Optoma X501 Projector User Manual

EN-31
Menu tree
Main Menu Sub-MenuSingle-Item 
Menu
IMAGEDisplay ModePresentation / 
Bright / Movie / 
sRGB / 
Blackboard / 
DICOM SIM / 
User / 3D
Brightness
Contrast
Sharpness
Color
Tint
AdvancedGamma1.8 / 2.0 / 2.2 / 
2.6 / Film /Video 
/ Graphic
BrilliantColor™
Color Temp.Warm / Medium 
/ Cold
Color SettingsRedHue / Saturation 
/ Gain
GreenHue / Saturation 
/ Gain
BlueHue / Saturation 
/ Gain
CyanHue / Saturation 
/ Gain
MagentaHue / Saturation 
/ Gain
Ye l l o wHue / Saturation 
/ Gain
WhiteRed /...

 EN-32
IMAGEAdvancedSignalAutomatic On / Off
Phase (VGA)
Frequency 
(VGA)
H. Position 
(VGA)
V. Position 
(VGA)
Exit
Exit
Reset Yes / No
DISPLAYFormatXGA:
4:3 / 16:9 / 
Native / Auto
WXGA/1080P:
4:3 / 16:9 or 
16:10 / LBX / 
Native / Auto
Edge Mask
Zoom
Image ShiftH
V
V Keystone
Auto Keystone On / Off
3D3D Mode DLP-Link / IR
3D--->2D 3D / L / R
3D FormatAuto / SBS / Top 
and Bottom / 
Frame 
Sequential
3D Sync Invert On / Off
SETUPLanguage
Projection
Menu Location
Screen Type16: 10/16:9 
(WXGA) 

EN-33
SETUPSecuritySecurity On / Off
Security TimerMonth / Day / 
Hour
Change Password
Exit
Projector ID
Audio SettingsInternal Speaker On / Off
Mute On / Off
Vo lu m eAudio
Mic
Audio InputDefault / Audio 
1 / Audio 2 / 
Audio 3
AdvancedLogoDefault / Neutral 
/ User
Logo Capture
Closed Captioning Off / CC1 / CC2
Exit
Network LAN SettingsNetwork StatusConnected / 
Disconnected
MAC Address
DHCP On / Off
IP Address
Subnet Mask
Gateway
DNS
Exit
WLAN SettingsWLAN On / Off
Network StatusConnected /...

 EN-34
OPTIONSInput SourceVGA1 / VGA2 / 
Video / S-video / 
HDMI / DVI / 
Flash drive/ 
Network 
display/ USB 
display
Source Lock On / Off
High Altitude On / Off
Information Hide On / Off
Keypad Lock On / Off
Test PatternNone / Grid / 
White
12V TriggerOn / Off / Auto 
3D
IR FunctionOn / Front / 
Back / Off
Background ColorBlack / Red / 
Blue / Green / 
White
Remote SettingsDisplay Mode / 
Format / 3D 
Sync Invert / 
Mute / Test 
Pattern / DVI / 
VGA2 / Network 
Display
AdvancedDirect Power On On / Off...

EN-35
IMAGE
Display Mode
There are many factory presets optimized for various types of images.
„Presentation: Good color and brightness from PC input.
„Bright: Maximum brightness from PC input.
„Moive: For home theater.
„sRGB: Standardised accurate color.
„Blackboard: This mode should be selected to achieve optimum color 
settings when projecting onto a blackboard (green).
„User: User’s settings.
„DICOM SIM: Recommended for DICOM format files in 
simulation mode.
„3D: Recommended setting for 3D mode. Any...

 EN-36Set the difference between light and dark areas.
Sharpness
Sharpen or soften the image.
Color
Adjust a video image from black and white to fully saturated color.
Tint
Shift colors toward red or green.
Note
„“Color” and “Tint” functions are only supported under Video mode.
Advanced
Gamma
This allows you to choose a degamma table that has been fine-tuned to bring 
out the best image quality for the input.
„Film: for home theater.
„Video: for video or TV source.
„Graphics: for image source.
„2.2: for...

EN-37 Color Temp.
If set to cold temperature, the image looks more blue. (cold image)
If set to medium temperature, the image maintains normal colorings for 
white.
If set to warm temperature, the image looks more red. (warm image)
Color Settings
Press  / /“Enter” key to enter the next menu as below and then use  / /
/
  key to select color. Press “Enter” to finalize the selection.
„Red/Green/Blue/Cyan/Magenta/Yellow/White: Use  /  to toggle Hue/
Saturation/Gain and then use  /  to adjust the value....

 EN-38
Reset
Return the display parameters on IMAGE menu to the factory default set-
tings. 

EN-39
DISPLAY
Format
Use this function to choose your desired aspect ratio.
For XGA model:
For WXGA model:
16:9 or 16:10 depend on “Screen Type” setting.
16:10 Screen
Source 480i/p  576i/p1080i/p  720p
4:3 1024x768 center
16:9 1024x576 center
Native  Displays the original image without any scaling.
Auto (Default) If source is 4:3, auto resize to 1024 x 768.
If source is 16:9 auto resize to 1024 x 576.
If source is 15:9 auto resize to 1024 x 614.
If source is 16:10 auto resize to 1024 x 640.
16 : 10...

 EN-40
16:9 Screen
For 1080P model:
Edge Mask
Edge Mask function removes the noise in a video image. Overscan the 
image to remove video encoding noise on the edge of video source.
Note
„Each I/O has different setting of “Edge Mask”.
„“Edge Mask” and “Zoom” can’t work at same time.
Zoom
Zoom in and out the images.
Image Shift
Shift the projected image position horizontally and vertically.
V Keystone
Adjust image distortion vertically. If the image looks trapezoidal, this option 
can help make the image...