Optoma Projector Pk320 User Manual

							1111
Viewing Photos from the Internal Memory, MicroSD Card, or External Source
hoW to vIeW photoS - Source: Internal memory / uSB flaSh DrIve / mIcroSD carD / external Source
If an external source (USB) is inserted, the external memory is read first. If you want to read data from the microSD card or internal memory, press  in the appropriate screen to change the data source. See steps below.
Full Screen mode (see page 12)
Photo
ExternalMemory
1/2
Photo
MicroSD Card
1/2
Photo
Internal
Memory
1/2
Change data source
Change data source
Change data source
Photo
Internal
Memory
2/2
Page indicator
Photo
Internal
Memory
1/2
The displayed screen may vary depending on the selected data source on the previous step.
1. Select "Photo"
2. Select Data Source
3. Select Page
4. Enter Current Page
or
5. Browse Thumbnails
6. Preview File
The screen, the source icon on the button guide, and the sequence in which screens appear vary depending on the available data source. If the external source or microSD card is not inserted, its screen is skipped when  is pressed and the source icon on the button guide is not shown.    
						

							1212
hoW to vIeW photoS - full Screen moDe
In Slideshow mode, photos are played continuously at a specified interval time while playing music stored in the internal memory as background.
• Make sure that background music setting is "On" to enable this feature.• Save the music files (*.mp3 format) under the "Slideshow Music" folder in the internal memory.• Only music files stored in the internal memory "Slideshow Music" folder can be played as background music.
To change slideshow interval settings and enable/disable background music, see Slideshow Settings below.
Play slideshow 
Next photo 
Previous photo Return to Home menu 
Rotate 90°  counter-clockwise 
Rotate 90° clockwise 
Full screen modeSlideshow mode
Photo
Internal
Memory
1/2
Exit slideshow
The button guide disappears when the keypad is not used for 3 seconds.To display the button guide, press any key except  or .
Pause/Play slideshow 
Next photo 
Previous photo Return to Home menu 
Volume down 
Volume up 
Exit slideshow 
hoW to vIeW photoS - SlIDeShoW moDe
1. Enter Slideshow Mode2. View Slideshow3. Exit Slideshow Mode     
						

							13
Timer: 2-second 
interval
Timer: 5-second 
interval
Timer: 10-second 
interval
Background music on
Background music off
Video Setting Music Setting Back
Display Setting SlideshowSystem
Setup
13
Sl i d eSh o w Se t t i n g S
1. 
Select "Setup"2. Select "Slideshow"3. Adjust Settings
Co m p a t i b i l i t y: ph o t o
Compatible Photo FormatFile Format File Extension
BMP JPG
JPEG *.bmp, 
*.jpg 
*.jpeg The projector supports the following photo 
resolution: Bitmap file up to 2M (megapixels) each
• 
Jpeg file up to 10M (megapixels) each
• 
If a photo resolution is over these 
limitations, the file will not be shown in the 
file directory screen. For optimum display performance of 
static photos or slide show playback, it is 
recommended to use smaller file size and 
lower resolution photos.   
						

							1414
Viewing Documents from the Internal Memory, MicroSD Card, or External Source
hoW to vIeW DocumentS - Source: Internal memory / uSB flaSh DrIve / mIcroSD carD / external Source
compatIBIlIty: Document
The projector uses Picsel File Viewer to open and view Microsoft® Word files and Adobe® PDF files.
Supported Versions
VersionMicrosoft® Office 95 Microsoft® Office 97Microsoft® Office 2000Microsoft® Office 2003Microsoft® Office 2007Microsoft® Office 2010Adobe® PDF 1.0 ~ 1.4
•  Office Viewer supports embedded fonts in Adobe®PDF documents but not in Microsoft® Word documents.•  Embedded fonts are used in priority over the projector system fonts.
Compatible Document Format
File FormatFile Extension
Microsoft® Office Application  (Word, Excel, Power Point) Adobe® PDF
.doc.docx.ppt.pptx
.xls.xlsx.pdf
Font / Language Support
The projector has limited font support. When a document with unsupported font is opened, Office Viewer automatically substitutes the unsupported font with default system fonts. This may cause the document 
layout to look different.The projector supports one default font for each of the following languages.
JapaneseKoreanPolishIberian PortugueseRussianSpanishSwedishThaiTurkishVientameseTraditional ChineseSimplified ChineseArabicAlbanianBrazilian Portuguese
BulgarianCroatianEstonianFinnishGreekSlovenianSerbianLatvianLithuanianMacedonianNorwegianRomanianLatin American (Español)SlovakianIndonesian
If an external source (USB) is inserted, the external memory is read first. If you want to read data from the microSD card or internal memory, press  in the appropriate screen to change the data source. See steps below.
Office ViewerExternalMemory
1/1Summer.doc 128 KB
Rainbow.ptt 1,211 KB
Blue.xls 143 KB
Cat.doc 165 KB
Black Sheep.doc 256 KB
Office ViewerMicroSD
Card
1/1Summer.doc 128 KB
Rainbow.ptt 1,211 KB
Blue.xls 143 KB
Cat.doc 165 KB
Black Sheep.doc 256 KB
Office ViewerInternal
Memory
1/1Summer.doc 128 KB
Rainbow.ptt 1,211 KB
Blue.xls 143 KB
Cat.doc 165 KB
Black Sheep.doc 256 KB
Change data source
Change data source
Change data source
FO C
US
View mode (see page 14)
The displayed screen may vary depending on the selected data source on the previous step.
Office ViewerInternal
Memory
1/1Summer.doc 128 KB
Rainbow.ptt 1,211 KB
Blue.xls 143 KB
Cat.doc 165 KB
Black Sheep.doc 256 KB
1. Select "Office Viewer"
2. Select Data Source
3. Select File
4.  View File
or
The screen, the source icon on the button guide, and the sequence in which screens appear vary depending on the available data source. If the external source or microSD card is not inserted, its screen is skipped when  is pressed and the source icon on the button guide is not shown.
Font / Language
CzechDanishDutchEnglish
FrenchGermanHungarianItalian     
						

							1515
hoW to vIeW DocumentS - vIeW moDe
LED ModeColor Mode Back
Aspect Ratio Gamma Projection
Display Setting
Video SettingMusic Setting Back
Display Setting Slideshow System
Setup
DISplay SettIngS
The button guide disappears when the keypad is not used for 3 seconds.To display the button guide, press any key except  or .
FO C
US
Zoom in 1x ~ 4x 
      
Pan up, down, left, right (in zoom mode)
Page up       Move right       
Move left        
Page down       Exit View mode  
Return to Home menu 
LED Mode: Movie  (available only when the  power adapter is plugged)LED Mode: Bright (available only when the  power adapter is plugged)
LED Mode: Standard
LED Mode: ECO
Color Mode: Extended
Color Mode: Standard
Gamma: Standard
Gamma: Presentation
Gamma: Bright
Gamma: Movie
Aspect Ratio: Auto
Aspect Ratio: 4:3
Aspect Ratio: 16:9
Projection: Front Desktop
Projection: Front Inverted
Projection: Rear Desktop
Projection: Rear Inverted
1. Select "Setup"2. Select "Display Setting"3. Adjust Settings     
						

							1616
Select menu language
LanguageInformation Back
Firmware Update Reset
System
Video SettingMusic Setting Back
Display Setting Slideshow System
Setup
Select your preferred menu language.  Options are: English, French, Spanish, Portuguese (Brazilian), German, Italian, Russian, Polish, Dutch, Swedish, Greek, Traditional Chinese, Simplified Chinese, Korean, Japanese
vIeW projector InformatIon
LanguageInformation Back
Firmware Update Reset
System
Video SettingMusic Setting Back
Display Setting Slideshow System
Setup
MicroSD card capacityInternal memory capacityExternal memory (USB) capacity
Battery charging
Power adapter connected
1. Select "Setup"2. Select "System"3.  Select "Language"
4. Select Language
1. Select "Setup"2. Select "System"3. Select "Information"
4. View Information5. Return to Home Menu
5. Confirm language / 
     Return to Home menu     
						

							1717
upgraDe fIrmWare
Language Information Back
Firmware Update Reset
System
Video Setting Music Setting Back
Display Setting Slideshow System
Setup
New firm ware 1. 2 found.  
Upgrade the firm ware?
Software updates can be obtained from the OPTOMA website  (www.optoma.com / www.optoma.eu /www.optoma.com.tw).
1.  On your computer, create a folder named "upgrade".2. Download the latest firmware from www.optoma.com and save it in the "upgrade" folder.3.  Copy the "upgrade" folder to the root folder of the microSD card.4. Insert the microSD card into the microSD card slot of the projector.5.  Follow the steps below.
Ye s
No
• Do not touch any buttons or turn off the projector while upgrading is in progress. Otherwise, this may damage the projector.• Do not remove the microSD card until the upgrade is complete.
A "No new firmware is found" message appears if there is no update file in the microSD card.
Upgrade may take a while  to complete, do not touch any keys
1. Select "Setup"2. Select "System"
4. Confirm Upgrade3. Select "Firmware Update"
6. Turn Off the Projector
5. Wait to Complete
When the screen below appears, update is complete. Press and hold the Power button for 6 seconds to turn off the projector
8. Turn On the Projector7. Remove the MicroSD Card    
						

							1818
reSet the SyStem
When the system is reset, all files stored in the internal memory will be deleted. Ensure all files are backed up before resetting.
Resetting the System by Reset Menu
LanguageInformation Back
Firmware Update Reset
System
Video SettingMusic Setting Back
Display Setting Slideshow System
Setup
Ye s
No
Reboot the projector
1. Select "Setup"2. Select "System"
4. Confirm Reset3. Select "Reset"    
						

							1919
hoW to uSe external Input Source: vga / compoSIte av / hDmI
Select Input Source
VG A
800 x 600 
or
Video VGA Back
HDMI
Input
Video
VGA
HDMI
Return to Home menu
The signal message box briefly appears on screen; its label varies depending on the selected input signal.
Display  button guide
Settings        
Volume up       
Hide button guide       
Aspect ratio        
Volume down       
Return to Home menu 
Display mode
To exit display mode
Ye sNo
If more than one external device is connected to the projector or the pr\
ojector cannot automatically detect the external device, you have to manually se\
lect the input source. To do this, perform the following steps.
Selecting Input Source Manually
1. Select "Input"2. Select Input Source
3. Enter Display Mode
4. Adjust Volume / Settings 
     View Source Content5. Exit Display Mode
Selecting Input Source 
When the projector is not in playing mode nor reading from an external s\
ource, the projector automatically detects once a video source device is connec\
ted and turned on. A message appears on screen.
VGA is detected
Change to  VGA?
10 Sec.
VG A
800 x 600 Ye s
No
Similar message appears when other external input sources are detected.
When multiple input source devices are connected at the same time, the last connected device will be detected.    
						

							2020
Adjusting Contrast Settings
Input Source SettIngS
Display mode
Display  button guide
16:9
AUTO
Scroll option
Scroll option
Scroll option
When no key is pressed within 10 seconds, the aspect ratio icon automatically disappears and its setting is applied.
Changing Aspect Ratio Settings
Display mode
Display  button guide
When no key is pressed within 10 seconds, the contrast icon automatically disappears and its setting is applied.
  
Exit contrast settings
Scroll other settings: Sharpness, Color, LED, Brightness
Return to Home menu
4:3
2. Select "Aspect Ratio"1. View Source Content
-
3. Scroll Aspect Ratio Setting
16:9
4:3
AUTO
4. Confirm Setting
1. View Source Content2. Select "Settings"3. Select "Contrast"
4. Adjust Setting