Optoma Tw610sti+ Projector User Manual

11English
Introduction
6
1. Battery Cover 
2. Mouse Right Click
3. Menu
4. Mouse Left Click
Interactive Pen
5
1
8
74
32
Battery Installation:
1. Press firmly and slide the battery cover off. 1
2. Install new batteries (AAA). Ensure that you have the batter-ies’ polarity (+/–) aligned correctly. 2
3. Slip the cover back over the batteries until it snaps into place.
5.  Lens
6. Nib 
7. Power On/Off
8. LED Indicators
1
2
3
	The interactive pen is optional accessory.
 Warning: •  Danger of explosion if...

12English
Installation
Connecting the Projector
	Due to the difference in applications for each country, some regions may have different accessories.
	(*) Optional accessory 
AUDIO OUTAUDIO1-IN
(VGA1/VGA2)
RS-232
MIC L RAUDIO 2-IN (S-VIDEO/VIDEO)
VIDEO
S-VIDEOHDMIVGA-OUTVGA1-IN / YPbPr
VGA2-IN / YPbPr
RJ-45
PB/MOUSE SERVICE12V OUTUSB /DISPLAY
m o l e x
MOLEX
m o l ex
MOLEX
E62405SP
R1
24
5
1....................................................................................................Power...

13English
Installation
Connect to Video Sources
	Due to the difference in applications for each country, some regions may have different accessories.
	(*) Optional accessory 
AUDIO OUTAUDIO1-IN
(VGA1/VGA2)
RS-232
MIC L RAUDIO 2-IN (S-VIDEO/VIDEO)VIDEO
S-VIDEOHDMIVGA-OUTVGA1-IN / YPbPr
VGA2-IN / YPbPrRJ-45PB/MOUSE SERVICE12V OUTUSB /DISPLAY
E62405SPR
1....................................................................................................Power...

14English
Installation
Powering the projector On / Off
	Turn on the projector first and then select the signal sources.
Powering On the Projector
1. Remove the lens cap. 
2. Securely connect the power cord and signal cable. When 
connected, the POWER/STANDBY LED will turn Amber. 
3. Turn on the lamp by pressing “” button either on the top of 
the projector or on the remote. The POWER/STANDBY LED 
will now turn Green. 
 The startup screen will display in approximately 10 seconds. 
The first time you...

15English
Installation
	Contact the nearest service center if the projector displays these symptoms. See pages 86-87 for more information.
Warning Indicator
When the warning indicators (see below) come on, 
the projector will automatically shutdown: 
 “LAMP” LED indicator is lit red and if “POWER/STANDBY” 
indicator flashes amber.
 “TEMP” LED indicator is lit red and if “POWER/STANDBY” 
indicator flashes amber. This indicates the projector has 
overheated. Under normal conditions, the projector can be...

16English
Installation
Adjusting the Projected Image
Adjusting the Projector’s Height 
The projector is equipped with elevator feet for adjusting 
the image height.
1. Locate the adjustable foot you wish to modify on the 
underside of the projector. 
2. Rotate the adjustable ring clockwise to raise the projector 
or counter clockwise to lower it. Repeat with the remaining 
feet as needed.
Tilt-Adjustment Feet
Tilt-Adjustment Ring 

17English
Installation
Adjusting the Projector’s Focus
To focus the image, rotate the focus ring until the image is clear.  
 XGA series: The projector will focus at distances from 1.64 
to 12.46 feet (0.5 to 3.8 meters).
 WXGA series: The projector will focus at distances from 1.64 
to 11.15 feet (0.5 to 3.4 meters).
Adjusting Projection Image Size
 XGA series: Projection Image Size from 41.0” to 312.0” (1.0 
to 7.9 meters).
 WXGA series: Projection Image Size from 44.6” to 303.0” 
(1.1 to 7.7...

18English
Installation
 This table is for user’s reference only.
XGA
 This table is for user’s reference only.
WXGA
Diagonal length (inch) size of 4:3 Screen
Screen Size W x HProjection Distance (D)Offset (Hd)(m)(inch)(m)(feet)
WidthHeightWidthHeightwidetelewidetele(m)(feet)
40.00 0.81 0.61 31.89 24.02 0.50 0.50 1.64 1.64 0.09 0.30 
60.00 1.22 0.91 48.03 35.83 0.80 0.80 2.62 2.62 0.14 0.45 
70.00 1.42 1.07 55.91 42.13 0.90 0.90 2.95 2.95 0.16 0.53 
80.00 1.63 1.22 64.17 48.03 1.00 1.00 3.28 3.28 0.18...

19English
User Controls
Control Panel
Control Panel & Remote Control
LAMPTEMP
POWER/STANDBY
MENUSOURCE
Using the Control Panel
POWERRefer to the “Power On/Off the Projector” section on 
pages 14-15.
RE-SYNCAutomatically synchronize the projector to the input 
source.
Enter / Help  / 
Confirm your item selection.
  Help Menu (only available when OSD menu is not shown).
SOURCEPress “SOURCE” to select an input signal.
MenuPress “Menu” to launch the on-screen display 
(OSD) menu. To exit OSD, Press “Menu”...

20English
User Controls
Remote Control
Using the Remote Control
Power  
Refer to the “Power On/Off the Projector” 
section on pages 14-15.
L ButtonMouse left click.
R ButtonMouse right click.
Page +Use this button to page up.
Page -Use this button to page down.
Enter  / Help 
Confirm your item selection.
   Help Menu (only available when OSD menu is not shown).
SourcePress “Source” to select an input signal.
Re-SYNC Automatically synchronizes the projector to 
the input source.
Four Directional 
Select...