Optoma W304m Projector User Manual

41
Setup | Advanced
Logo
Select the screen to display during startup.
4Default—the supplied default startup screen.
4Neutral—is Background Color.
4User—customized screen capture using the Logo Capture function.
Logo Capture
Capture a displayed screen to use as the startup screen.
1.  Display the desired screen on the projector.
2.  Select Logo Capture from the Advanced menu.
A confirmation screen displays.
3. Select OK. Screen capture in progress.
Screen capture succeeded displays. The captured screen is...

42
Options
Input Source
Enter the Input Source menu.
See page 45 for more information.
Source Lock
Lock the current source as the only available source, even if the 
cable is unplugged. 
4On—only the current source is recognized as an input source.
4Off—all sources selected in Image | Advanced | Input Source are recognized as an input source.
High Altitude
Adjust the fan speed to reflect the environment.
4On—increases fan speed for high temperature, humidity, or altitude.
4Off—regular fan speed for...

43
Options
Keypad Lock
In the top left of display, message must over ride “Information 
Hide.”
Every time Keypad is pressed, Keypad Lock logo displays again 
for 10 sec.
Keypad lock OSD. In the top left of display:
User could unlock keypad by following methods:1.  Press  Enter on the keypad for 7 sec and the keypad is 
unlocked.
2.  Use remote to access OSD menu to set “off”.
In the top left of display, message must over ride “Information 
Hide.”
Test Pattern
Display a test pattern. There are Grid, White...

44
Options
Advanced
Enter the Advanced menu. See page 46 for more information.
Lamp Setting
Enter the Lamp Setting menu.
See page 48 for more information.
Reset
Reset all Options to default factory settings.
User Controls 
English   

45
Options | Input Source
Use this option to enable / disable input sources. Press Enter to 
enter the sub menu and select which sources you require. Press 
Enter to finalize the selection. The projector will not search for 
inputs that are not selected.
User Controls 
English  

46
Options | Advanced
Direct Power On
Enable or disable Direct Power On.
4On—the projector powers on automatically when AC power is supplied.
4Off—the projector must be powered on as normal.
Auto Power Off
Set the Auto Power Off interval. The projector powers off the 
lamp after 30 minutes of no signal by default. The following 
warning is displayed 60 seconds before power off.
Sleep Timer
Set the Sleep Timer interval. The projector powers off after the 
specified time period of inactivity (regardless of...

47
Options | Advanced
Quick Resume
If Quick Resume is On, the projector can resume operating soon 
provided the projector is turned back on within 100 seconds of 
being turned off.
Power Mode (Standby)
Set standby power mode status ( upper to 0.5w or lower to 0.5w).
4Eco.—Choose Eco. to save power dissipation further < 0.5W.
4Active—Choose Active to return to normal standby and the VGA out port will be enabled.
User Controls 
English  

48
Options | Lamp Setting
Lamp Hour
Displays the number of hours the lamp has been active. This item 
is for display only.
Lamp Reminder
Enable or disable the lamp life span reminder. 
4On—a warning message displays when remaining lamp life is less than 30 hours.
4Off—no warning message displays.
Brightness Mode
Select the lamp brightness mode.
4Bright—the default setting.
4Eco—lower brightness setting to conserve lamp life.
Lamp Reset
After replacing the lamp, reset the lamp counter to accurately...

49
Troubleshooting
If you experience a problem with your projector, please refer to 
the following information. If a problem persists, please contact 
your local reseller or service center.
Image Problems
No image appears on-screen4
Ensure all the cables and power connections are correctly and securely connected as described in the  “Installation” section.
4Ensure all the pins of connectors are not bent or broken.
4Check if the projection lamp has been securely installed. Please 
refer to the “Replacing...

50
4If you are using a Notebook:1.  First, follow the steps above to adjust resolution of the   
computer.
2.  Press the toggle output settings. Example: [Fn]+[F4]
Acer 
  
[Fn]+[F5]
Asus    [Fn]+[F8]
Dell    [Fn]+[F8]
Gateway  
  [Fn]+[F4]
Mac Apple: 
System Preference  Display  Arrangement  Mirror 
display IBM/Lenovo 
[Fn]+[F7]
[Fn]+[F4]
HP/Compaq 
NEC  
   [Fn]+[F3]
Toshiba     [Fn]+[F5]
If you experience difficulty changing resolutions or your 
monitor freezes, restart all equipment including the...