Optoma Projector Ep600 User Manual

English
ŠConnecting the Mac adapter
1. Switch the supplied  Mac adapter to your desired resolution.  Refer to following
figure and the section of compatibility mode on page 31.9
*Mac 13” = 640 x 480
Mac 16” = 832 x 624
Mac 19” = 1024 x 768
Mac 21” = 1152x 870
VGA = extra mode
143 2
1234
13”
16”
19”
21”
VGA
: OFF
: ON
 
ONSwitch
Example: Mac 16”
2. Connecting the Mac adapter to the VGA cable and your host computer.
3.Turn on the projection display first and then the computer.
*  Restart your computer when...

English
Follow regular setup procedures.  Make sure you have a 100% compatible Microsoft
Mouse and a Microsoft Mouse driver installed.
Š Connecting the remote control
10
4Setting Up Procedure:
1. Turn off your computer.
2. Unplug the mouse from your computer.*
3. Connect the remote receiver cable to the computer and the projection display.
4. If you need an external mouse, connect the mouse with the other end of the
receiver cable.
5. Turn  on your projection display first and then your computer.
6....

English
Powering On/Off  the Projection Display
‹ ‹‹ ‹
‹Powering On Projection Display.
4 44 4
4Switch on the power; then turn on the lamp.
The “POWER/STANDBY” indicator will blink green when the display
initializes.  After you press the “POWER” button, it will light green solidly and also
the “LAMP” indicator lights amber of about 30 seconds.11
POWER /
STANDBY
LAMP
TEMP.
‹ ‹‹ ‹
‹Powering off  projection display
4 44 4
4Turn off lamp power first for one minute and then switch off the power.
Press “POWER”...

English
Adjusting the Image Size
4Press “FOCUS / ZOOM” button from the display, you can see you a zoom icon
on the screen.  Then press “+”or “-” to adjust it. (Refer to the below Figure.)
4Adjust the height of projected image.
c Press “FOCUS / ZOOM” button from the display, you can see you a focus
icon on the screen.  Then press “+”or “-” to adjust it.
dPress the elevator releasing button to release the elevator foot. Š ŠŠ Š
Š
Adjusting the Image Size.
12
(
Refer to the following figures below)
Screen
c...

English
Š ŠŠ Š
Š Focus the image
Press “FOCUS/ZOOM” button from the display, you can see a “FOCUS”
icon on the screen.  Then press “+” or “-” to adjust it.
Height (H1)
20”
3.6’
6.9’
11.8’
17.8’
23.7’
35.2’
47.0’
75.6’
(20) [32]
(37)[60]
(62) [100]
(94) [150]
(125) [200]
(188)[300]
(250)[400] [600]
(400)
(  ) Minimun [   ] Maximum
H1
H2
Max.
Screen
Distance
Min.32”
20”
3.6’6.9’
11.8’
17.8’
23.7’
35.2’ 47.0’ 75.6’ 60”
37”100”
62”150”
94”200”
125”300”
188”400”
250”640”
400”
Screen Size
Height (H2)60” 100”...

English
User Controls
User Control Overview
There are two ways for you to control the functions: panel control and remote control.
ŠPanel control
ŠRemote control
Enlarge Functions
Source Selection
VolumeEnter/Pointer Power on/Standby
On-Screen Menus Directional Select KeysFREEZE CURTAIN ON
STANDBY
ENLARGE FOCUS/ZOOM SOURCE
ENTER
POINTER MENU
MUTE
VOLUME
DRAG
R
L
Freeze
LIGHT
Mouse Left Button Down
Right Mouse Button
/Backlight Function
Left Mouse Button
The Joystick
(Mouse Cursor Function)
MENU
FOCUS /...

English
ŠOSD menus
The OSD (On-Screen Display) menus will allow you to easily adjust the display
functions.  Press the “MENU” button for the OSD menu options.
4When in VGA M03H/ M13H
mode the OSD will be:
4When in video souces, the OSD will be:
Language
Contrast
Tracking
Frequency
VGA Text/Graph
Audio
Rear Projection
Celing
Lamp Life
Lamp Warning
Exit
4When in 1024 x 768 mode,
the OSD will be:
Language
Contrast
Tracking
Frequency
Audio
Rear Projection
Celing
Pan/Compress
Lamp Life
Lamp Warning
Exit...

English
Function Descriptions
Press the “Power on/Standby” button to turn on the projection
lamp.
Press “Menu” button to pop up the OSD menu.
Press “Reset” to return the display parameters of the current
mode to its factory default settings.
Use “ Source” control to choose between video and computer
source.
Press “FOCUS / ZOOM” button from the display, you will see
the focus icon appearing on the screen.  Then use “+” or “-”
to make adjustments.
Press “FOCUS / ZOOM” button from the display, you will see...

English
17
Choose “Language” item to select your choice of English,
German, French, Spanish, Italian, Japanese and Chinese.
(1) Volume adjustments: “+”, “-”, “Mute”
(2) Audio adjustments: Bass, Treble, Balance, Volume, 4
sound modes.
Choose this function from OSD menu for a rear projection.
Choose this funtion from OSD menu for a ceiling projection.
This function tells you how much lamp life remains.  Please
refer to the section of “ changing the lamp “ on page 23 for
more information.
Choose this...

English
18
Press the “Freeze” button to still the screen image.
Press “Curtain” button to cover all the screen, then use
5or
6to pull up or down the curtain.  Use
3or
4button
to choose curtain color.
Press “Enlarge” from the remote control first and then
use “+” or “-” button to enlarge or resume the projected
images.  Use “Enter” key to exit this function.
Choose this function  from OSD menu to adjust contrast
of the image.
Choose “Tracking” item to synchronize the signal timing
of the display to that...