Optoma Projector Ex330e User Manual
Here you can view all the pages of manual Optoma Projector Ex330e User Manual. The Optoma manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
4English Appendices Intermission Problems The projector stops responding to all controls If possible, turn off the projector, then unplug the power cord and wait at least 60 seconds before reconnecting power. Lamp burns out or makes a popping sound When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the “Replacing...
Page 42
42English Appendices Message Reminders Fan failed: Temperature warning: Replacing the lamp: Out of display range:
Page 43
43English Appendices Remote Control Problems If the remote control does not work Check the operating angle for the remote control is approximately ±22.5°. Make sure there are no obstructions between the remote control and the projector. Move to within 6 m (20 ft) of the projector. Make sure the batteries are inserted correctly. Make sure batteries are exhausted. If so, replace weak batteries in the remote control.
Page 44
44English Appendices Replacing the lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 min- utes before changing the lamp. Warning: Lamp compartment may be hot! Allow it to cool down before changing the lamp! Warning: To reduce...
Page 45
45English Appendices Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the “Power” button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Use a screwdriver to unscrew the 2 screws from the cover then push up and remove the cover. 5. Use a screwdriver to unscrew the 2 screws from the lamp module. 6. Pull up the lamp handle carefully. 7. Pull out and remove the lamp module. To replace the lamp module, reverse...
Page 46
46English Appendices Compatibility Modes “*”compressed computer image. ModeResolutionV-Sync (Hz) AnalogDigital VGA640 x 48060, 72, 75, 8560, 72, 75, 85 VGA720 x 40070, 8570, 85 SVGA800 x 60056, 60, 72, 75, 8556, 60, 72, 75, 85 SVGA832 x 6247272 XGA1024 x 76860, 70, 75, 8560, 70, 75, 85 XGA1152 x 86460, 70, 75, 8560, 70, 75, 85 * WXGA1280 x 72050, 60*** * WXGA1280 x 7686060 * WXGA1280 x 8006060 * SXGA1280 x 102460, 7560, 75 * SXGA+1400 x 10506060 MAC LC 13”640 x 48066.66*** MAC II 13”640 x...
Page 47
47English Appendices Optoma Global Offices For service or support please contact your local office. USA 715 Sycamore Drive Tel : 408-383-3700 Milpitas, CA 95035, USA Fax : 408-383-3702 www.optomausa.com Service : [email protected] Canada 5630 Kennedy Road, Mississauga, ON, L4Z 2A9, Canada Tel : 905-361-2582 www.optoma.ca Fax : 905-361-2581 Europe 42 Caxton Way, The Watford Business Park Watford, Hertfordshire, WD18 8QZ, UK Tel : +44 (0) 1923 691 800 www.optoma.eu Fax : +44 (0) 1923...
Page 48
48English Appendices Korean WOOMI TECH.CO.,LTD. 4F,Minu Bldg.33-14, Kangnam-Ku, Tel : +82+2+34430004 seoul,135-815, KOREA Fax : +82+2+34430005 Japanese 東京都足立区綾瀬3-25-18 株式会社オーエスエム E-mail : [email protected] サポートセンター:0120-46-5040 www.os-worldwide.com Taiwan 5F., No. 108, Minchiuan Rd. Tel : +886-2-2218-2360 Shindian City, Fax : +886-2-2218-2313 Taipei Taiwan 231, R.O.C. Service : [email protected] www.optoma.com.tw asia.optoma.com Hong Kong Unit A, 27/F Dragon Centre, 79 Wing Hong Street,...
Page 49
49English Appendices Regulation & Safety notices This appendix lists the general notices of your projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable p r o t e c t i o n a g a i n s t h a r m f u l i n t e r f e r e n c e i n a r e s i d e n t i a l installation. This device generates, uses, and can...
Page 50
50English Appendices Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and 2. This device must accept any interference received, i n c l u d i n g i n t e r f e r e n c e t h a t m a y c a u s e u n d e s i r e d operation. Notice: Canadian users T h i s C l a s s B d i g i t a l a p p a r a t u s c o m p l i e s w i t h C a n a d i a n...