Optoma X600 Projector User Manual

English
51
User Controls
 Lamp Reset
After replacing the lamp, reset the lamp counter to accurately 
reflect the new lamp’s life span.
1. Select Lamp Reset.
A confirmation screen displays.
2. Select Yes to reset the lamp counter to zero.      

52
User Controls
LAN_RJ45
For simplicity and ease of operation, the Optoma projector 
provides diverse networking and remote management features.
The LAN/RJ45 function of the projector through a network, such 
as remotely manage: Power On/Off, Brightness and Contrast 
settings. Also, projector status information, such as: Video-
Source, Sound-Mute, etc.
 Wired LAN Terminal functionalites
The projector can be controlled by a PC (Laptop) or other external 
device via LAN/RJ45 port and compatible with...

English
53
User Controls
This projector supports all commands of PJLink Class1 (Version 
1.00).
http://pjlink.jbmia.or.jp/english/
For more detail of information about the diverse types of 
external devices which can be connected to the LAN/RJ45 port 
and remote/control the projector, as well as the related control 
commands supporting for each external device, kindly please get 
contact with the Support-Service directly.
 LAN_RJ45
1. Connect an RJ45 cable to RJ45 ports on the projector and the PC...

54
User Controls
3. Right Click on your Local Area Connection, and select Property.
4. In the Properties window, select the General tab, and select 
Internet Protocol (TCP/IP).
5. Click Properties.     

English
55
User Controls
6. Fill in the IP address and Subnet mask, then press OK. 
7. Press the Menu button on the projector.
8. Select OSD-> SETUP-> Network Settings-> Lan Settings.
9. After getting into Network Status, input the following:
DHCP: Off
IP Address:  10.10.10.10
Subnet Mask:   255.255.255.0
Gateway:  0.0.0.0
DNS:  0.0.0.0
10. Press “ENTER” / ► to confirm settings.
11. Open a web browser (ex, Microsoft Internet Explorer with Adobe 
Flash Player 9.0 or higher).
12. In the Address bar,...

56
User Controls
13. Press “ENTER” / ►.
The projector is setup for remote management. The LAN/RJ45 
function displays as follows.NoteNote
For more information, please visit http://www.crestron.com     

English
57
User Controls
CategoryItemInput-Length
Crestron Control
IP Address15
IP ID3
Port5
Projector
Projector Name10
Location10
Assigned To10
Network Configuration
DHCP (Enabled)(N/A)
IP Address15
Subnet Mask15
Default Gateway15
DNS Server15
User Password
Enabled(N/A)
New Password10
Confirm10
Admin Password
Enabled(N/A)
New Password10
Confirm10
For more information, please visit http://www.crestron.com.
 Preparing Email Alerts
1. Make sure that user can access the homepage of LAN RJ45 
function by web...

58
User Controls
3. By default, these input boxes in Alert Settings are blank. 
4. For Sending alert mail, input the following:
 
The SMTP field is the mail server for sending out email (SMTP protocol). This is a required field.
 
The To field is the recipient’s email address (for example, the projector administrator). This is a required field. 
 
The Cc field sends a carbon copy of the alert to the specified email address. This is an optional field (for example, the projector administrator’s...

English
59
User Controls
 RS232 by Telnet Function
Besides projector connected to RS232 interface with “Hyper-
Terminal” communication by dedicated RS232 command control, 
there is alternative RS232 command control way, so called 
“RS232 by TELNET” for LAN/RJ45 interface.
 Quick Start-Guide for “RS232 by TELNET”
Check and get the IP-Address on OSD of the projector.
Make sure that laptop/PC can access the web-page of the 
projector.
Make sure that “Windows Firewall” setting to be disabled in case 
of...

60
User Controls
2. Input the command format like the below:
telnet  ttt.xxx.yyy.zzz  23 (“Enter” key pressed)
(ttt.xxx.yyy.zzz: IP-Address of the projector)
3. If Telnet-Connection ready, and user can have RS232 command 
input, then “Enter” key pressed, the RS232 command will be 
workable.
 How to have TELNET enabled in Windows VISTA / 7
By default installation for Windows VISTA, “TELNET” function is 
not included. But end-user can have it by way of “Turn Windows 
features On or Off” to be enabled.
1....