Optoma Projector Hd87 User Manual

English

User Controls
Image | Advanced 
| PureEngine
 PureDetail
PureDetail is an edge enhancement tool that better defines the 
edges in the projected image thus providing more perceived detail.
 PureColor
This adjustable item utilizes a new color-processing algorithm and 
enhancements to enable the picture’s vividness to be significantly 
increased. The range is from “0” to “5”.
 PureMotion
PureMotion uses sophisticated algorithms to ensure that the   
natural motion in the image is...


User Controls
 Format
Use this function to choose your desired aspect ratio.
 4:3: This format is for 4x3 input sources.
 16:9: This format is for 16x9 input sources, like HDTV and DVD 
enhanced for Widescreen TV.
 LBX: This format is for non-16x9, letterbox source and for users 
who use external anamorphic lens to display 2.35:1 aspect ratio 
using full resolution. 
Detail informations about LBX mode :
1.   Some Letter-Box DVDs are not enhanced for 16x9 TVs. In 
this situation, the image...

English

User Controls
 Native: This format displays the original image without any  
scaling.
  Overscan
Overscan function removes the noise in a video image. Overscan 
the image to remove video encoding noise on the edge of video 
source.
 Edge Mask
 Press the  to reduce the size of an image.
 Press the  to magnify an image on the projection screen.
 V Image Shift
Shift the projected image position vertically. 
 V Keystone
Press the  or  to adjust image distortion vertically and make a...


User Controls
“SuperWide” is Off“ 
as default.
How to use  
“SuperWide”
1.   Obtain a 2.0:1 aspect ratio screen
2.  Switch SuperWide ON
3.  
Align the projector image correctly on 
the screen
4.   Enjoy movies without black bars
NoteNote
 SuperWide
SuperWide is a feature that uses a special 2.0:1 aspect ratio 
screen enabling both 16:9 and 2.35:1 aspect ratio movies to be 
shown without black bars at the top and bottom of the screen
 Off: Your desired aspect ratio can be selected - 4:3,...

English
35
User Controls
	 Menu	Location
Choose	the	menu	location	on	the	display	screen.	
	 Lamp	Settings
Choose	this	menu	to	adjust	your	desired	lamp	setting.
	 Projection
			 Front-Projection
This	is	the	default	selection.	 The	image	is	projected	straight	on	
the	screen.
			 Rear-Desktop	
When	selected,	the	image	will	appear	reversed.
			 Front-Ceiling	
When	selected,	the	image	will	turn	upside	down.
			 Rear-Ceiling	
When	selected,	the	image	will	appear	reversed	in	upside	down	
position.
	 Test...


User Controls
 Startup Image
Select the screen to display during startup.
 12V OUT A
12V OUT A provides a standard DC voltage for motorized screens.
 12V OUT B
 Off: disables the OUT.
 On: enables the OUT and the programmable sub-menu. The 
sub-menu is accessed by selecting the ON option then   
pressing the ENTER button on the remote control. Checking an 
option in the sub-menu will activate the OUT when the selected 
display mode is selected. In the example below 16:9 has been 
selected –...

English
37
User Controls
	Auto235:	When	 AUTO235 	is	enabled	the	projector	will	 	
automatically	
detect	when	a	2.35:1	ratio	presentation	is	being	
shown	and	will	activate	the	trigger	on	this	port	which,	in	turn,	
can	be	used	to	activate	a	motorised	anamorphic	lens	 	
assembly.

	 The	 AUTO235	setting	and	a	motorized	anamorphic	
lens	assembly	can	be	used	in	this	way	to	provide	a	fully	 	
automated	

“Constant	Height”	projection	system.
	 Lens	 Type
Used to set the lens type that has been fitted. This is...


User Controls
 Lamp Hour
Display the cumulative lamp operating time.
 Lamp Reminder
Choose this function to show or to hide the warning message 
when the changing lamp message is displayed. The message will 
appear up 30 hours before suggested replacement of lamp.
 Brightness Mode
Choose “Bright” to increase the lamp brightness. Choose “STD” to 
return to normal mode.
 Lamp Reset
Reset the lamp life hour after replacing the lamp.
System | Lamp 
Settings      

English
39
User Controls
	 Image
Select	the	screen	to	display	during	startup.
	Default	—	the	supplied	default	startup	screen.
	User	—	customized	screen	capture	using	the	Image	Capture	
function.
	 Image	Capture
Capture	a	displayed	screen	to	use	as	the	startup	screen.
1.	Display	the	desired	screen	on	the	projector.
2.	Select	Image	Capture	from	the	Advanced	menu.
3.	Select	OK.	Screen	capture	in	progress	will	display.	
When finished, Screen capture Succeeded will display.	
The	captured	screen	is	saved	as...

40
User Controls
	 Language
Choose	the	multilingual	OSD	menu.	Press		or			into	the	sub	
menu	and	then	use	the			or		key	to	select	your	preferred		
language. Press “Select (Enter)” to finalize the selection.
	 Input	Filter
Enable the input filter. Press 	or			into	the	next	menu	as	below	
and	then	use		or	 to select. Press “Select (Enter)” to finalize 
the	selection.	 The	projector	will	not	search	inputs	that	are		
de-selected.
Setup