Optoma Projector Ew865 User Manual
Have a look at the manual Optoma Projector Ew865 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1077 Optoma manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
English5 User Controls When making a direct connection from your computer to the projector Step 3: To open Network Connections, click Start, click Control Panel, click Network and Internet Connec- tions, and then click Network Con- nections. Click the connection you want to confi gure, and then, under Network Tasks , click Change settings of this connection. Step 4: On the General tab, under This connection uses the following items, click Internet Protocol (TCP/IP), and then click “Proper- ties”.ties Step 5: Click Use the following IP address, and type in as below: 1) IP address: 192.168.0.101 2) Subnet mask: 255.255.255.0 3) Default gateway: 192.168.0.2543) Default gateway: 192.168.0.254 Step 6: To open Internet Options, click IE web browser, click Internet Options, click the Connections tab and click “LAN Settings...”LAN Settings... Step 7: All items in the Local Area Network (LAN) Setting window must be unchecked. Then click “OK” button twice.“OK” button twice. Step 8: Connect a cat5 Ethernet cross-over cable between the projector and the computer. Step : Find an IP Address (92.68.0.00) from LAN function of projector.Step : Find an IP Address (92.68.0.00) from LAN function of projector.Step : Find an IP Address (92.68.0.00) from LAN function of projector. Step 2: Select “Apply” and push the “Enter” button. Once the setting\ is saved, exit the OSD by pushing “Menu” button. 192.168.0.100
English52 User Controls Crestron RoomView Control Tool Crestron RoomView™ provides a central monitoring station for 250+ control systems on a single Ethernet network (more are possible, the number depends on the combination of IP ID and IP address). Crestron RoomView monitors each projector, including projector’s online status, system power, lamp life, network setting and hardware faults, plus any custom attribute as defi ned by the Administrator. The Administrator can add, delete, or edit room information, contact information and events, which are logged automatically by the software for all users. (Operation UI as following image) Main Screen Edit Room . 2. NOTE Crestron Room-View function support is depen-dent on models.
English53 User Controls Edit Attribute Edit Event For more information, please visit http://www.crestron.com & www.crestron.com/getroomview. 3. 4.
English54 User Controls Blending Choose the “On” to turn blending on. Choose the “Off” to turn blending off. Crop Choose the “On” to turn crop on. Choose the “Off” to turn crop off. Overlap This allows you to set the overlap edge of blending area. Bright Adj. This allows you to adjust the brightness of the blending area. Gamma This allows you to select the gamma mode. SETUP | Image Blending * NOTE (*) Optional func-tion
English55 User Controls OPTIONS NOTE Press direct source key on remote control-ler, it will change source directly and automatical-ly set the Source Lock to “ON”.To turn off the keypad lock, press and hold “Enter” key on top of the projec-tor for 5 seconds. Source Lock On: The projector will only search current input connection. Off: The projector will search for other signals if the current input signal is lost. High Altitude When “On” is selected, the fans will spin faster. This feature is useful in high altitude areas where the air is thin. Information Hide On: Choose “On” to hide the info message. Off: Choose “Off” to show the “searching” message. Keypad Lock When the keypad lock function is “On”, the control panel will be locked however, the projector can be operated by the remote con- trol. By selecting “Off”, you will be able to reuse the control panel. Test Pattern Display a test pattern. There are Grid, White and None. Background Color Use this feature to display a “Blue”, “Black”, or “Gray”\ screen when no signal is available. 2V Trigger 2V trigger provides a standard trigger for motorized screens. VGA Out Use this feature to display the screen from input source. Auto: In standby mode (active), the default VGA out loops through from VGA; unless VGA2 locked in last operation, VGA2 will loop through to VGA out. VGA : Choose the VGA -In input connector. VGA 2: Choose the VGA 2-In input connector.
English56 User Controls Information Display the projector information for source, resolution, and soft- ware version on the screen. Reset Choose “Yes” to return the display parameters on all menus to the factory default settings. OPTIONS (Continued) NOTE Remote code: show the remote code of the projector.Remote code(Active): show the remote code of the remote control.
English57 User Controls Lamp Hours Display the projection time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp. Brightness Mode Bright: Choose “Bright” to increase the brightness. Eco: Choose “Eco” to dim the projector lamp which will lower power consumption and extend the lamp life. Image AI: Image AI improves the contrast of the picture by optimizing the brightness of the lamp according to the picture content. Lamp Reset Reset the lamp hour counter after replacing the lamp. OPTIONS | Lamp Settings NOTE When ambient temperature is over 35°C, the projector will switch to “Eco Mode” automati-cally.
English58 User Controls OPTIONS | Remote Settings Function Choose your desired function from “Brightness” , “PIP” or “\ Projec- tion”. Function 2 Choose your desired function from “Contrast” , “PIP Source”, “PIP Swap” or “Color”. Top IR Sensor When this function is “On”, the projector can be operated by the remote control from top IR receiver. By selecting “Off”, you will be able to use the control panel keys or operate by the remote control from front IR receiver. Front IR Sensor When this function is “On”, the projector can be operated by the remote control from front IR receiver. By selecting “Off”, you will be able to use the control panel keys or operate by the remote control from top IR receiver. Remote Code Set remote code of the projector. Default code (common code): 00 Remote code: 0 ~ 99
English59 User Controls OPTIONS | Advanced Direct Power On Choose “On” to activate Direct Power mode. The projector will au- tomatically power on when AC power is supplied, without pressing the “” key on the projector control panel or on the remote control. Signal Power On The projector will power on when it receives a signal. This elimi- nates the need to use the “Power” button on the remote control or \ the projector keypad. Auto Power Off (min) Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). Sleep Timer (min) Sets the countdown timer interval. The countdown timer will start, with or without a signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). Power Mode (Standby) Eco.: Choose “Eco.” to save power dissipation further < 0.5W. Active: Choose “Active” to return to normal standby and the VGA out port will be enabled. Baudrate Select RS232 baudrate from “9600”, “9200”, or “38400”. NOTE Eco (
English60 User Controls Network Application System Introduction * Network application system include Optoma Presenter Sys- tem, Web Control System and Multi-media Card Reader. Application which can bring the high performance in network projection. Base on network protocol, user can configure the projector remotely. It supports to connect the PC with Projector by USB, Ethernet, and Wireless. This project makes full use of the network capability. It allows the administrator to control all the projectors in one building by one PC. When some emer- gencies happen, the projector can send out alert information to administrator by email and web page. It can read more than one USB device directly and show all the images in it. This project consists of three software applications which make full use of the network and USB capability: Web Control Card Reader Optoma Presenter How to use Web Control The Web Control application allows user to configure the projec- tor remotely base on various network protocol. It is convenient for administrator to control the whole projectors in one building by one PC. . Start the web browser, and enter the IP address of the projector in URL: http://IP-address, the log-in web page is displayed. NOTE (*) This function does not support for basic model.