottom part of the 
PDP.
If you need to lay down •	
PDP as face down 
position, please use 
shock-absorbing pads 
under the PDP. 
Please do not lean over the •	
PDP toward the edge part. 
It may damage the edge 
part of the PDP.
If you need to lay down •	
PDP as face up position, 
please be cautious for 
falling objects on the 
surface of the PDP. 
※ Please keep following 
instruction for panel protection 
without exception.
  -   This product can be damaged even with minor 
impact for its nature. 
Please keep following instruction to carry or 
store the products.
 
						

							- 8 -
OPM-4250 | OPM-4250R
WArning
- 9 -
Infinitely Expandable 
WArning
Open Structure
Unlike consumer PDP product, the panel of MPDP is exposed without 
any protective chassis. 
It needs extra caution to carry or install to prevent any impact.  
How to carry MPDP
It always needs two persons to carry or install MPDP.
When you carry MPDP with up straight manner, please hold handles on the back 
and bottom part of the panel together.  
Please be careful not to touch the bottom part of the panel when you put down the 
panel.
When you carry MPDP with flatbed manner, please hold handles on the back and 
lower part of the back.
Please be careful not to touch the bottom part of the panel when you put down the 
panel.
Pleasedonottouchthepanelwithyourhand.
Please see page 12 for unpack and handle assembly.
PANEL
MASTER FRAME
OPM-4250•	OPM-4250R•	
Ithas to be handled with
care, because the panel
glass substrate is exposed
withoutsidecover.
Although Panel is protected
with a Side cover, it is still
sensitive to the impact or
shockfromoutside. 
     
						

							- 10 -
OPM-4250 | OPM-4250R
- 11 -
Infinitely Expandable 
Safety Precautions1. 
 
If it operates abnormally, stop using it •	
immediately.
 
Please refer to a specialized •	
construction company for installing stand 
or wall mount unit.  Otherwise, damage 
or injury may be caused.
Avoid any action to damage the power •	
cord or power plug.  It may cause fire or 
electric shock.
Do not alter (or disassemble) the •	
product.  It may cause electric shock 
since high voltage is flowing inside.
 
Do not place any liquid-containing •	
container on it.  If the inside is wet, it 
may cause electric shock or fire.
Do not touch the device when lightning •	
strikes.
Do not pull out the power plug with a wet •	
hand.  It may cause electric shock.
Do not install the product where it may •	
be exposed to direct sunlight or near 
any heating device. It may shorten the 
product's life span or cause failure.
 
Do not put any foreign material into •	
the product.  It may cause a failure or 
shorten the life span.
  
Do not install in an unstable location •	
It may cause injury.
Do not exceed ratings of AC outlet •	
or extension cords. It may cause failure.
 
Make sure the product is not covered •	
with any object.  If the ventilation hole is 
blocked, the inside temperature may rise 
to cause overheating resulting in fire.
Do not poke the front screen with sharp •	
material. It may damage the screen and 
may cause malfunction of the product.
Do not lean against the product or keep •	
it leaned.  It may cause injury or failure.
 
Do not put it at any place with much •	
humidity, dust, oil, smoke or steam.  It 
may cause failure.
If you do not want to use the product •	
for a long time, keep the power plug 
unplugged to save electricity.
The socket-outlet should be installed •	
near the equipment and be easily 
accessible.
Do not put any heavy object on it. •	
It may cause failure.
Do not pull out or hang down the •	
connection cable.  It may damage the 
cord to cause fire or electric shock.
 
Pull out the power plug by holding the •	
plug.  Otherwise, it may damage the 
power cord to cause fire or electric 
shock.
Do not ride or step on the product It may •	
cause breakage when fallen down.
When moving it, disconnect the •	
connecting cable.  Otherwise, it may 
damage the cable to cause fire or 
electric shock.
Install the product on safe and flat •	
surface.
Do not put candles on the product. If the •	
liquid flows inside the product.  It may 
cause electric shock or fire.
Do not touch product’s front surface with •	
hand.  Otherwise, the image quality can 
be lowered. 
 
						

							- 12 -
OPM-4250 | OPM-4250R
- 13 -
Infinitely Expandable 
How to install2. 
Panel
Masterframe
MPDP
How to assemble handles
Installthissetonlyatalocationwhereadequateventilationisavailable.y
1. Product is packed in a box as shown in Figure 1.  
2. Please carefully remove the Packing Bag with a knife or a pair of scissors.  
※Pleasecheckfrontandrearsidebeforeyoucutthebagtopreventanydamages
onpanelorset.
3.  Please assemble handles with the bolts that are in the accessory box to the 
rear side as shown in the figure.
Handles
PackingBag
[Figure1]
[Figure3]
[Figure2]
[Figure4]
Panelprotection
How to move MPDP
1. 2 people hold each handle on product's back side.
2.  It needs two people to carry or install this product. 
Pleaseholdthehandlesinthebackandthefrontbottompartatthesametime.
-Pleasedonotgrabthepanel,butgrabbottomofmasterframewhenyoucarryorinstalltheproducts.
-Pleaseusegloveswhenyoucarryorinstalltheproducts.
※Attention :
-  Do not remove the panel protection pad until a set is completely installed on a stand or a wall hanger.  
Please carefully remove Panel protection pad to prevent any damages on the product .
-Pleasemakesuretousepanelprotectionwhenyoumove,carryorrentMPDP.
Handles
Panelprotection
Panelprotection
         
						

							- 14 -
OPM-4250 | OPM-4250R
- 15 -
Infinitely Expandable 
install on a MAin FrAME Stand
Pleasesecure minimum clearance asshown inthe picture foradequate ventilation andtechnical service.
MAin FrAME Stand Unit (Option)
Thesetcanbeinstalledasshownbelow. y
(Forfurtherinformation,refertotheoptional'MAINFRAMEInstallationandSetupGuide'.)
MAin FrAME Wall Mounting Unit (Option)
Thesetcanbeinstalledonthewallasshownbelow. y
(Forfurtherinformation,refertotheoptional'MAINFRAMEInstallationandSetupGuide'.)
Mount on the MAin FrAME wall
Pleasesecure minimum clearance asshown inthe picture foradequate ventilation andtechnical service.
Pleasedo not install our product at following locations to protect the product andy
preventpossiblemalfunction.
-Placesofvibrationorshock:PDPsetmayfallanddamaged
-NextorneartoSprinklersensors:Thesensorsmaydetectheatfromasetandsprinklercanbeactivated.
-Aroundhighvoltagepowerlines:Noisefromthepowerlinemayaffectscreenimages
-Aroundheatingapparatus:PDPsetmaybeoverheatedanddamaged.
Pleasechecktheystabilityofwall. 
Ifthewallisnotstrongenough,reinforcethewallbeforeinstallation.
Pleaseconnectallthecablestoproperportsinasetbeforeinstallation.y
Hanger
HangerBolt
PDP
MAINFRAME
GuidePin
GuidePin
Hanger
HangerBolt
PDP
MAINFRAME
WALLBRACKET
20cm
20cm20cm
20cm
20cm
20cm
20cm20cm
  
						

							- 16 -
OPM-4250 | OPM-4250R
- 17 -
Infinitely Expandable 
guidance for Users3. 
input/Output Terminals
%08/61ID SELECT
RS-232CINPUTOUTPUTDVI-D_2
DVI-D_1
OUTPUT
INPUT
OUTPUT
INPUT• Model Name : OPM-4250
• Voltage : AC~100 - 240V
• Current : Max. 4A
• Frequency : 50/60Hz
• Serial No : 
PDPCO., LTD. Made in Korea 
To prevent electric shock, 
Do not remove cover.
No user serviceable part inside Refer 
servicing to qualified service personal.FCC Verified : Class A
CAUTION
ID SELECTM-STBM-ON F A N
S-ON
RS-232C
INPUTOUTPUT
DVI-D_2
DVI-D_1
OUTPUT
INPUT
OUTPUT
INPUT
❶
❷
❸
❹
❺ 
1.RS-232C
MPDPControl,Firmware
Upgrade,9pinD-sub
2.DVI 1
TMDSSignal
3.DVI 2
TMDSSignal
4.ID Switch
SetIDSwitch
5.AC Input
AC100V~240V,50/60Hz
%08/ 61ID SELECT
RS-232CINPUTOUTPUTDVI-D_2
DVI-D_1
OUTPUT
INPUT
OUTPUT
INPUT• Model Name : OPM-4250
• Voltage : AC~100 - 240V
• Current : Max. 4A
• Frequency : 50/60Hz
• Serial No : 
PDPCO., LTD. Made in Korea 
To prevent electric shock, 
Do not remove cover.
No user serviceable part inside Refer 
servicing to qualified service personal.FCC Verified : Class A
CAUTION
Set iD Switch Setting
ExampleofIDSwitchsettingy
-YoucansetIDwith3rotaryswitchesasshowninthefollowingfigure.
LED indication y
※   When you set iD of MPDP set, power cable must be disconnected. if power cable is not disconnected 
during  iD setting, MPDP set may be operated with the previous  iD and it may cause abnormal behavior. 
※   For stable operation, wait for at least 10 seconds prior to use MPDP control program after the first AC 
power connection.
LED IndicationDescription
012345678901234567890123456789M-STB 
M-ON FA N
S-ONNo Power. 
012345678901234567890123456789M-STB 
M-ON FA N
S-ONInternal System Check after Power on.
012345678901234567890123456789M-STB 
M-ON FA N
S-ONSystem ready. 
012345678901234567890123456789M-STB 
M-ON FA N
S-ONPower ON by MSCS Program.
(M-ON and S-ON LEDs blink every other 
second. Power on status)
012345678901234567890123456789M-STB 
M-ON FA N
S-ONPower Off by MSCS Program.
(System ready).
M-ON(Master-ON) : IP Board Master Power On.
FAN : FAN POWER ON, IF Red LED on IP board is turned on, please check FANs.
※	To protect the product, power can be disconnected automatically when the \
fan is stopped.
M-STB(Master- Stand By) : IP Board Master Ready
S-ON(Slave-ON) : IP Board Slave Ready 
ON      OFF     
[PDP ID 01]
012345678901234567890123456789
[PDP ID 15]
0123456789
100digit10digitsingledigit
100digit10digitsingledigit