Optoma Th7500 Nl Projector User Manual

11English
Installation
Connecting the Projector
Install the Projection Lens
1
2
5
	Before install or replacing the lens, switch off the power to the projector  	Avoid using the remote control or projector keypad button to adjust the lens shift or zoom/focus while the lens attachment process is carried out.
Install Lens Procedure:
1. Unscrew the 2 screws and lift up the lens door. 1
2. Remove the projector cap. 2
3. Push the release lever up to release the lock. 3
4. Remove the lens cap. 4
5. Push the...

12English
Installation
12V OUTRS232
R
G BH V
S-VIDEO
VIDEO YPb Pr
RJ45 HDMI 2HDMI 1
VGA-OUT VGA
 2-IN VGA 1-IN
SOURCEINFO .MENU
AV MUTE ENTER
RE-SYNC
LENS
SHIFT
FOCUS
ZOOM
E62405SPR
Connect to Computer/Notebook
1
543
1....................................................................................................Power Cord2.................................................................................................RS232...

13English
Installation
12V OUTRS232
R
G BH V
S-VIDEO
VIDEO YPb Pr
RJ45 HDMI 2HDMI 1
VGA-OUT VGA
 2-IN VGA 1-IN
SOURCEINFO .MENU
AV MUTE ENTER
RE-SYNC
LENS
SHIFT
FOCUS
ZOOM
E62405SPR
Connect to Video Sources
1....................................................................................................Power Cord2...................................................................................................*BNC Cable3.............................................................................*3...

14English
Installation
12V OUTRS232
R
G BH V
S-VIDEO
VIDEO YPb Pr
RJ45 HDMI 2HDMI 1
VGA-OUT VGA
 2-IN VGA 1-IN
SOURCE
INFO.MENU
AV MUTE ENTER
RE-SYNC
LENS
SHIFT
FOCUS
ZOOM
Powering the projector On / Off
	Turn on the projector first and then select the signal sources.
Powering On the Projector
1.  Remove the projector cap. 1
2. Securely connect the power cord and signal cable. Power on 
the switch 2 and the Power LED flashes Red.
3. Turn on the lamp by pressing “” button either on the rear 
of the...

15English
Installation
Powering off the Projector
1.  Press the “” button on the remote control or press the “
” button on the control panel to turn off the projector. 4 
The following message will be displayed on the screen. 
  Press the “” button on the remote control or press the “
” button on the control panel again 4 to confirm otherwise 
the message will disappear after 15 seconds. When you 
pressing for the second time, the projector will shut down.
2.  The cooling fans continue to operate for...

16English
Installation
	Contact the nearest service center if the projector displays these symptoms. See pages 67-68 for more information.
Warning Indicator
When the warning indicators (see below) come on, 
the projector will automatically shutdown: 
 “LAMP1” or “LAMP2” LED indicator is lit red and if  
“POWER” LED indicator flashes red.
 “TEMP” LED indicator is lit red and if “POWER” LED  
indicator flashes red. This indicates the projector has 
overheated. Under normal conditions, the projector can...

17English
Installation
Adjusting the Projected Image
Adjusting the Projector’s Height 
The projector is equipped with elevator feet for adjusting 
the image height.
1. Locate the adjustable foot you wish to modify on the 
underside of the projector. 
2. Rotate the adjustable ring clockwise to raise the projector 
or counter clockwise to lower it. Repeat with the remaining 
feet as needed.
Tilt-Adjustment Feet
Tilt-Adjustment Ring 

18English
Installation
Adjusting the Projector’s Position
To determine where to position the projector, consider the size 
and shape of your screen, the location of your power outlets, 
and the distance between the projector and the rest of your 
equipment. Example: 
 ST1 Lens: The projector will focus at distances from 3.08 to 
68.6 feet (0.94 to 20.9 meters).
10%W10%W
60%H
20%H
Width(W)
Height (H)     

19English
Installation
 This table is for user’s reference only.
Optoma Model NameWT1WT2ST1TZ1TZ2
Focal Length (f) (mm)11.7318.1~21.7221.5~28.728.6~54.3354.06~102.7
F number2.22.2-3.332.0-3.02.2-3.02.3~3.16
Zoom Range (Ratio)Fixed1.2x1.33x1.9x1.9x
Zoom & Focus Adjust-mentMotorized
Throw Ratio0.771.2~1.451.45~1.941.94~3.673.67~6.98
Throw Distance (m)0.5~8.30.78~15.60.94~20.91.25~39.52.37~75.2
Throw Distance (feet)1.64~27.232.56~51.183.08~68.574.10~129.597.78~246.72
Projection Image Size30”~500” inches...

20English
User Controls
Using the Control Panel
PowerRefer to the “Power On/Off the Projector” section on 
pages 14-15.
SOURCEPress “SOURCE” to select an input signal.
RE-SYNCAutomatically synchronize the projector to the input 
source.
LENS SHIFTAdjust Lens shift up/down/left/right
InformationDisplay the projection’s information.
AV MUTEMomentarily turns off/on the audio and video.
MENUPress “Menu” to launch the on-screen display 
(OSD) menu. To exit OSD, Press “Menu” again.
Four Directional 
Select...