Optoma Projector Th1060p User Manual

English

Appendices
 LED states
 On Screen Messages
		Fan failed: 
  The projector will switch off automatically.
 
	 	Over temperature: 
  The projector will switch off automatically.
 
	 	Replacing the lamp: 
  Lamp is approaching the end of its rated life. 
  Replacement suggested.
	
Remote Control
	If the remote control does not work
	 	
 Check the operating angle of the remote control is within ±15° both 
horizontally and vertically of on of the IR receivers on the projector.
		  Make...


Appendices
Replacing the Lamp
The projector automatically detects the lamp life.  When the lamp life is nearing the end of use, you will receive a warning message.
When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before changing the lamp.
	
Warning: Lamp compartment is hot!  Allow it to cool down before 
changing lamp!
Warning: To reduce the risk of...

English

Appendices
4
1
2
3       


Appendices
5
Lamp Replacing Procedure: 
1.    Switch off the power to the projector by pressing the Power button.
2.    Allow the projector to cool down at least 30 minutes. 
3.    Disconnect the power cord.
4.    Open the screw cover.  
5.    Remove the single screw on the lamp compartment cover.  
6.    Remove the lamp compartment cover.  
7.     Remove the three screws from the lamp module.  
Lift the module handle up.  
8.     Pull firmly on the module handle to remove the lamp module....

English

Appendices
Compatibility Modes
Signal ResolutionH-SYNC 
( KHz ) V-SYNC 
( Hz ) COMPOSITE 
S_VIDEO COMPONENT RGB 
(Analog) DVI 
(Digital)
NTSC15.734 60.0 
PAL/SECAM15.625 50.0 
VESA 720 x 400 37.9 85.0

 
640 x 480 31.5 60.0  
640 x 480 37.9 72.8  
640 x 480 37.5 75.0  
640 x 480 43.3 85.0  
800 x 600 35.2 56.3  
800 x 600 37.9 60.3  
800 x 600 46.9 75.0  
800 x 600 48.1 72.2  
800 x 600 53.7 85.1  
1024 x 768 48.4 60.0  
1024 x 768...


Appendices
RS232 Commands and Protocol 
Function List
Pin no.Name I/O (From Projector Side)
1 NC __
2 RXD IN
3
TXDOUT
4 NC __
5 NC __
6 NC __
7 RS232 RTS
8 RS232 CTS
9 NC __
RS232 Pin Assignments (projector side)
315
69      

English

Appendices
RS232 Protocol Function List(+56&RPPDQG7DEOH
%DXG5DWH  
DWD%LWV   
3DULW\1RQH  
6WRS%LWV
)ORZ&RQWURO1RQH 
8$57),)2LVDEOH   
3URMHFWR U

5HWXUQ3DVV3
3URMHFWRU5HWXUQ)DLO)  ...

48
Appendices
ItemKey DefinitionASCIIPassFail18 Volume +n=18 
PF19 DVI-D/YPbPr/1 n=19 
PF02=n
2/uneM02  
PF12=n
3/mooZ12  
PFF
P
22=n
4/IMDH2223 Freeze/5 n=23 
PF24 AV Mute/6 n=24 
PF25 S-Video/7 n=25 
PF62=n
8/AGV62  
PF72=n
9/oediV72  
PF
OSD/Image/Display/Setup
Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values\Menu ItemsRS232
Command Code
   Presentation ~XX20 1   Bright ~XX20 2   Movie ~XX20 3   sRGB ~XX20 4   Classroom ~XX20 7Blackboard ~XX20 8User 1 ~XX20 5
Display Mode (1)
User 2 ~XX20 6...

English
49
Appendices
 
 
Main Menu  Sub Menu  Sub Menu 2  Sub Menu 3  Sub Menu 4  Values\Menu Items
RS232  
Command Code
Reset (2a)   ~XX33 1  
Exit (2a)   NA 
 
  RGB  ~XX37 2  
  YUV  ~XX37 3 Color Space 
   Auto  ~XX37 1 
  Normal    
 Red     Green   RGB Channel 
  Blue   
 
Exit     NA   
Exit (2)         NA 
   
   
  4:3  ~XX60 1    
   
  16:9  ~XX60 2         LBX  ~XX60 5 Format (1) 
       Native  ~XX60 6 
Digital Zoom (1)       0~10  ~XX61 n V Image Shift (1)       -50~+50  ~XX64 n V Keystone...

50
Appendices
Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values\Menu ItemsRS232
Command Code
   ECO ~XX114 1Power Mode
(Standby)   Active  ~XX114 2 
~XX114 0 
On 
~XX80 1Mute 
Off ~XX80 2
~XX80 0
Volume
  0~10 ~XX81 nMini  ~XX89 1Audio Input 
RCA 
~XX89 2
Audio Settings
Exit 
 NA 
Projector ID 00~99 
~XX79 nRS232 ~XX86 1RS232
Network ~XX86 2
Network State 
   DHCP    IP Address     ksaMtenbuS     yawetaG     SND    
ylppA   
Network (1)
AN
tixE
    English ~XX70 1    German ~XX70 2    French...