Optoma Tl50w Projector User Manual

							1111
Viewing Photos from the Internal Memory, SD Card, or USB Flash Drive
hoW t o vIe W ph o t o S - So u r c e: In t e r n a l me m o r y / SD ca rD / uSB fl aSh Dr Iv e
If an SD card is inserted, the content of the 
memory card is read first. If you want to read 
data from the internal memory or USB flash 
drive, press 
 in the appropriate screen to 
change the data source. See steps below.
Slideshow at Full Screen mode  (see page 12))
The displayed screen may vary depending on  the selected data source on the previous step.
1/2
1/2
1/2
Start playback
Change data  source
Change data source
Change data source
1/2
Home menu
1/2
1. Select "Photo"
2. Enter "Photo" Menu
The screen, the source icon on the button guide, 
and the sequence in which screens appear vary 
depending on the available data source.
3. Select Data Source
4. Browse Thumbnails5. Preview File
Return Home 
Menu   
						

							1212
Ho w t o Vi e w PHo t o s - Mo d e: sl i d e s Ho w a t Fu l l sc r e e n
During slideshow, photos are played continuously at a specified interval time while playing music stored in the internal memory as background.
 To change slideshow interval settings and 
• 
enable/disable background music, see 
Slideshow Settings below.
Make sure that background music setting is 
• 
"On" to enable this feature.
Save the music files (*.mp3 format) under 
• 
the "/mnt/disk/bgm" folder in the internal 
memory via data transfer function.
Only music files stored in the internal 
• 
memory "/mnt/disk/bgm" folder can be played as background music.
 The button guide disappears when the 
keypad is not used for 3 seconds.To display the button guide, press any key.
Timer
Timer: 2-second 
interval
Timer: 5-second 
interval
Timer: 10-second 
interval
Music
Background music 
on
Background music 
off
sl i d e s Ho w se t t i n g s
Home menu
1. 
Select "Setup"2. Enter "Setup" Menu3. Select "Slideshow"
6. Select Option5. Select Setting4. Enter "Slideshow" Menu
Media Playback Control
Increase volume + Slideshow on
Decrease volume + Slideshow off
Highlight this icon and  
 press 
to exit  
 slideshow mode.   
						

							1313
Viewing Documents from the Internal Memory, SD Card, or USB Flash Drive
hoW t o vIe W Do c u m e n t S - So u r c e: In t e r n a l me m o r y / SD ca rD / uSB fl aSh Dr Iv e
If an SD card is inserted, the content of the 
memory card is read first. If you want to read 
data from the internal memory or USB flash 
drive, press 
 in the appropriate screen to 
change the data source. See steps below.
Open document
Report
View mode  (see page 14)
travel.doc 128 KB
165 KB 143 KB
1,211 KB
..
travel.doc
128 KB
165 KB 143 KB
1,211 KB
..
travel.doc
128 KB
165 KB 143 KB
1,211 KB
..
Change data 
source
Change data source
travel.doc 128 KB
165 KB 143 KB
1,211 KB
..
Change data 
source
travel.doc 128 KB
165 KB 143 KB
1,211 KB
..
Home menu
1. 
Select "Office Viewer"
2. Enter "Office Viewer" Menu
The screen, the source icon on the button guide, 
and the sequence in which screens appear vary 
depending on the available data source.
3.  Select Data Source
4. Select File5. View File
Return Home 
Menu   
						

							14
Media Playback Control
Previous pageZoom in/out page
Next pageEnter advanced menu 
mode
Return	to	file	list
Media Playback Control (Advanced Menu Mode)
Page upMove to the left
Page downExit advanced menu 
mode
Move to the right
or
14
hoW t o vIe W Do c u m e n t S - vIe W mo De
Report

The button guide disappears when the 
keypad is not used for 3 seconds.To display the button guide, press any key .
Report
Se l e c t me n u la n g u a g e
Select your preferred menu language:
English
French
SpanishPortuguese (Brazilian)
GermanItalianRussianPolish
Dutch Swedish
Greek
Traditional Chinese Simplified	Chinese
Korean
Japanese
Advanced menu mode
Full screen view
Select item
Home menu
Confirm	selection
1.  Select "Setup"2. Enter "Setup" Menu3. Select "System"
6. Select Language5. Enter "Language" Menu4. Enter "System" Menu   
						

							1515
vIe W pr o j e c t o r In f o r m a t Io n
SD card capacity
Internal memory capacity
Home menu
3. 
Select "System"
4. Enter "System" Menu
1. Select "Setup"2. Enter "Setup" Menu3. Select "System"
6. Enter "information" Menu5. Select "information"4. Enter "System" Menu
7. View Projector information   
						

							1616
reSe t t h e SySt e m

When	the	system	is	reset,	all	files	stored	in	
the internal memory will be deleted. Ensure all	files	are	backed	up	before	resetting.
Yes
Reboot the projector
Select item
Home menu Return to
No
Home menu
1. 
Select "Setup"2. Enter "Setup" Menu3. Select "System"
6. Enter "Reset" Menu5. Select "Reset"4. Enter "System" Menu
7. Confirm Reset
8. Wait to Complete   
						

							1717
up g r aDe fIr m Wa r e
Software updates can be obtained from the OPTOMA website  
(www.optoma.com / www.optoma.eu /www.optoma.com.tw).
1.  On your computer, create a folder named "upgrade".
2.	 Download	the	latest	firmware	from	www.optoma.com  and save it in the "upgrade" folder.
3.   Copy the "upgrade" folder to the root folder of the SD card.
4.  Insert the SD card into the SD card slot of the projector.
5.   Follow the steps below.

A	"No	new	firmware	is	found"	message	
• 
appears	if	there	is	no	update	file	in	the	
SD card.
Do not touch any buttons or turn off the 
• 
projector while upgrading is in progress. 
Otherwise, this may damage the 
projector.
Do not remove the SD card until the 
• 
upgrade is complete.
Upgrade may take a while   
to complete
Select item
Home menuReturn to
No
Reboot the projector
Yes
Home menu
1.  Select "Setup"2. Enter "Setup" Menu3. Select "System"
6. Enter "Upgrade" Menu5. Select "Upgrade"4. Enter "System" Menu
7. Confirm Upgrade8. Wait to Complete   
						

							1818
uSB moDe
USB Display Mode
Data Transfer Mode
Home menu
When data transfer completes,  unplug the USB cable or press   
 to exit PC mode.
Press   
to exit USB 
display mode.
Prepare DOUSB...
Home menu
1.  Select "mini-USB"2. Enter "mini-USB" Menu3. Enter "USB Display" Mode
5. View PC Display4. Connect to PC
1. Select "mini-USB"2. Enter "mini-USB" Menu3. Select "Data Transfer"
5. Connect to PC4. Enter "Data Transfer" Mode6. Start Transfer Data

When	using	USB	Display	function	for	the	first	time:	
1. From the Windows desktop, browse for "USB Display V1.0.1" drive and d\
ouble-click "dlusb_launcher.exe", see "Data Transfer Mode" below.2. USB display is not MAC compatible.   
						

							1919
aDj u St me n u Se t t In g S f o r ex t e r n a l In p u t So u r c e: vga  / co m p o S It e av / hDmI
Selecting Input Source 
TM
Once a video source device is connected 
and turned on, press
 to switch input 
source.
Menu Items
Screen menu
Picture menu
Setting menu
Options menu
Menu Operation
Select main 
menuEnter current 
submenu
Hide OSD 
menu
Submenu Operation
Move upAdjust 
settingMove down
Confirm	
selection
Entering Menu Mode 
Press   to enter the menu 
mode.   
						

							2020
ex t e r n a l In p u t Se t tIn g
Picture Menu
Color Mode (Bright / PC / Movie / Picture / User)
Adjust setting
Hue (0~100)
Submenu Option
Gamma 0~2
BrilliantColor
TM0~10
Color Temp. Low / Middle / High
Color Space Auto / RGB / YUB
input HDMI / VGA / COMPOSITE / 
S-Video / SD_CARD / USB_A / 
Mini USB_B
Wall Color (White / Light Yellow / Light Blue / Pink / Dark Setting)
Adjust setting
Brightness (0~100)
Adjust setting
Contrast (0~100)
Adjust setting
Sharpness (0~100)
Adjust setting
Saturation (0~100)
Adjust setting
Adjust setting
Advanced 
Adjust setting
Select item
Confirm	
selection / setting
1.  Select Submenu
2. Enter Submenu
3. Adjust Settings
4. Confirm Settings