Optoma Projector Ex330 User Manual
Have a look at the manual Optoma Projector Ex330 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1077 Optoma manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
4English Appendices Intermission Problems The projector stops responding to all controls If possible, turn off the projector, then unplug the power cord and wait at least 60 seconds before reconnecting power. Lamp burns out or makes a popping sound When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the “Replacing the Lamp” section on pages 44-45. Projector Status Indication LED lighting message Message Power LED Temp LED Lamp LED (Green/Amber)(Red)(Red) Standby State (Input power cord)Amber Power on (Warming)Flashing Green Lamp lightingGreen Error (Over Temp.) Error (Fan fail)Flashing (1 sec on, 1 sec off) Error (Lamp fail) Steady light No light
42English Appendices Message Reminders Fan failed: Temperature warning: Replacing the lamp: Out of display range:
43English Appendices Remote Control Problems If the remote control does not work Check the operating angle for the remote control is approximately ±22.5°. Make sure there are no obstructions between the remote control and the projector. Move to within 6 m (20 ft) of the projector. Make sure the batteries are inserted correctly. Make sure batteries are exhausted. If so, replace weak batteries in the remote control.
44English Appendices Replacing the lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 min- utes before changing the lamp. Warning: Lamp compartment may be hot! Allow it to cool down before changing the lamp! Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped.
45English Appendices Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the “Power” button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Use a screwdriver to unscrew the 2 screws from the cover then push up and remove the cover. 5. Use a screwdriver to unscrew the 2 screws from the lamp module. 6. Pull up the lamp handle carefully. 7. Pull out and remove the lamp module. To replace the lamp module, reverse the previous steps. 8. Turn on the projector and use “Lamp Reset” after the lamp module is replaced. Lamp Reset: (i) Press “Menu” (ii) Select “Options” (iii) Select “Lamp settings” (iv) Select “Lamp Reset (v) Select “Yes”. 1 23 4
46English Appendices Compatibility Modes “*”compressed computer image. ModeResolutionV-Sync (Hz) AnalogDigital VGA640 x 48060, 72, 75, 8560, 72, 75, 85 VGA720 x 40070, 8570, 85 SVGA800 x 60056, 60, 72, 75, 8556, 60, 72, 75, 85 SVGA832 x 6247272 XGA1024 x 76860, 70, 75, 8560, 70, 75, 85 XGA1152 x 86460, 70, 75, 8560, 70, 75, 85 * WXGA1280 x 72050, 60*** * WXGA1280 x 7686060 * WXGA1280 x 8006060 * SXGA1280 x 102460, 7560, 75 * SXGA+1400 x 10506060 MAC LC 13”640 x 48066.66*** MAC II 13”640 x 48066.68*** MAC 19”1024 x 76875*** * MAC1152 x 87075.06*** MAC G4640 x 4806060, 70 i MAC DV1024 x 76875*** * i MAC DV1152 x 87075*** * i MAC DV1280 x 96075*** 480i/p720 x 480***60 576i/p720 x 576***50 * 720p1280 x 720***50, 60 * 1080i1920 x 1080***50, 60 Computer Compatibility Video Compatibility NTSCM (3.58MHz), 4.43 MHz, 480i/p @60Hz PALB, D, G, H, I, M, N, 576i/p @50Hz SECAMB, D, G, K, K1, L HDTV480p, 576p, 720p, 1080i (50/60 Hz) For widescreen reso-lution (WXGA), the compatibility sup-port is dependent on Notebook/PC models.”
47English Appendices Optoma Global Offices For service or support please contact your local office. USA 715 Sycamore Drive Tel : 408-383-3700 Milpitas, CA 95035, USA Fax : 408-383-3702 www.optomausa.com Service : [email protected] Canada 5630 Kennedy Road, Mississauga, ON, L4Z 2A9, Canada Tel : 905-361-2582 www.optoma.ca Fax : 905-361-2581 Europe 42 Caxton Way, The Watford Business Park Watford, Hertfordshire, WD18 8QZ, UK Tel : +44 (0) 1923 691 800 www.optoma.eu Fax : +44 (0) 1923 691 888 Service Tel : +44 (0)1923 691865 Service : [email protected] France Bâtiment E Tel.: +33 1 41 46 12 20 81-83 avenue Edouard Vaillant Fax : +33 1 41 46 94 35 92100 Boulogne Billancourt, France Service : [email protected] Spain Paseo de la Castellana Tel.: +34 91 790 67 01 135 7 Planta +34 91 790 67 02 Madrid, Spain Fax : + 34 91 790 68 69 Deutschland Werftstrasse 25 Tel : +49 (0) 211 506 6670 D40549 Düsseldorf, Fax : +49 (0) 211 506 66799 Germany Service : [email protected] Scandinavia Grev Wedels Plass 2 Tel : +47 32 26 89 90 3015 Drammen Fax : +47 32 83 78 98 Norway Service : [email protected] Latin America 715 Sycamore Drive Tel : 408-383-3700 Milpitas, CA 95035, USA Fax : 408-383-3702 www.optoma.com.br www.optoma.com.mx
48English Appendices Korean WOOMI TECH.CO.,LTD. 4F,Minu Bldg.33-14, Kangnam-Ku, Tel : +82+2+34430004 seoul,135-815, KOREA Fax : +82+2+34430005 Japanese 東京都足立区綾瀬3-25-18 株式会社オーエスエム E-mail : [email protected] サポートセンター:0120-46-5040 www.os-worldwide.com Taiwan 5F., No. 108, Minchiuan Rd. Tel : +886-2-2218-2360 Shindian City, Fax : +886-2-2218-2313 Taipei Taiwan 231, R.O.C. Service : [email protected] www.optoma.com.tw asia.optoma.com Hong Kong Unit A, 27/F Dragon Centre, 79 Wing Hong Street, Tel : +852-2396-8968 Cheung Sha Wan, Fax : +852-2370-1222 Kowloon, Hong Kong www.optoma.com.hk China 5F, No. 1205, Kaixuan Rd., Tel : +86-21-62947376 Changning District Fax : +86-21-62947375 Shanghai, 200052, China www.optoma.com.cn
49English Appendices Regulation & Safety notices This appendix lists the general notices of your projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable p r o t e c t i o n a g a i n s t h a r m f u l i n t e r f e r e n c e i n a r e s i d e n t i a l installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the device and receiver. • Connect the device into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/television technician for help. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Caution Changes or modifications not expressly approved by the manufacturer could void the user’s authority, which is granted by the Federal Communications Commission, to operate this projector.
50English Appendices Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and 2. This device must accept any interference received, i n c l u d i n g i n t e r f e r e n c e t h a t m a y c a u s e u n d e s i r e d operation. Notice: Canadian users T h i s C l a s s B d i g i t a l a p p a r a t u s c o m p l i e s w i t h C a n a d i a n ICES-003. R e m a r q u e à l ’ i n t e n t i o n d e s u t i l i s a t e u r s canadiens Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries • EMC Directive 2004/108/EC (including amendments) • Low Voltage Directive 2006/95/EC • R & TTE Directive 1999/5/EC (if product has RF function) Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle it.