Optoma X600 Projector User Manual

							English
21
User Controls
Menu Tree
IMAGEDisplay Mode
Sharpnes s
Brightness
Advanced#Tin t#Color
IMAG E | AdvancedBrilliantColorTMNoise Reduction
GammaColor Temp.Color Spac eColor SpaceColor Matching (saved by signal)
Signal
Exit
Auto Keystone
SETUP | SecuritySecurity Settin gSecurity TimerChange PasswordExit
Auto/RGB/YUVWarm/Standard/Cool/Col dFilm/Video/Graphic/Standar d
Presentation/Bright/Movie/sRGB/Blackboard/DICOM SIM./User/3 D
Auto/RGB(0-255)/RGB(16-235)/YUV
Automatic/Frequency/Phase/H. Position/V. Position/Exit
Format
Edge MaskZoomH Image Shif
tV Image ShiftV Keystone
DISPLA Y4:3/16:9/Native/Auto (XGA )
4:3/16:9/LBX/Nat ive/Auto (1080p )
3D ModeDLP-Link/VESA 3D3D->2D3D Format3D Sync InvertExit
Red/Green/Blue/Cyan/Magenta/Yellow/White/Reset/Exi t
On/Off
3D/L/RAuto/SBS/Top and Bottom/Frame SequentialOn/Off
LanguageSETUP
Projection
Menu Location
SecurityProj ector IDAudi o Settings
On/OffMonth/ Da y/Hour/Exi t
Control Setting s
SETUP | Audio SettingsInternal SpeakerMuteVolumeAudio Inpu tExit
On/Off
On/Off
0~10
Default /Audio 1/Audio  2
SETUP | Advanced
SETUP | Networ k
LogoLogo CaptureClosed CaptioningExit
Optoma/Neutral/User
Off/CC1/CC2
Contrast
Rese t
Advanced
Crestron/Extron/PJ Link/AMX Device Discovery/Telnet/ExitLAN SettingsNetwork Status/DHCP/IP Address/Subnet Mask/Gateway/DNS/Apply/MAC Address\
/Exi t
Network
*3D
DISPLAY | 3D
*HDMI only
Bahasa Indonesia
NoteNote
 p(#) “Color” and “Tint” is only supported in for YUV video sources. p(*) “3D” is only available when a compatible signal is supplied.      
						

							22
User Controls
Function 1
Function  2
IR Function
Remote CodeBrightness/Contrast/Color/Color Temp./Gamma
Source Lock/Projection/Lamp Settings/Mute/Digital Zoom
Exit
On/OffAll ~ 99
OPTION SSource LockHigh Altitud eInformation HideKeypad Lock
Background Colo r
On/Off
Lamp Settings
ResetCurrent/All
On/Off
On/Off/Auto 3D
Input SourceVGA 1/VGA 2/Video/S-Video/HDMI 1/HDMI 2/Display Port/Exit
On/OffOn/Off
OPTIONS | Adva ncedDirect Power On
Auto  Power Off (min)Sleep Timer (min )
On/OffSignal Power OnOn/Off
Quick Resume
Exit
On/OffPower Mode (Standby)Active/ECO
OPTIONS | Lamp SettingLamp Hour
Lamp Rese tExitYes/N o
On/Off
OPTIONS | Remote Setting
Test Pattern
Information
Blue/Black/Red/Green/W hite
12V TriggerRemote Settin g
Advanced
None/Grid/White
Lamp Reminder
Br ightness Mode Bright/Dynamic/Eco+     
						

							English
23
User Controls
Image
 Display Mode
There are many factory presets optimized for various types of 
images.
 
Presentation: Good color and brightness from PC input.
 
Bright: Maximum brightness from PC input.
 
Movie: For home theater.
 
sRGB: Standardised accurate color.
Blackboard:   This mode should be selected to achieve optimum color settings when projecting onto a blackboard 
(green).
DICOM SIM:   This display mode simulates the grayscale/gamma performance of equipment used for “Digital Imaging and Com  munications in Medicine” (DICOM). 
Important: This mode should NEVER be used for medical 
diagnosis, it is for education/training purposes only.
 
User: User’s own settings.
 
3D: User adjustable setting for 3D viewing.
 Brightness
Adjust the brightness of the image.
 Press ◄ to darken image.
 Press ► to lighten the image.      
						

							24
User Controls
 Contrast
The contrast controls the degree of difference between the 
lightest and darkest parts of the picture.
 Press ◄ to decrease the contrast.
 Press ► to increase the contrast.
 Sharpness
Adjusts the sharpness of the image.
 Press ◄ to decrease the sharpness.
 Press ► to increase the sharpness.
 Color
Adjusts a video image from black and white to full color saturation.
 Press ◄ to decrease the amount of color in the image.
 Press ► to increase the amount of color in the image.
 Tint
Adjusts the color balance of red and green.
 Press ◄ to increase the amount of green in the image.
 Press ► to increase the amount of red in the image.
 Advanced
Enter the Advanced menu. Select advanced display options such 
as Noise Reduction, BrilliantColor™, Gamma, Color Temp., Color 
Space, Color Matching, Signal, and Exit. See page 25 for more 
information.     
						

							English
25
User Controls
 Noise Reduction
The motion Adaptive Noise Reduction reduces the amount of 
visible noise in interlaced signals. The range is from “0” to “\
10”. 
(0=Off)
 BrilliantColor™
This adjustable item utilizes a new color-processing algorithm and  
system level enhancements to enable higher brightness while 
providing true, more vibrant colors in picture. The range is from 
1 to 10. If you prefer a stronger enhanced image, adjust toward 
the maximum setting. For a smoother, more natural image, adjust 
toward the minimum setting.
 Gamma
Choose the Gamma type from Film, Video, Standard.
 Color Temp
Adjust the color temperature. Cold temperature, the screen looks 
colder; with Warm temperature, the screen looks warmer.
 Color Space
Select an appropriate color matrix type from AUTO, RGB, YUV.
 
For HDMI only: Select color matrix from Auto, RGB (0-255), 
RGB (16-235), YUV.
Image | Advanced      
						

							26
User Controls
 Color Matching
Enter the Color Matching menu. See page 27 for more details.
 Signal
Enter the Signal menu. Set projector signal properties. The 
function is available when input source is support VGA 1/VGA 2. 
See page 28 for more information.     
						

							English
27
User Controls
 Colors (Except White)
Press ▲▼ to select a color and press “ENTER” to adjust the hue, 
saturation, and gain settings.
Press ▲▼ to select Hue, Saturation, or Gain and press ◄► to 
adjust the settings.
 White
Press ▲▼ to select White and press “ENTER”.
Press ▲▼ to select Red, Green, or Blue and press ◄► to adjust 
the settings.
Reset
Reset all Color Setting values to the factory default.
Image | Advanced | 
Color Matching
NoteNote
 pGreen, Blue, Cyan,Yellow, Magenta can be separate adjust by each color HSG. pWhite can be adjust Red, Green, Blue color by each.      
						

							28
User Controls
 Automatic
Set Automatic to On or Off to lock or unlock the Phase and 
Frequency features.
 
Disable—Off auto lock.
 
Enable—On auto lock.
 Frequency
Change the display data frequency to match the frequency of your 
computer’s graphics card. If you experience a vertical flickering 
bar, use this function to make an adjustment.
 Phase
Phase synchronizes the signal timing of the display with the 
graphics card. If you experience an unstable or flickering image, 
use this function to correct it.
 H. Position
 Press ◄ to move the image left.
 Press ► to move the image right.
 V. Position
 Press ◄ to move the image down.
 Press ► to move the image up.
Image | Advanced | 
Signal     
						

							English
29
User Controls
Display
 Format
Use this function to choose your desired aspect ratio.
 
4:3: This format is for 4x3 input sources not enhanced for Wide screen TV.
 
16:9: This format is for 16x9 input sources, like HDTV and DVD enhanced for Wide screen TV.
 
LBX: This format is for non-16x9, letterbox source and for users who use an external 16x9 lens to display 2.35:1 aspect ratio using full resolution.
 
Native: Depends on the resolution of the input source – No scaling is performed.
 
Auto: Automatically selects the appropriate format.
XGA
1080p      
						

							30
User Controls
 Zoom
 Press ◄ to reduce the size of the image.
 Press ► to magnify an image on the projected screen.
 Edge Mask
Edge Mask function removes the noise in a video image. Edge 
Mask the image to remove video encoding noise on the edge of 
video source.
 H Image Shift
Shifts the projected image position horizontally.
 Press ◄ to move the image left on the projected screen.
 Press ► to move the image right on the projected screen.
 V Image Shift
Shifts the projected image position vertically.
 Press ► to move the image up on the projected screen.
 Press ◄ to move the image down on the projected screen.
 V Keystone
Press ◄ or ► to compensate for vertical images distortion when 
the projector is positioned at an angle to the screen.
 Auto Keystone
Press ◄ or ► to enable or disable auto keystone.
 3D
Enter the 3D menu. Select 3D options such as 3D Mode, 
3D->2D, 3D Format, and 3D Sync Invert. See page 31 for more 
information.