Orion Pdp Mis 4230 Users Manual

							18
MIS-4220 / MIS-4220R / MIS-4230
19
Infinitely Expandable 
01234567890123456789
RS-232CVIDEO
INOUT
IN
OUT
S-VIDEO
IN OUT
COMPONENT 
INOUT
Y
Pb
Pr
DVI-DPC
IN IN
OUT
OUT
ID SELECT
M-ON
M-STB S-ON FA N
VCr Connection
PC(MSCS) to control MPDP
VCR
RS-232C (Maximum 15m)
S-Video connection (Maximum 5m)
Video connection (Maximum 5m)
[PDP ID 1]
 
ID switch must be set as ID 1  y
for one set use.
01234567890123456789
               
						

							20
MIS-4220 / MIS-4220R / MIS-4230
21
Infinitely Expandable 
01234567890123456789
RS-232CVIDEO
INOUT
IN
OUT
S-VIDEO
IN OUT
COMPONENT 
INOUT
Y
Pb
Pr
DVI-DPC
IN IN
OUT
OUT
ID SELECT
M-ON
M-STB S-ON FA N
DVD Player & DTV Set top box connection
In case input source is DVD, select DVD/SD in MSCS main screen. y
In case input source is DTV, select HD in MSCS main screen. y
PC(MSCS) to control MPDP
DVD Player & DTV Set top box
RS-232C (Maximum 15m)
Component connection (Maximum 5m)
[PDP ID 1]
 
ID switch must be set as ID 1  y
for one set use.
01234567890123456789
•  According to manufacturers, the indication of DVD Component output port may vary; “Y, PB, PR”, “Y, B-Y, R-Y” or “Y, CB, CR.”
•  Component Input ports You can get better image quality by connecting DVD player to component input ports as below.
Component ports of the set  Y  Pb   Pr
Video output portsof DVD player
 Y  Pb  Pr Y  B-Y  R-Y  Y  Cb  Cr
•  Caution for Component connection In case component cables are not properly connected, you may have bluish or redish screen or even no screen images.Caution
               
						

							22
MIS-4220 / MIS-4220R / MIS-4230
23
Infinitely Expandable 
4.2. Connection of Multi-screen MPDP
Recommended maximum set connection for Multi setting is shown in table below.   y
If you need to connect more than described in the table, you have to use distributors.
Image quality can be affected by cable or signal quality.   y
INPUTSOURCEResolutionConnectionRemark
DVI1600 x 1200 x 60HZ5 sets
PC8.2. PC & DVI Resolution Reference1 sets54 page
DT V720p, 1080i4 sets
DVD480i, 480p, 576i, 576p6 sets
VIDEO/S-VIDEONTST, PAL, SECAM6 sets
01234567890123456789
RS-232CVIDEO
INOUT
IN
OUTS-VIDEO
IN OUTCOMPONENT 
INOUTY
Pb
Pr
DVI-DPC
IN IN
OUT
OUT
ID SELECTM-ON
M-STB S-ON FA N01234567890123456789
RS-232CVIDEO
INOUT
IN
OUTS-VIDEO
IN OUTCOMPONENT 
INOUTY
Pb
Pr
DVI-DPC
IN IN
OUT
OUT
ID SELECTM-ON
M-STB S-ON FA N01234567890123456789
RS-232CVIDEO
INOUT
IN
OUTS-VIDEO
IN OUTCOMPONENT 
INOUTY
Pb
Pr
DVI-DPC
IN IN
OUT
OUT
ID SELECTM-ON
M-STB S-ON FA N01234567890123456789
RS-232CVIDEO
INOUT
IN
OUTS-VIDEO
IN OUTCOMPONENT 
INOUTY
Pb
Pr
DVI-DPC
IN IN
OUT
OUT
ID SELECTM-ON
M-STB S-ON FA N01234567890123456789
RS-232CVIDEO
INOUT
IN
OUTS-VIDEO
IN OUTCOMPONENT 
INOUTY
Pb
Pr
DVI-DPC
IN IN
OUT
OUT
ID SELECTM-ON
M-STB S-ON FA N
RS-232C
S-VIDEO
DVI
PDP1PDP2PDP3PDP4PDP5
PC (MSCS) to control
MPDP
               
						

							24
MIS-4220 / MIS-4220R / MIS-4230
25
Infinitely Expandable 
4.4. Connection of 3 x 3 MPDP4.3. Connection of rS-232C Cable
Maximum use of RS-232 with Daisy Chain connection is  y10 or less. 
If you need additional connection, use RS-232 distributor.
ID 1
ID 6
ID 11
ID 2
ID 7
ID 12
ID 3
ID 8
ID 13
ID 4
ID 9
ID 14
ID 5
ID 10
ID 15
ID 16
ID 21
ID 17
ID 22
ID 18
ID 23
ID 19
ID 24
ID 20
ID 25
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232C Distributor
RS-232C control PC
ID 1
ID 4
ID 7
ID 2
ID 5
ID 8
ID 3
ID 6
ID 9
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUTDVI-D
OUT
IN
DVI-D
OUTIN
DVI-D
OUTIN
DVI-D
OUTIN
DVI-D
OUTIN
DVI-D
OUTIN
DVI-D
OUTIN
DVI-D
OUTIN
DVI-D
OUTIN
RS-232C control PCDVI
DVI Signal Distributor
(UXGA : UP TO 250MHz)
               
						

							26
MIS-4220 / MIS-4220R / MIS-4230
27
Infinitely Expandable 
 4.5. iD setting of X x Y MPDP
Identity number (ID) indicates the location of each MPDP. y
When you look at the MPDP screens in front of MPDP. y
Recommended ID of X x Y screens
ID 1ID 2ID 3ID 4ID 5
ID 6 ID 7ID 8ID 9ID 10
ID 11 ID 12ID 13ID 14ID 15
ID 16 ID 17ID 18ID 19ID 20
ID 21 ID 22ID 23ID 24ID 25
0123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789
0123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789
0123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789
0123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789
0123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789
PDP ID
1
PDP ID
2
PDP ID
3
PDP ID
4
PDP ID
5
PDP ID
6
PDP ID
7
PDP ID
8
PDP ID
9
PDP ID
10
PDP ID
11
PDP ID
12
PDP ID
13
PDP ID
14
PDP ID
15
PDP ID
16
PDP ID
17
PDP ID
18
PDP ID
19
PDP ID
20
PDP ID
21
PDP ID
22
PDP ID
23
PDP ID
24
PDP ID
25
MSCS Installation start screen.
5. Setting and operation of MSCS software
5.1. installation
Insert the Installation CD. y
You can see following installation start screen. y
Select proper version for your product and star installation  y
MSCS supports Windows y® 2000, Windows® XP and Windows Vista™ only
               
						

							28
MIS-4220 / MIS-4220R / MIS-4230
29
Infinitely Expandable 
Main Image of MSCS (Multi Screen Control system)
5.2. Start MSCS
MSCS is an application program needed to control MPDP. y
When you execute MSCS (v 4.0) for your product at the installation screen, it will create a new folder  y
at C:\Program File\MSCS (v4.0) and an icon on your computer screen. 
By double clicking the MSCS (v 4.0) icon, the initial screen image of MSCS (v 4.0) will be  y
displayed as shown in the picture. 
※InputsourceisnotdisplayedontheMSCSscreen,butitisindicatedbycolors.
※DVI:Yellow,PC:Green,DTV:Pink,DVD:Purple,S-VIDEO:Brown,VIDEO:Gray
5.3. Setting 'Com Port'
Com Port connects or disconnects the communication between PC and MPDP. y
Connect MPDP to PC Com Port via RS-232C cable. y
 
 
Go to MSCS Menu → Communication and set Com Port. Click 'Connect' using mouse or press 'Ctrl+C'  y
using keyboard.
 
In order to disconnect communication, click 'Disconnect' using mouse or press 'Ctrl+D' using keyboard. y
When you use USB-to-RS232C converters, you need to set Com Port again, because MSCS uses one  y
of Com Port no. 1 to 30.
5.4. "new design/Last design" setting
When Com Port is successfully connected, pop-up window for "New design/Last design" appears.
Click "Open New Design" to prepare new configuration. y
 
Click "Open Last Design" to go to last design before closing. y
New/Last Design Set
Communication Setting
               
						

							30
MIS-4220 / MIS-4220R / MIS-4230
31
Infinitely Expandable 
5.5. Setting 'Multi-Screen' Configuration
SelectadesirableXnumberandYnumber
XnumberrepresentsthenumberofMPDPcolumnsandYnumberrepresentsthenumberof-
MPDProws.
TherangeofXandYis1to15.-
MPDPformatimagewillbedisplayedabout1secondafterselectinginputXnuberandY-
number.
SelectoneofinputsourcesfromDVI,PC,DTV,DVD,S-VIDEO,or
VIDEO.

Press"PlAY"button
Click"PLAY"buttonafterselectinginputsourceandthenumberofXandY,thenselectedscreen-
configurationisdisplayedasMPDPlikefollowingfigurebelow.



















Info:youcancheckselectedresolution.Itisdisplayedlowerrightcorneroftheproduct.-
Screen Configuration Setting
1
2
3
PC
PC
PC
PC
PC
PC
PC
PC
PC
5.6. MSCS instruction 
Check  "ALL PDP" to send data to all connected MPDP regardless of ID. y
In order to control power of specific MPDP, use "Power On/Off" button after selecting the specific MPDP. y
5.7. iD Setting
ID of MSCS(Multi Screen Control System) is set automatically. y
In order to transmit data to chosen MPDP, ID of Screen Configuration must be selected. y
Select ID using right button of mouse. Selected ID is displayed with red square box. y
Example of MPDP ID Setting
(InputsignalisDVI,Configurationis3by3)
MPDP Control - Power On/Off
Pleasewaitforabout10secondsafterconnectingpowerplugtoMPDP
oritmaynotworkproperly.
IncaseMPDPdoesnotworkproperly,pleasepulloutthepowerplug
andreconnecttheplug.Caution
ID 1  ID 2 ID 3
ID 4  ID 5 ID 6
ID 7  ID 8 ID 9
               
						

							32
MIS-4220 / MIS-4220R / MIS-4230
33
Infinitely Expandable 
SelectadesirableinputSourcein"SelectInput"
Ex)Select"DVI"in"SelectInput"-
Clickdesirablescreenwithleftbuttonofmousethenthescreenwould
beconvertedintoDVI.
Clicktheleftmousebuttononthescreenthatyouwanttochange.Screenwillbeturnedinto-
DVIinputscreen.
Youcanconfigureotherscreensinthesameway.
SelectedscreenwouldbeconvertedintoDVD.-
1
2
3
5.8. Configuration of various modes
You can configure various input sources as you want. y
DVI
PC
PC
PC
PC
PC
PC
PC
PC
DVI
PC
PC
PC
DVD
PC
PC
PC
DVD
※ Click 'Play' button on the main image of MSCS or scroll using mouse to return to initial image.
Selectadesirableinputsourcein"SelectInput"
Select"DVI"in"SelectInput".-
Selectscreenswithleftbuttonofmouseanddragfromthefirstscreen.
SelectedscreenswouldbeconvertedintoDVI.
1
2
3
5.9. Setting multi screens at a time
You can select multi screens at a time as you want. y
PC
PC
PC
PC
PC
PC
PC
PC
PC
DVI
DVI
PC
DVI
DVI
PC
PC
PC
PC
               
						

							34
MIS-4220 / MIS-4220R / MIS-4230
35
Infinitely Expandable 
5.10. Slide Control
MPDP configuration that users set is displaying repeatedly. y
To use Slide Control, go to MSCS Menu → Control → Slide Control or press "Ctrl+S" using Keyboard. y
Makeadesirableconfigurationin"ScreenConfigurations"
Set"DisplayTime"in"SlideControl"
Click"Add"buttontosaveconfiguration.-
Therangeof"DisplayTime"isfrom10secondsto1hour.-
1
2
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
Savevariousscreenconfigurationsinthesameway.
Click"SlideStart"todisplaysavedscreenconfigurations.
-Savedscreenconfigurationsaredisplayingforpresettime.
Check"Repeat"todisplaysavedconfigurationrepeatedly.
Click"Stop"buttontoend"SlideControl"
4
3
5
※To view the slide form, click 'List Box' of saved slide. 
※To transmit saved slide protocol command, double click 'List Box' of saved slide.
6
PC
PC
PC
DVI
DVI
DVI
DVI
DVI
DVI
DVI
DVI
PC
DVI
DVI
PC
PC
PC
PC
               
						

							36
MIS-4220 / MIS-4220R / MIS-4230
37
Infinitely Expandable 
5.11. Screen Control
Register values related to display of MPDP can be changed. y
Click "Picture Control" of "Control" menu bar or enter "Ctrl+P" in order to run "Picture Control" window. y
 
In order to control display values, input values directly in "Edit Box" and press Enter key.   y
Or click -/+ button using mouse.
 
Click "Exit" button or press "Ctrl+X" using keyboard to close "Picture Control" window. y
Color Temp. y
Normal:Initialsetting.Properfornormalvideoimageview.-
Studio:LowColortemperature.Properforbroadcastingpurpose.-
Picture Control
Go to "Control" in menu bar → PC Tracking → Auto in order to run "Tracking Auto" window.   y
  
In case alignment doesn't work through "Tracking Auto" command,  y
users can tune finely through "Tracking Manual". Go to "Control" of 
menu bar → PC Tracking → Manual or press "Ctrl+M" using keyboard.
"Tracking Manual" window enables users to set Frequency, Phase,  y
LineStart and PixelStart.
When "Tracking Manual" window is on display, users cannot display  y
"Picture Control" window.
  
Even when "Tracking Manual" window is on display, selecting 'ID' is  y
available by clicking right button of mouse. 
(Refer to "5.5 PDP ID Setting".) 
Detail adjustment steps are as follows. y
1) Tune "Phase" until the vertical lines are clearly adjusted..
2) Tune "LineStart" to adjust vertical alignment. "PixelStart" for horizontal alignment. 
3)  Adjust "Frequency" if alignment is still wrong. 
If you adjust "Frequency", repeat step 1) and 2) to fit alignment. 
Adjustable range is as follows
-The range of "Frequency" you can adjust is -50 to 50
-The range of "Phase" you can adjust is 0 to 31
-The range of "Linestart" you can adjust is -23 to 10
-The range of "Pixelstart" you can adjust is -50 to 40 
  
Click "Exit" button or press "Ctrl+X" using keyboard to close "Tracking Manual" window. y
5.12. PC Tracking 
Alignment adjustment is available when input source is PC. y
Tracking Manual Window