Optoma Projector Ml1000 User Manual

							Mo b i l e leD Pr o j e c t o r
Us e r’s Ma nUa l  
						

							2
  1. Do not block any ventilation openings. To ensure reliable operation of the projector and to protect from over heating, it is recommended to install the projector in a location that does not block ventilation. As an example, do not place the projector on a crowded coffee table, sofa, bed, etc. Do not put the projector in an enclosure such as a book case or a cabinet that restricts air flow.  2. Do not use the projector near water or moisture. To reduce the risk of fire and/or electric shock, do not expose the projector to rain or moisture.  3. Do not install near heat sources such as radiators, heaters, stoves or any other apparatus such as amplifiers that emits heat.  4. Do not use the projector in direct sunlight.  5. Do not use near any appliance generating a strong magnetic field.  6. Do not use the projector in areas susceptible to excessive dust and dirt.  7. Turn off the product before cleaning.  8. Disconnect the power cord if the product is not being used for a long period of time.9. Ensure that the ambient room temperature is within 5- 35°C.10. Relative Humidity is 5 - 35°C, 80% (Max.), non-condensing.11. Do not drop, throw or try to bend your product.12. May explode if disposed of in fire.13. Clean only with dry cloth.14. Only use attachments/accessories specified by the manufacturer.
15. Do not use the unit if it has been physically damaged or abused. Physical damage/abuse would be (but not limited to): ▀■ Unit has been dropped.▀■ Charger or plug has been damaged.▀■ Liquid has been spilled on to the projector. ▀■ Projector has been exposed to rain or moisture.▀■ Something has fallen in the projector or something is loose inside.Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please contact your local reseller or service center before you send the unit for repair.16.  Do not let objects or liquids enter the projector. They may touch dangerous voltage points and short out parts that could result in fire or electric shock.17. See projector enclosure for safety related markings.18. The unit should only be repaired by appropriate service personnel.19. Do not touch the projector for a long time while the projector is used.
Im p o r t a n t Sa f e t y InSt r u c t Io n
ey e Sa f e t y Wa r n In g SAvoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible.A stick or laser pointer is recommended to avoid the need for the user t\
o enter the beam.When projector is used in a classroom, adequately supervise students whe\
n they are asked to point out something on the screen. In order to minimize power, use room blinds to reduce ambient light leve\
ls.
CLASS 1 LED PRODUCT
This appendix lists the general notices of your Projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-tions, may cause harmful interference to radio communications. 
However, there is no guarantee that inter-ference will not occur in a particular instal-lation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the device and receiver. • Connect the device into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Caution Changes or modifications not expressly approved by the manufac-turer could void the user’s authority, which is granted by the Federal Communications Commission, to operate this device. 
Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-lowing two conditions:1.  this device may not cause harmful interference, and2.  this device must accept any interfer-ence received, including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003. Remarque à l’intention des utilisateurs canadiens Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries •  EMC Directive 2004/108/EC (including amendments) •  Low Voltage Directive 2006/95/EC•  R & TTE Directive 1999/5/EC (if product has RF function)
re g u l a t Io n & S a f e t y n o t Ic e SDI Sp o Sa l o f o l D el e c t r Ic a l & el e c t r o n Ic 
eq u Ip m e n t(Applicable throughout the European Union and other European countries \
with separate collection programs)
This symbol found on your product or on its packaging, indicates that th\
is product should not be treated as household waste when you wish to dispose of it. Instea\
d, it should be handed over to an applicable collection point for the recycling of elect\
rical and electronic equipment. By ensuring this product is disposed of correctly, you will h\
elp prevent potential negative consequences to the environment and human health, whi\
ch could otherwise be caused by inappropriate disposal of this product. The recyc\
ling of materials will help to conserve natural resources. 
This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authoriti\
es or dealer and ask for the correct method of disposal.
The requirements for the gloss of housing apply to peripheral devices us\
ed at the visual display workplace according to BildscharbV. Peripheral devices intended for use outside the visual display workplace can receive a GS-Mark if the scope is indicated in the User’s Manual as well as the certificate.
That means the following wording is possible in situations where the use\
 within the field of view is not intended and where sufficient hints are given in the User’s Manual for the avoidance of such situations to ensure t\
hat display work is not affected.
Wording in the certificate: “This device is not intended for use in the direct field of view at visual display workplaces. To avoid incommoding reflexions at visual display workplaces this device must not be placed in the direc\
t field of view.”
a.2.9.31 gl o S S o f h o u S In g o f p e r Ip h e r a l 
D e v Ic e S (15t h / 22 m e e t In g ag1 eK1):
tr a De m a r K S
• WOW HD, SRS and the  symbol are trademarks of SRS Labs, Inc. WOW HD technology is incorporated under license from SRS Labs, Inc.• WOW HD™ significantly improves the playback quality of audio, delivering a dynamic 3D entertainment experience with deep, rich bass and high frequency clarity for crisp detail.
2   
						

							3
pr oDu c t ov e r v Ie W
3
8918171510131416
2
3
765419
1
3
1112
2
18
20
2021
pr o Du c t ov e r v Ie W
Focus Dial11 Speaker21 Ventilation (outlet)31 Lens41 IR Receiver51 Touch Panel61 Power Button (71 )Kensington Lock81 AC Input91 SD Card Slot111 USB Type A Port (Memory 111 Stick/WiFi/HDD)
Micro USB Port121  
VGA Connector131 HDMI Connector141 Video In151 Audio / AV In161 Headphones Connector171 Ventilation (inlet)181 Ceiling Mount Holes191 Elevator Foot211 Screw Hole for Tripod211 
2
5
7
8
10
11
12
13
14
1
3
4
6
9
Remote Control
Hide Button11 Power Button21  
Up Button31 OK Button41  
Left Button51 Down Button61 HDMI Button71 Media Button81 Video Button91 LED Mode Button111 Right Button111 Volume Up Button121 VGA Button131 Volume Down Button141 
po W e r on / of f
1
11 Connect the power cord to the AC IN input jack on the rear of the projector 1 () 21  Insert the plug at the other end of the power cord into a power outlet1 ()The LED lights red in standby mode131   Press the Power button () to turn the projector on or off1 ()The LED turns green when the projector is turned on1
3
2Standard AccessoryPower cord11 VGA cable21 Remote control31 
The standard accessories may vary in each region due • to different applications1The inclusive power cord varies per region1• 
pa c Ka g e ov e r v Ie Wpa c Ka g e ov e r v Ie W
1
56
2
8
3
4
Optional AccessoryMicro USB to USB 41 Type-A cableCarrying case51 Video cable61 VGA to Component 71 cableHDMI cable81 
7           
						

							44
2
1
2
11  Connect a VGA / HDMI device using the appropriate cable1 (~)
21  
After powering on the projector, press direct source button on the remote or swipe left or right on the touch panel1
1
2TM
aDj u St pr o j e c t e D Im a g e heIg h taD j u St t h e pr o j e c t e D Im a g e
The projector is equipped with an elevator foot for adjusting the projec\
ted image height1
To adjust the height:Turn the elevator foot to adjust the projected image position to the desi\
red height1
Projection Distance  (A)Screen Size - Width (B)Screen Size - Height (C)Screen Diagonal  (D)Meterfeet(mm)(inch)(mm)(inch)(mm)(inch)0.50 1.64 360.0 14.2 220.0 8.7 42216.6 0.90 2.95640.0 25.2 400.0 15.7 75729.8 1.50 4.921070.0 42.1 670.0 26.4 126249.7 1.80 5.911290.0 50.8 800.0 31.5 151659.7 2.40 7.871710.0 67.3 1070.0 42.1 202279.6 3.00 9.842140.0 84.3 1340.0 52.8 252799.5 3.60 11.812570.0 101.2 1610.0 63.4 3033119.4 4.5014.763210.0126.42010.079.13790149.2
1
Adjust the focus () until the image is clear 1
co n n e c t in p u t So u r c e - vga / hDmI
After a few seconds, if there is no changes, the projector will automati\
cally adjust the image display via Auto Keystone function1 
or
HDMIVGAHDMIVGA
2
1
2
VGAHDMI
Apple Digital AV AdapterApple Digital AV AdapterApple Lightning AdapterApple Lightning Adapter
iPadiPadiPad 4iPad 4
iPhone 4/4SiPhone 4/4SiPhone 5iPhone 5
orMacBookMacBook
Mini Displayport to HDMIMini Displayport to VGA
or
ororor       
						

							55
mo u n t t h e pr o j e c t o r
The tripod and ceiling mount are optional accessories1 
InSe r t SD ca r D
InSe r t uSB fl a Sh Dr Iv e
L O CK
Insert an SD card into the slot with the gold contacts facing down1
To remove the SD card, push the card to • eject it from the slot1Do not remove the SD card while the • projector is projecting image from the card1 This can cause data loss or damage the card1Supports SD card size up to 32GB1• The SD card is not included in the • package1
Plug a USB flash drive into the USB Type A port at the back of projector 1
Support USB flash drive with FAT32 format.
co n n e c t co m p u t e r f o r uSe r ma n u a l
2
1
1    Connect a laptop or PC using the Micro USB to USB Type-A cable121 Turn on the projector 131 CD-ROM icon will appear on the laptop/PC screen141 Click CD-ROM icon and open User Manual1
11  Connect the AV input source1 (~)
21  
After powering on the projector, press direct source button on the remote or swipe left or right on the touch panel1
11 All other brand and product names are trademarks or registered trademarks of their respective companies1 21 The cables connecting the video output devices are not supplied, please contact the device vendor or Optoma131 iPod nano/iPod touch/iPhone/iPod classic (version 5 and above)41 Designed for iPod/iPhone/Mobile phone/PMP with TV out functions1 Using with devices with audio signal voltage > 113Vrms is not recommended1
1
2
1
2
or
For video and  audio input
Screw a standard tripod into the screw hole on the projector 1
Screw hole for tripod
*Standard Tripod
11   Place the projector upside down on a flat surface. 21 Line up the three mounting holes and use the three ceiling mount screws to secure the mount to the projector 1
Screw holes (M3x11) for ceiling mount
*Ceiling Mount
co n n e c t in p u t So u r c e - co m p oS It e av I n
TM
2
1
or   
						

							66
Submenu Items
hoW t o uSe t h e me n u
RC: Use•  /// to highlight the desired option and press  to confirm the selection1 TP: Swipe Left/Right/Up/Down to highlight the desired option and Tap / One Click to confirm the selection.Buttons functionality varies depending on the current mode1• 
Down Button
Right Button
 RC: Press /// to select the menu item that you want to access and press to enter the menu screen1TP: Swipe Up/Down/Left/Right to select the menu item that you want to ac\
cess and Tap / One Click to enter the menu screen1
Photo menuVideo menuOffice Viewer menu
Setup menu(HDMI, VGA, Video modes)
Home menu
Touch Panel (TP)Remote Control (RC)
Up Button
Left Button
OK Button
Tap it
Swipe Down
Swipe LeftSwipe Right
Swipe Up
Setup menu
Touch Pad Practice Guide
These screens will appear the first time for using the projector or Reset projector 1
SD Card/USB menu
WiFi DisplayHDMI
SD CardVGAAuto Searching
USBVideoSetup
InformationSleep TimerProjection
KeystoneLanguageDirect Power On
WiFi ChannelReset
MenuHomeHDMIVGAVideoVolumeAdvanced
File name
File name
File name
File name
File name
File name
File name
File name
File name
RIGHT
RIGHT
LEFT
LEFT
ENTER
File name
File name
File name
File name
File name
File name
File name
File name
File name
EnglishFrançaisEspañolItalianoPortuguêsDeutschNederlandsPolskiРусскийSvenskaΕλληνικάTürkçe繁體中文简体中文한국어日本語        
						

							77
hoW t o aDj u St vo l u m e - So u r c e: SD ca r D / uSB fl aSh Dr Iv e
ho W t o aDj u St vo l u m e - So u r c e: vga  / vI De o / hDmI
Press •  /  on the remote control or swipe Up/Down on the touch pad to adjust volume1     
						

							88
File nameFile nameFile nameFile nameFile nameFile nameFile nameFile name
File name
Show folder List
Playing Videos from the SD Card, or USB Flash Drive
hoW t o pl a y vI D e o S - So u r c e: SD ca rD / uSB fl aSh Dr Iv e
The displayed screen may vary depending on the selected data source on the previous step1
Video Playback mode (see page 8)
Start playback
Change data source
2. Select Video Menu
4. Playback File
The screen, the source icon on the button guide, and the sequence in which screens appear vary depending on the available data source1
1. Select Data Source
Back icon
RC: Press / to select the menu item1TP: Swipe Left/Right to select the menu item1
RC: Press /// to select the file list.TP: Swipe Up/Down/Left/Right to select the file list.
3. Select Video File
Menu bar
Menu Bar Control
 + Back + Video menu
 + To parent directory + Document menu
 + Photo menu
Change data source
Back icon
Change data source
Back icon
WiFi DisplayHDMI
SD CardVGAAuto Searching
USBVideoSetup
WiFi DisplayHDMI
SD CardVGAAuto Searching
USBVideoSetup         
						

							99
hoW t o pl a y vI D e o S - vI De o pl a y Ba c K moDe
The button guide disappears when the keypad is not used for 5 seconds1To display the button guide, press Enter key1Media Playback Control
 + Rewind2x, 4x, 8x, 16x, and 32x
 + Play Play Pause
 + Fast forward2x, 4x, 8x, 16x, and 32x
 + SettingAdvanced setting
 + Repeat  Repeat all Repeat one Repeat disabled
 + 
SRS SRS
Treble
Bass Off
Press / key to switch On / Off SRS1When switch off SRS, press / key to select Treble and Bass1 Press  to decrease the value and press  to increase the value1
 + Display mode Brigt mode Photo mode PC mode Cinema mode
 + Contrast and Brightness 
Brightness: Press / key to increase/decrease the brightness1Contrast: Press / to decrease/increase the contrast1
 + BackBack to parent menu
Setting Menu    
						

							1010
Viewing Photos from the SD Card, or USB Flash Drive
hoW t o vIe W ph o t o S - So u r c e: SD ca rD / uSB fl aSh Dr Iv e
The displayed screen may vary depending on the selected data source on the previous step1
Photo Review mode (see page 11)
Start playback
2. Select Photo Menu
4. Preview File
RC: Press /// to select the file list.TP: Swipe Left/Right/Up/Down to select the file list.
3. Browse Thumbnails
Menu bar
Change data source
The screen, the source icon on the button guide, and the sequence in which screens appear vary depending on the available data source1
1. Select Data Source
Change data source
Back icon
Change data source
Back icon
Show folder List
Back icon
RC: Press / to select the menu item1TP: Swipe Left/Right to select the menu item1
Menu Bar Control
 + Back + Video menu
 + To parent directory + Document menu
 + Photo menu
WiFi DisplayHDMI
SD CardVGAAuto Searching
USBVideoSetup
WiFi DisplayHDMI
SD CardVGAAuto Searching
USBVideoSetup