Optoma Tw610st Projector User Manual
Have a look at the manual Optoma Tw610st Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1077 Optoma manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31English User Controls DISPLAY Format Use this function to choose your desired aspect ratio. XGA 4:3: This format is for 4×3 input sources. 16:9-I: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV. (576i/p) 16:9-II: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV. (480i/p) Native: This format displays the original image without any scaling. AUTO: Automatically selects the appropriate display format. When input is 4:3, the image is displayed as 4:3. When input is 16:9 above, the image is displayed as 16:9- I Aspect ratio (source detected) Resize image XGA model 4:3 1024 x 768 center 16:9-I 1024 x 576 center 16:9-II 854 x 480 center Native Resize image of native change to above description not pixels resolution.
32 English User Controls WXGA 4:3: This format is for 4×3 input sources. 16:9: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV. 16:10: This format is for 16×10 input sources, like widescreen laptops. LBX: This format is for non-16x9, letterbox source and for users who use external 16x9 lens to display 2.35:1 aspect ratio using full resolution. Native: This format displays the original image without any scaling. AUTO: Automatically selects the appropriate display format. 16:10 Screen 480i/p576i/p 1080i/p 720pPC 4:3 1066 x 800 center 16:10 1280 x 800 center LBX 1280 x 960 center, then get the central 1280 x 800 image to display Native 1:1 mapping centered. 1:1 map- ping (960 x 540) display 1280 x 720 1280 x 720 center 1:1 mapping centered. 16:9 Screen 480i/p576i/p 1080i/p 720pPC 4:3 960 x 720 center 16:9 1280 x 720 center LBX 1280 x 960 center, then get the central 1280 x 720 image to display Native 1:1 mapping centered. 1:1 map- ping (960 x 540) display 1280 x 720 1280 x 720 center 1:1 mapping centered. 16:9 or 16:10 depend on “Screen Type” setting.
33English User Controls Each I/O has different setting of “Overscan”. “Overscan” and “Zoom” can’t work at same time. Overscan Overscan function removes the noise in a video image. Overscan the image to remove video encoding noise on the edge of video source. Zoom Press the to reduce the size of an image. Press the to magnify an image on the projection screen. H Image Shift Shift the projected image position horizontally. V Image Shift Shift the projected image position vertically. V Keystone Press the or to adjust image distortion vertically. If the image looks trapezoidal, this option can help make the image rectangular . Auto Keystone Automatically adjusts vertical image distortion.
34 English User Controls 3D Choose the “On” to turn this item on first if for 3D images. 3D Sync. Invert Press the “On” to invert left and right frame contents. Press the “Off” for default frame contents. “3D Sync Invert” only available when 3D is enabled. Compatible 3D source, 3D content and active shutter glasses are required for 3D viewing. DISPLAY | 3D
35English User Controls SETUP Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language. Press “Enter” to finalize the selection. Projection Front-Desktop This is the default selection. The image is projected straight on the screen. Rear-Desktop When selected, the image will appear reversed. Front-Ceiling When selected, the image will turn upside down. Rear-Desktop and Rear-Ceiling are to be used with a translucent screen.
36 English User Controls Rear-Ceiling When selected, the image will appear reversed in upside down position. Menu Location Choose the menu location on the display screen. Screen Type Choose the screen type from16:10 or 16:9. Projector ID ID definition can be set up by menu (range 0~99), and allow user control an individual projector by RS232. Refer to page 58~61 for the complete list of RS232 commands. Mute Choose the “On” to turn mute on. Choose the “Off” to turn mute off. “Screen Type” is for WXGA only.
37English User Controls SETUP Volume Press the to decrease the volume. Press the to increase the volume. Audio Input The default audio settings are on the back panel of the projector. Use this option to reassign any of the Audio Inputs (1 or 2) to the current image source. Each Audio input can be assigned to more than one video source. Audio 1: VGA 1 and VGA 2. Audio 2: S-Video/Video. MIC: (No default video source) RS232 RS232: Allow RS232 control of an individual projector. (Default setting) Network: Allow projector control via web browser (Internet Explorer) using the network. Volume adjustment can also control MIC volume.
38 English User Controls SETUP | Signal (RGB) Automatic Automatically selects the singal. If you use this function, the Phase, frequency items are grayed out, and if Signal is not auto - matic, the phase, frequency items will appear for user to manually tune and saved in settings after that for next time projector turns off and on again. Phase Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or flickers, use this function to correct it. Frequency Change the display data frequency to match the frequency of your computer’s graphic card. Use this function only if the image appears to flicker vertically. H. Position Press the to move the image left. Press the to move the image right. V. Position Press the to move the image down. Press the to move the image up. “Signal” is only supported in Analog VGA (RGB) signal.
39English User Controls SETUP | Security Security On: Choose “On” to use security verification when the turning on the projector. Off: Choose “Off” to be able to switch on the projector without password verification. Security Timer Use this function to set the how long (Month/Day/Hour) the projector can be used. Once this time has elapsed you will be requested to enter your password again. Change Password First time: 1. Press “ ” to set the password. 2. The password has to be 4 digits. 3. Use number button on the remote to enter your new password and then press “ ” key to confirm your password. Change Password: 1. Press “ ” to input old password. 2. Use number button to enter current password and then press “ ” to confirm. 3. Enter new password (4 digits in length) using the number buttons on the remote, then press “ ” to confirm. 4. Enter new password again and press “ ” to confirm. Password default value is “1234” (first time).
40 English User Controls If the incorrect password is entered 3 times, the projector will automatically shut down. If you have forgotten your password, please contact your local office for support.