Optoma Tw1692 Projector User Manual

English
Using the Remote Control
Brightness Adjust the brightness of the image.
MenuPress 
Menu to launch the on-screen 
display  (OSD)  menu.  To  exit  OSD, 
Press Menu again.
Zoom Press +/- to zoom in of an image.
HDMI Press 
HDMI  to  choose  HDMI 
source.
Freeze Press Freeze  to pause the screen image.
AV Mute Momentarily turns off/on the audio 
and video.
S-Video Press 
S-Video  to  choose  S-Video 
source.
VGA Press 
VGA  to  choose  source  from 
VGA- IN connector.
Video Press  Video...

English
On-screen Display Menus
The  Projector  has  multilingual  On-screen  Display  menus  that  allow  you  to 
make image adjustments and change a variety of settings. The projector will 
automatically detect the source.
How to operate
1.  To  open  the  OSD  menu,  press Menu  on  the  Remote  Control  or 
Projector Keypad.
2.  When  OSD  is  displayed,  use  ◄►  keys  to  select  any  item  in  the  main menu. While making a selection on a particular page, press 
▼ or Enter to enter sub...

English
Menu Tree
User Controls 

English
Image
Display Mode
There are many factory presets optimized for various types of images.
4 Presentation: Good color and brightness from PC input.
4 Bright: Maximum brightness from PC input.
4 Movie: For home theater.
4 sRGB: Standardised accurate color.
4 User1: User’s own settings.
4 User2: User’s own settings.
The initial default settings of this mode is from Movie mode. Any further  
adjustments by the user in User1/2 will be saved in this mode for future use.
Brightness
Adjust the...

English
Image
Saturation
Adjusts a video image from black and white to full color saturation.
4 Press ◄ to decrease the amount of saturation in the image.
4 Press ► to increase the amount of saturation in the image.
Tint
Adjusts the color balance of red and green.
4 Press ◄ to increase the amount of green in the image.
4 Press ► to increase the amount of red in the image.
Color Setting
Enter the Color Setting menu. Select the Red/Green/Blue Gain for  
brightness adjustments and Bias for...

English
Image | Color Setting
Gain
Set RGB Gain to adjust the Brightness of the follow in Colors:
4 Red—increase or decrease the gain value for red.
4 Green—increase or decrease the gain value for green.
4 Blue—increase or decrease the gain value for blue.
Bias
Set RGB Bias to adjust the Contrast of the follow in Colors:
4 Red—increase or decrease the bias value for red.
4 Green—increase or decrease the bias value for green.
4 Blue—increase or decrease the bias value for blue.
Color
Set values...

English
Image | Advanced
Brilliant Color
This adjustable item utilizes a new color-processing algorithm and  
system level enhancements to enable higher brightness while providing 
true, more vibrant colors in picture. The range is from 0 to 10. If you  
prefer a stronger enhanced image, adjust toward the maximum setting. 
For a smoother, more natural image, adjust toward the minimum setting.
Degamma
This  allows  you  to  choose  a  degamma  table  that  has  been  fine-tuned  to 
bring out...

English
Image | Advanced | Input Source
Input Source
Use  this  option  to  enable  /  disable  input  sources.  Press  ◄  or  ►  into  the 
next menu as below and then use ▲ or ▼ to select. Press Enter to finalize 
the selection. The projector will not search inputs that are de-selected\
.
v If all sources  are deselected, 
the projector 
cannot display 
any images. 
Always leave at 
least one source 
selected.
User Controls 

English
Display
Format
Use this function to choose your desired aspect ratio.
4 4:3: This format is for 4x3 input sources not enhanced for Wide screen TV.
4 16:9 I (XGA series)/16:9 (WXGA series): This format is for 16x9 inp\
ut sources, like HDTV and DVD enhanced for Wide screen TV.
4 16:9 II (XGA series)/16:10 (WXGA series): The non-standard  wide-screen display format of the projector. Part of the original image \
will be cut if the image aspect ratio is less than 1.67:1.
4 Native: Depends...

English0
Display
Overscan
Overscan function removes the noise in a video image. Overscan the  
image to remove video encoding noise on the edge of video source.
Zoom4
 Press ◄ to reduce the size of the image.
4 Press ► to magnify an image on the projected screen.
H Image Shift
Shifts the projected image position horizontally.
4 Press ◄ to move the image left on the projected screen.
4 Press ► to move the image right on the projected screen.
V Image Shift (16:9 only)
Shifts the projected image...