Optoma Zw210st Projector User Manual

							61English
Memory Drive Display
 Displays the projector mod el name, software version, and 
the memory device information.
Information   
						

							62English
USB Display
 When the projector detects that a computer is connected 
through the mini USB port, the projector enters USB 
display mode and displays the following screen:
USB Display
USB Displ ay
USB Displ
ayHow to use USB Display





Ensure USB cable is well connected to DISPL AY mini USB port





Computer will automatic execute the program dlusb_launcher.exe in the virtual CD-ROM





If the above does not happen, please execute the dlusb_launcher.exe manually
     from the virtual CD-ROM.
 Follow the instructions on the screen to establish the USB 
connection and project the computer screen through the 
projector.
 ►To change the source signal, press  on the 
control panel or the direct source signal key on the 
remote control.
USB Display mode  
						

							63English
USB Display
Minimum System Requirements
System Requirements
 ►CPU: Intel Dual Core 1.4GHz or better 
 ►Memory: 1GB of RAM
 ►Disk: 10MB of free disk space
 ►Graphic Card: nVIDIA or ATI graphic card with 64MB 
VRAM or above
1.  While the DSCP engine is active, the hardware acceleration level of 
the PC’s display card will be turned to “None” temporarily for best 
performance.
2.  If the Auto Play has been disabled on the current PC/Laptop, users 
need to find the CD-ROM and execute the DLUSB application 
manually.
3. The administrator right is required to execute the DLUSB through USB.
4.  If the PC/Laptop is entering sleep or hibernation status (S3/S4/S5), 
users have to run the DLUSB application again from the CD-ROM to 
resume the Display over USB.
5.  The screen projection performance varies depending on the PC 
computing power and could be up to 30FPS at SVGA resolution, 
20FPS at XGA resolution and 15FPS at WXGA(800) resolution.
6.  Need to enable EmulationOnly=1 to solve the overlay problem.
7.  Known issue: 
Y
Y Can’t capture DirectDraw/Direct3D overlay.
Y
Y Can’t capture OpenGL/DirectDraw Full Screen
Y
Y Can’t capture Windows login window, UAC secure desktop
Y
Y Will cause Media Player black screen due to enable the 
EmulationOnly=1   
						

							64English
Network Display
For Windows Systems
Features
1. Support Driverless Screen Capture
2. Support Screen Monitoring feature
3. Support Windows XP, Vista, 7 (32 bits, 64 bits)
4. Support Audio Projection feature
5. Support remote desktop feature
System Requirements
 ►CPU: Intel Dual Core 1.4GHz or better   
(PowerPC not supported)
 ►Memory: 1GB of RAM
 ►Disk: 10MB of free disk space
 ►Graphic Adaptor: nVIDIA or ATI graphic card with 64MB 
VRAM or above
 ►Operating System: Windows XP SP2/SP3 (32 and 64-
bit) / Vista (32 and 64-bit) / Windows 7 (32 and 64-bit)
 ►WiFi: 802.11n   
						

							65English
Network Display
For MAC-OS Systems
Features
1. Support Screen Mirroring
2. Support MAC OS 10.5, 10.6, 10.7
3. Support Audio  Projection   
(Optional, if connected receiver supported)
4. Support remote desktop feature   
(Optional, if connected receiver supported)
System Requirements
 ►CPU: Intel Dual Core 1.4GHz or better   
(PowerPC not supported)
 ►Memory: 1GB of RAM
 ►Disk: 10MB of free disk space
 ►Graphic Card: nVIDIA or ATI graphic card with 64MB 
VRAM or above
 ►Operating System: MAC OS X 10.5, 10.6  
(Not including 10.7) 
 ►WiFi: 802.11n
 ►Recommended Models: MacBook after 2009-01-21  
           All series of MacBook Pro 
           Mac  Book Air after 2010-06-08   
						

							66English
Network Display
Network Display mode
	The IP address 
generated by the 
projector varies 
depending on your 
local area network  
connection 
settings.
In Network Display mode, the projector supports remote 
projection from computers, tablets, and mobile phones when 
connected to an Ethernet or wireless network. Alternatively, 
you can control the computer remotely through the projector.
You can connect to the Optoma Web Utility page for 
conference projection using a web browser or download the 
Optoma Presenter Software for wireless projection right on 
your computer desktop.
You can also control and adjust the projection settings using 
the Crestron RoomView.
Activating Network Display Mode
1. Connect to the network (see “Connect to Network” on page 
16).
2. The projector automatically detects the connection. If not, 
repeatedly press 
 on the control panel or the  Source 
key on the remote control to switch the input source.
3. Once the projector detects the connection, the Network 
Display screen appears.
LOGIN CODE:
Server IP: 192.168.100.10Resolution: 1024x768
Ve rsion: 0.0.1.2 SSID: Network DisplayChannel: 8
Security: OFF
7272
Optoma Presentation 
System
Optoma Presentation  System
Quick Guid e
Quick Guid e
Quick Guid
e1. Make sure your WLAN is enabled, and connect to Optoma Presentation Sy\
stem.
2. Open your browser, or enter the IP address (refer to below server IP address)
3. Click on Download, and execute the installation program.
4. Make sure your personal firewall allows OPS software to pass through!\
5. Enter the LOGIN CODE to start projection!
4. Take note of the Login Code  and IP Address. You will 
need them to connect to Optoma Web Utility page (see 
“Open Optoma Web Utility” on page 67).  
						

							67English
Network Display
Open Optoma Web Utility
1. Connect your computer to the same network where the 
projector is connected.
2. Launch your web browser application (e.g. Internet 
Explorer, Safari, Firefox, etc).
3. On the address bar, type the IP address noted from the 
Network Display screen.
4. The Optoma Web Utility screen opens.
 ►To use Optoma Presentation Software, click the 
operating system of your computer to download the 
software (see "Downloading the Software" on page 
68).
 ►To use Crestron RoomView, click Crestron on the left 
panel menu (see "Crestron RoomView" on page 74 ).
 ►To project images from up to four computer 
simultaneously, click Conference Control on the left 
panel menu (see "Web Utility: Conference Control" on 
page 76).
 ►To change the projector settings by web utility, click 
Admin on the left panel menu. See "Web Utility: Admin 
Settings" on page 78 for more instructions.   
						

							68English
Network Display
Optoma Presentation Software
The Optoma Presentation Software (OPS) supports remote 
projection from up to four computers simultaneously. The 
computer must be connected in the same local area network 
as the projector and have OPS installed. You can also control 
the connected computer remotely using the projector.
For first time use, download OPS from the Optoma web utility.
Downloading the Software
1. Activate Network Display and open Optoma Web Utility 
(see “Network Display mode” on page 66).
2. On the Optoma Web Utility screen, click the operating 
system of your computer to start the download.
3. Click Run.
	Depending on 
your computer 
system, you may 
need to download 
the audio driver. 
Click the operating 
system of your 
computer and 
follow instructions 
on the screen.
	 The audio driver 
applies only if 
“Projection Quality” 
is “Normal”.
	 The following 
download   
procedures are 
based on Windows 
XP, similar steps 
apply to other  
operating systems.  
						

							69English
Network Display
4. The following message may appear, click Run to continue.
5. Click Next to continue.
6. Follow the on-screen instructions to complete the setup.
Once the installation is complete, the Optoma Presentation 
Software (OPS) automatically launches and searches for 
the projector. After the projector is detected, the login screen 
appears.   
						

							70English
Network Display
Login
1. On your computer, click Start > Programs > Optoma > 
OPS. Or, double-click the OPS icon on your desktop to 
launch the application.
2. Enter the Login Code  provided for in the Network Display 
screen (see step 3 of “Activating Network Display Mode” on 
page 66). 
3. Click OK.
	The Server IP 
and User Name 
are automatically 
detected by the 
software.