Optoma Tx778w Projector User Manual
Here you can view all the pages of manual Optoma Tx778w Projector User Manual. The Optoma manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
5English Appendices Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the “” button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Use a screwdriver to unscrew the screw (Lamp Cover) from the rear side. 5. Press down the two “” on the cover simultaneously. 6. Open and remove the top cover. 7. Use a screwdriver to unscrew the 2 screws from the lamp module. 8. Pull up the lamp handle carefully. 9....
Page 52
52English Appendices Compatibility Modes ModeResolutionV-Sync (Hz) AnalogDigital VGA640 x 35070, 8570, 85 VGA640 x 4008585 VGA640 x 48060, 72, 75, 8560, 72, 75, 85 VGA720 x 40070, 8570, 85 SVGA800 x 60056, 60, 72, 75, 8556, 60, 72, 75, 85 XGA1024 x 76860, 70, 75, 8560, 70, 75, 85 SXGA1152 x 86470, 75, 8570, 75, 85 SXGA1280 x 102460, 75, 8560, 75, 85 SXGA+1400 x 10506060 UXGA1600 x 12006060 MAC LC 13”640 x 48066.66*** MAC II 13”640 x 48066.68*** MAC 16”832 x 62474.55*** MAC 19”1024 x 76875*** MAC1152...
Page 53
53English Appendices RS232 Commands Pin no.Spec. 1N/A 2RXD 3TXD 4N/A 5GND 6N/A 7N/A 8N/A 9N/A 12345 6789 RS232 Pin Assignments
Page 54
54English Appendices RS232 Protocol Function List RS232 Commands Baud Rate : 9600Data Bits: 8Parity: NoneStop Bits: 1 Flow Control : NoneUART16550 FIFO: DisableProjector Return (Pass): PProjector Return (Fail): F XX=01-99, projector's ID,XX=00 is for all projectors SEND to projector----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 232 ASCII Code HEX Code...
Page 55
55English Appendices SEND to projector -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 232 ASCII Code HEX Code Function Description -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ~XX73 n...
Page 56
56English Appendices Please note that damage result-ing from incorrect installation will invalidate the warranty. Ceiling Mount Installation 1. To prevent damaging your projector, please use the Optoma’s recommended mount package for installation. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attached a mount to the projec- tor met the following specifications: Screw type: M4 Screw length: 8mm Warning: 1. If you buy the ceiling mount from other...
Page 57
57English Appendices Optoma Global Offices For service or support please contact your local office. USA 715 Sycamore Drive Tel : 408-383-3700 Milpitas, CA 95035, USA Fax : 408-383-3702 www.optomausa.com Service : [email protected] Canada 5630 Kennedy Road, Mississauga, ON, L4Z 2A9, Canada Tel : 905-361-2582 www.optoma.ca Fax : 905-361-2581 Europe 42 Caxton Way, The Watford Business Park Watford, Hertfordshire, WD18 8QZ, UK Tel : +44 (0) 1923 691 800 www.optoma.eu Fax : +44 (0) 1923...
Page 58
58English Appendices Korean WOOMI TECH.CO.,LTD. 4F,Minu Bldg.33-14, Kangnam-Ku, Tel : +82+2+34430004 seoul,135-815, KOREA Fax : +82+2+34430005 Japanese 東京都足立区綾瀬3-25-18 オーエス本社ビル E-mail : [email protected] サポートセンター:0120-46-5040 www.os-worldwide.com Taiwan 5F., No. 108, Minchiuan Rd. Tel : +886-2-2218-2360 Shindian City, Fax : +886-2-2218-2313 Taipei Taiwan 231, R.O.C. Service : [email protected] www.optoma.com.tw asia.optoma.com Hong Kong Unit A, 27/F Dragon Centre, 79 Wing Hong Street,...
Page 59
59English Appendices Regulation & Safety notices This appendix lists the general notices of your projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable p r o t e c t i o n a g a i n s t h a r m f u l i n t e r f e r e n c e i n a r e s i d e n t i a l installation. This device generates, uses, and can...
Page 60
60English Appendices Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, i n c l u d i n g i n t e r f e r e n c e t h a t m a y c a u s e u n d e s i r e d operation. Notice: Canadian users T h i s C l a s s B d i g i t a l a p p a r a t u s c o m p l i e s w i t h C a n a d i a n...