Optoma Zw210st Projector User Manual

21English
Using the Projector
Adjusting the Projector’s Focus
To focus the image, rotate the focus ring until the image is clear.  
 XGA series:  The projector will focus at distances from  
   1.64 to 8.2 feet (0.5 to 2.5 meters).
 WXGA series:  The projector will focus at distances from   
      1.64 to 8.2 feet (0.5 to 2.5 meters).
Adjusting Projection Image Size
 XGA series:  Projection Image Size from 39.3” to 196.5”   
   (1.0 to 4.99 meters).
 WXGA series: Projection Image Size from 44.6” to...

22English
Using the Projector
 This table is for user’s reference only.
XGA
 This table is for user’s reference only.
WXGA
Diagonal length (inch) size of 4:3 ScreenScreen Size W x H Projection Distance (D)Offset (Hd)(m)(inch) (m)(feet)
Width Height WidthHeight widetelewide tele(m)(feet)
40.00  0.81 0.61 31.89  24.02  0.50 0.50 1.64 1.64 0.09 0.30 
60.00  1.22 0.91 48.03  35.83  0.80 0.80 2.62 2.62 0.14 0.45 
70.00  1.42 1.07 55.91  42.13  0.90 0.90 2.95 2.95 0.16 0.53 
80.00  1.63 1.22 64.17  48.03...

23English
Using the Projector
Projecting Image
When the projector is turned on, it automatically searches for 
connected devices. 
Once a device is detected, the projector projects the image or 
the menu of the input source, such as in:
 ►Network Display: When a local area network or 
wireless network is detected (see "Connect to Network" 
on page 16).
 ►USB Display: When a computer is connected through 
the mini USB port of the projector (see "USB Display 
mode" on page 62).
 ►Memory...

24English
Adjusting the Settings
The Projector has a multilingual On-screen Display menu 
that allows you to make image adjustments and change your 
projector settings.
How to operate 
1. To open the OSD menu, press  on the control panel or 
Menu on the remote control.
2. When the OSD menu is displayed, use   keys to select 
an item on the main menu.
3. While a menu item is highlighted, press  or Enter to 
enter the sub menu.
4. Use the   keys to select the desired item and adjust 
the settings using the...

25English
Adjusting the Settings
Menu Tree
Main Menu Sub Menu Settings
ImageDisplay Mode
Presentation / Bright / 
Movie / sRGB / Blackboard / 
Classroom / User / 3D
Brightness -50 ~ 50
Contrast -50 ~ 50
Sharpness 1 ~ 15
1Color-50 ~ 50
1Tint-50 ~ 50
Advanced Gamma
Film / Video / Graphics / PC
BrilliantColor™ 0 ~ 10
Color Red Gain / Green Gain / Blue 
Gain / Red Bias / Green Bias 
/ Blue Bias / Cyan / Magenta / 
Yellow / Reset 
Color Space Auto / RGB / YUV
Auto / RGB (0~255) / RGB 
(16~235) / YUV
Input...

26English
Adjusting the Settings
Main MenuSub Menu Settings
SetupLanguage
English / Deutsch / Français / 
Italiano / Español / Português 
/ Svenska / Nederlands 
/ Norsk/Dansk / Polski / 
Русский / Suomi / ελληνικά / 
Magyar / Čeština / عربي / 繁
體中文 / 簡体中文 / 日本語 / 
한국어 / ไทย / Türkçe / Farsi
Projection Front / Front-Ceiling / Rear /  
Rear-Ceiling
Menu 
Location Top-Left / Top-Right / Center / 
Bottom-Left / Bottom-Right
2Screen Type
16:10 / 16:9 (WXGA only)
Network Network State
Read-Only
DHCP...

27English
Adjusting the Settings
	Please note that the on-screen display (OSD) menus vary according to t\
he signal type 
selected and the projector model you are using.
	 (
1) “Color” and “Tint” are only supported in Video mode. 
	 (
2) 16:9 or 16:10 depend on “Screen Type” setting (Available only in WXGA model).
	 (
3) “3D Sync Invert” is only available when 3D is enabled.
	 (
4) “Signal” is only supported in Analog VGA (RGB) signal.
Main Menu Sub Menu Settings
SetupVolume
0~100
Advanced Logo...

28English
Adjusting the Settings
IMAGE
 Display Mode
 The projector comes with factory presets designed for 
various types of images. Select an appropriate display 
mode for your source.
 ►Presentation: Good color and brightness suitable for 
PC input.
 ►Bright: Maximum brightness suitable for PC input.
 ►Movie: For home theater.
 ►sRGB: Standardised accurate color.
 ►Blackboard: Select this mode to achieve optimum color 
settings when projecting onto a green blackboard.
 ►Classroom: This mode is...

29English
Adjusting the Settings
	“Saturation” and 
“Tint” func-
tions are only 
supported under 
Video mode.
 Brightness
 Adjust the brightness of the image.
 ►Press the  to darken image.
 ►Press the  to lighten the image.
 Contrast
 Contrast controls the degree of dif ference between the 
lightest and darkest parts of the picture. 
 ►Press the  to decrease the contrast.
 ►Press the  to increase the contrast.
 Sharpness
 Adjust the sharpness of the image.
 ►Press the  to decrease the sharpness.
 ►Press...

30English
Adjusting the Settings
IMAGE | Advanced
 Gamma
 This allows you to choose a gamma table that has been  
fine-tuned to bring out the best image quality for the input.
 ►Film: for home theater.
 ►Video: for video or TV source.
 ►Graphics: for image source.
 ►PC: for PC or computer source.
 BrilliantColor™
 This adjustable item utilize s a new color-processing 
algorithm and system level enhancements to enable 
higher brightness while providing true, more vibrant colors 
in picture. The range is...