Optoma Projector Ep910 User Manual

							
21English

User Controls

 Brightness
 Adjust the brightness of the image.
  Press the  to darken image.
  Press the  to lighten the image.
 Contrast
 The contrast controls the degree of difference between the lightest  
  and darkest parts of the picture. Adjusting the contrast changes  
  the amount of black and white in the image.
  Press the  to decrease the contrast.
  Press the  to increase the contrast.
 Colour
 Adjusts a video image from black and white to fully saturated  
  colour.
  Press the  to decrease the amount of colour in the image.
  Press the  to increase the amount of colour in the image. 
 Tint 
 Adjusts the colour of video inputs.
  Press the  to increase the amount of green in the image.
  Press the  to increase the amount of red  in the image. 
 Sharpness 
 Adjusts the sharpness of the image.
  Press the  to decrease the sharpness.
  Press the  to increase the sharpness.
Image-I 
						

							
22English

User Controls

 Frequency
  “Frequency”changes the display data frequency to match the  
  frequency of your computer’s graphic card. If you experience a  
  vertical flickering bar, use this function to make an adjustment.
 Tracking
  “Tracking” synchronizes the signal timing of the display with the  
  graphic card. If you experience an unstable or flickering image, use  
  this function to correct it.
 H.Position (Horizontal Position)
  Press the  to move the image left. 
  Press the  to move the image right. 
 V. Position (Vertical Position)
  Press the  to move the image down.
  Press the  to move the image up. 
						

							
23English

User Controls

Image-II
 H. Keystone (Horizontal Keystone)
 Correct horizontal keystone distortion.
 V. Keystone (Vertical Keystone)
  Correct vertical keystone distortion.
 Corner Klick 
 Compensate for image distortion by adjusting one corner at a time.
 Auto V. Keystone 
 Automatically corrects vertical keystone error.
 Colour Temp.
 Adjust the colour temperature. At higher temperature, the screen  
  looks colder; at lower temperature, the screen looks warmer. 
 Blanking Colour
 Use this feature to display a black or blue screen when no signal  
  is available.
 Display Mode
 There are many factory presets optimized for various types of  
  images.  
 1. Use “Menu” to start. 2. Use “Menu” choose one corner and press Enter to confirm. 3. Use        to move the angle and press Enter to 
confirm. 
						

							
24English

User Controls

  PC: For computer or notebook. (brightest image)
  Movie: For home theater. 
  Game : For game.
  sRGB: For standard colour. (best colour reproduction)
  User: Memorize user’s settings.
 White Peaking
 Use the white peaking control to set the white peaking level of  
  DMD chip. 0 stands for minimal peaking, and 10 stands for    
  maximum peaking.  If you prefer a brighter image, adjust towards  
  the maximum setting.  For a smooth and more natural image,  
  adjust towards the minimum setting.
 Degamma
  This allows you to choose a degamma table that has been fine- 
  tuned to bring out the best image quality for the input. 
						

							
25English

User Controls

 Display Format
 Use this function to choose your desired aspect ratio.
  4:3 : The input source will be scaled to fit the projection    
    screen. 
  Native : The input source will be displayed without scaling.
  Window: When a 4:3 image is bigger than a 16:9 screen,    
    select the “Window” mode to fit the image onto the screen  
    without changing the projection distance.
 Zoom
  Zoom1/Zoom2: Zoom in on the image from Main Screen and  
   PIP Screen. 
  Off: Normal mode.
 Image Shift
  Position1/Position2: Shifts the projected image position    
    vertically from Main Screen and PIP Screen. 
  Off: Normal mode.
 Freeze
 Choose “On” pauses the screen image, press “Off” to resume    
  display. 
WindowOriginal Pixel
Management-I 
						

							
26English

User Controls

 Screen
  Single : Projection single screen.
  PIP Window : Main Screen is large screen; PIP Screen is small  
    and displays in the corner of the main screen.
  Split Screen : Main Screen and PIP Screen equal size and side by 
     size.
 PIP Size
 Choose the PIP screen size.
 PIP Location
 Choose the PIP screen position on the display screen.
 Swap
 Press “Enter” to swap main screen and PIP screen.
Split ScreenPIP Window
To use PIP or Split Screen function, one source must be connect-ed to the DVI (Digital) input. 
						

							
27English

User Controls

 Language
  Choose the multilingual OSD menu . Use the   or  key to select  
  your preferred language. 
  Press “Enter” to finalize the selection. 
 Projection
  Front 
    The factory default setting. 
  Rear Front 
    When you select this function, the projector reverses the image  
    so you can project from behind a translucent screen.
  Ceiling 
    When you select this function, the projector turns the image  
    upside down for ceiling-mounted projection.
  Rear Ceiling 
    When you select this function, the projector reverses and turns  
    it upside down. You can project from behind a translucent  
    screen with ceiling mounted projection.
 Brite Mode
 Choose “On” to increase light output.  Choose “Off” to return  
  normal mode.
 Source Detect
  Auto: Detect the source automatically.  
  Manual: Select input source manually.
Management-II 
						

							
28English

User Controls

 Auto Shutdown
 Sets the interval of power-off of the system, if there is no signal  
  input. (In minutes).  The projector will power down automatically if  
  there is no signal. Auto shut down sets the delay time.
 VGA Out
 Choose the source for the VGA loop throught output, VGA or DVI.
 Lamp Hours
 Display the cumulative lamp operating time.
 Lamp Reminding
 Choose this function to show or to hide the warning message when  
  the changing lamp message is displayed. The message will appear  
  30 hours before end of life.
 Reset Lamp Hours
 Reset the lamp life hour counter after replacing the lamp. 
 Factory Default
 Choose “Enter” to return the display parameters on all menus to the 
factory default settings. 
						

							
29English

User Controls

 Select the colour with  or  and adjust with  or  to change  
 Red, Green, or Blue for brightness (Gain) and contrast (Offset). 
 Reset
 Choose “Enter” to restore the factory default setting for this menu.
Colour 
Adjustment 
						

							
30English

User Controls

Audio
 Volume
  Press  to decrease the volume.
  Press  to increase the volume.
 Treble
  The treble setting controls the higher frequencies of your audio 
  source. 
  Press  to decrease the treble.
  Press  to increase the treble.
 Bass
 The bass setting controls the lower frequencies of your audio
  source. 
  Press  to decrease the bass.
  Press  to increase the bass.
 Stereo/Mono
  Stereo:  Stereo sound.
  Mono:  Mono sound.
 Mute
  On:  Choose  or  to Mute Sound (On). 
  Off:  Choose  or  to turn Mute off and restore sound (Off).