Optoma Projector Eh501 User Manual
Have a look at the manual Optoma Projector Eh501 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1077 Optoma manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 26
EN-26
Adjusting Projection Image Size
Refer to the graphic and table below to determine the screen size and projection
distance.
XGA model
WXGA model
Screen size
Diagonal
[inch (cm)]4 : 3 Screen
Projection distance [feet (m)]
Image height
[inch (cm)]Vertical offset
[inch (cm)]
(min. zoom) (max. zoom)
30 (76) 2.7 (0.85) 4.5 (1.4) 18 (46) 2.7 (7)
40 (102) 3.7 (1.1) 5.9 (1.8) 24 (61) 3.6 (9)
60 (152) 5.6 (1.7) 8.9 (2.7) 36 (91) 5.4 (14)
80 (203) 7.4 (2.3) 11.9 (3.6) 48 (122) 7.2 (18)
100 (254) 9.3 (2.8)...](http://img.usermanuals.tech/thumb/3621/93039/w64_optoma-eh501-manual_d-25.png "Page 26
EN-26
Adjusting Projection Image Size
Refer to the graphic and table below to determine the screen size and projection
distance.
XGA model
WXGA model
Screen size
Diagonal
[inch (cm)]4 : 3 Screen
Projection distance [feet (m)]
Image height
[inch (cm)]Vertical offset
[inch (cm)]
(min. zoom) (max. zoom)
30 (76) 2.7 (0.85) 4.5 (1.4) 18 (46) 2.7 (7)
40 (102) 3.7 (1.1) 5.9 (1.8) 24 (61) 3.6 (9)
60 (152) 5.6 (1.7) 8.9 (2.7) 36 (91) 5.4 (14)
80 (203) 7.4 (2.3) 11.9 (3.6) 48 (122) 7.2 (18)
100 (254) 9.3 (2.8)...")
![Page 27
EN-27 1080P model
Note
„Position the projector in a horizontal position; other positions can cause heat build-
up and damage to the projector.
„Keep a space of 30 cm or more between the sides of the projector.
„Do not use the projector in a smoky environment. Smoke residue may build-up on
critical parts and damage the projector or its performance.
„Consult with your dealer for special installation such as suspending from a ceiling. Screen size
Diagonal
[inch (cm)]16:9 Screen
Projection distance [feet...](http://img.usermanuals.tech/thumb/3621/93039/w64_optoma-eh501-manual_d-26.png "Page 27
EN-27 1080P model
Note
„Position the projector in a horizontal position; other positions can cause heat build-
up and damage to the projector.
„Keep a space of 30 cm or more between the sides of the projector.
„Do not use the projector in a smoky environment. Smoke residue may build-up on
critical parts and damage the projector or its performance.
„Consult with your dealer for special installation such as suspending from a ceiling. Screen size
Diagonal
[inch (cm)]16:9 Screen
Projection distance [feet...")
EN-31 Menu tree Main Menu Sub-MenuSingle-Item Menu IMAGEDisplay ModePresentation / Bright / Movie / sRGB / Blackboard / DICOM SIM / User / 3D Brightness Contrast Sharpness Color Tint AdvancedGamma1.8 / 2.0 / 2.2 / 2.6 / Film /Video / Graphic BrilliantColor™ Color Temp.Warm / Medium / Cold Color SettingsRedHue / Saturation / Gain GreenHue / Saturation / Gain BlueHue / Saturation / Gain CyanHue / Saturation / Gain MagentaHue / Saturation / Gain Ye l l o wHue / Saturation / Gain WhiteRed / Green / Blue Reset Exit Color SpaceAuto / RGB (0~255) / RGB (16~235) YUV
EN-32 IMAGEAdvancedSignalAutomatic On / Off Phase (VGA) Frequency (VGA) H. Position (VGA) V. Position (VGA) Exit Exit Reset Yes / No DISPLAYFormatXGA: 4:3 / 16:9 / Native / Auto WXGA/1080P: 4:3 / 16:9 or 16:10 / LBX / Native / Auto Edge Mask Zoom Image ShiftH V V Keystone Auto Keystone On / Off 3D3D Mode DLP-Link / IR 3D--->2D 3D / L / R 3D FormatAuto / SBS / Top and Bottom / Frame Sequential 3D Sync Invert On / Off SETUPLanguage Projection Menu Location Screen Type16: 10/16:9 (WXGA)
EN-33 SETUPSecuritySecurity On / Off Security TimerMonth / Day / Hour Change Password Exit Projector ID Audio SettingsInternal Speaker On / Off Mute On / Off Vo lu m eAudio Mic Audio InputDefault / Audio 1 / Audio 2 / Audio 3 AdvancedLogoDefault / Neutral / User Logo Capture Closed Captioning Off / CC1 / CC2 Exit Network LAN SettingsNetwork StatusConnected / Disconnected MAC Address DHCP On / Off IP Address Subnet Mask Gateway DNS Exit WLAN SettingsWLAN On / Off Network StatusConnected / Disconnected MAC Address IP Address SSID Connection ModeInfrastructure / Access Point Exit Control SettingsCrestron On / Off Extron On / Off PJ Link On / Off AMX Device DiscoveryOn / Off Telnet On / Off HTTP On / Off Exit
EN-34 OPTIONSInput SourceVGA1 / VGA2 / Video / S-video / HDMI / DVI / Flash drive/ Network display/ USB display Source Lock On / Off High Altitude On / Off Information Hide On / Off Keypad Lock On / Off Test PatternNone / Grid / White 12V TriggerOn / Off / Auto 3D IR FunctionOn / Front / Back / Off Background ColorBlack / Red / Blue / Green / White Remote SettingsDisplay Mode / Format / 3D Sync Invert / Mute / Test Pattern / DVI / VGA2 / Network Display AdvancedDirect Power On On / Off Signal Power On On / Off Auto Power Off (min.) Sleep Timer (min.) Quick Resume On / Off Power Mode (Standby)Active / Eco Lamp SettingsLamp Hour Lamp Reminder On / Off Brightness ModeBright / Dynamic / Eco + Lamp Reset Yes / No Exit Optional Filter SettingsOptional Filter InstalledYe s / N o Filter Usage Hours Filter ReminderOff / 300hr / 500hr / 800hr / 1000hr Filter Reset Yes / No Exit Reset Yes / No
EN-35 IMAGE Display Mode There are many factory presets optimized for various types of images. „Presentation: Good color and brightness from PC input. „Bright: Maximum brightness from PC input. „Moive: For home theater. „sRGB: Standardised accurate color. „Blackboard: This mode should be selected to achieve optimum color settings when projecting onto a blackboard (green). „User: User’s settings. „DICOM SIM: Recommended for DICOM format files in simulation mode. „3D: Recommended setting for 3D mode. Any further adjustments by the user in 3D will be saved in this mode for further use. Note „DCIM SIM option is only for training or reference. It not used for actual diagnosis. „DICOM represents for the Digital Imaging and Communications in Medicine. This is a standard created by the American College of Radiology and the National Electrical Manufacturers Association. This standard specifies the method of digital image data to be transferred from one system to another. Brightness Brighten or darken the image. Contrast
EN-36Set the difference between light and dark areas. Sharpness Sharpen or soften the image. Color Adjust a video image from black and white to fully saturated color. Tint Shift colors toward red or green. Note „“Color” and “Tint” functions are only supported under Video mode. Advanced Gamma This allows you to choose a degamma table that has been fine-tuned to bring out the best image quality for the input. „Film: for home theater. „Video: for video or TV source. „Graphics: for image source. „2.2: for PC or computer source. BrilliantColor™ This adjustable item utilizes a new color-processing algorithm and system level enhancements to enable higher brightness while providing true, more vibrant colors in picture. The range is from “1” to “10”. If you prefer a stronger enhanced image, adjust toward the maximum setting. For a smoother, more natural image, adjust toward the minimum setting.
EN-37 Color Temp. If set to cold temperature, the image looks more blue. (cold image) If set to medium temperature, the image maintains normal colorings for white. If set to warm temperature, the image looks more red. (warm image) Color Settings Press / /“Enter” key to enter the next menu as below and then use / / / key to select color. Press “Enter” to finalize the selection. „Red/Green/Blue/Cyan/Magenta/Yellow/White: Use / to toggle Hue/ Saturation/Gain and then use / to adjust the value. „Reset: Choose “Yes” to return the factory default settings for color adjustments. Color Space Select an appropriate color matrix type from AUTO, RGB, RGB (0-255)(*), RGB (16-235)(*) or YUV. Note (*) for HDMI only. Signal „Automatic: Automatically selects the singal. If you use this function, the Phase, frequency items are grayed out, and if Signal is not automatic, the phase, frequency items will appear for user to manually tune and saved in settings after that for next time projector turns off and on again. „Phase: Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or flickers, use this function to correct it. „Frequency: Change the display data frequency to match the frequency of your computer’s graphic card. Use this function only if the image appears to flicker vertically. „H. Position: Adjust the image left or right within the projection area. „V. Position: Adjust the image up or down within the projection area.
EN-38 Reset Return the display parameters on IMAGE menu to the factory default set- tings.
EN-39 DISPLAY Format Use this function to choose your desired aspect ratio. For XGA model: For WXGA model: 16:9 or 16:10 depend on “Screen Type” setting. 16:10 Screen Source 480i/p 576i/p1080i/p 720p 4:3 1024x768 center 16:9 1024x576 center Native Displays the original image without any scaling. Auto (Default) If source is 4:3, auto resize to 1024 x 768. If source is 16:9 auto resize to 1024 x 576. If source is 15:9 auto resize to 1024 x 614. If source is 16:10 auto resize to 1024 x 640. 16 : 10 screen480i/p 576i/p1080i/p 720pPC 4:3 1066 x800 center 16:10 1280x800 center LBX 1280x960 center, then get the central 1280x800 image to display. Native 1:1 mapping centered1:1 mapping display 1280 x 8001280x720 Centered1:1 mapping centred Auto (Default) Input source will be fit into 1280x800 display area and be kept its original aspect ratio. If source is 4:3, auto resize to 1066 x 800. If source is 16:9 auto resize to 1280 x 720. If source is 15:9 auto resize to 1280 x 768. If source is 16:10 auto resize to 1280 x 800.
EN-40 16:9 Screen For 1080P model: Edge Mask Edge Mask function removes the noise in a video image. Overscan the image to remove video encoding noise on the edge of video source. Note „Each I/O has different setting of “Edge Mask”. „“Edge Mask” and “Zoom” can’t work at same time. Zoom Zoom in and out the images. Image Shift Shift the projected image position horizontally and vertically. V Keystone Adjust image distortion vertically. If the image looks trapezoidal, this option can help make the image rectangular. Note 16 : 9 screen480i/p 576i/p1080i/p 720pPC 4:3 960x720 center 16:9 1280x720 center LBX 1280x960 center, then get the central 1280x720 image to display. Native 1:1 mapping centered1:1 mapping display 1280 x 720 1280x720 Centered 1:1 mapping centred Auto (Default) If this format is select, Screen type will auto become 16:9 (1280 x 720). If source is 4:3, auto resize to 960 x 720. If source is 16:9 auto resize to 1280 x 720. If source is 15:9 auto resize to 1200 x 720. If source is 16:10 auto resize to 1152 x 720. 16 : 9 screen480i/p 576i/p1080i/p 720pPC 4:3 1440x1080 center 16:9 1920x1080 center LBX 1920x1440 center, then get the central 1920x1080 image to display. Native 1:1 mapping centered Auto (Default) If this format is select, Screen type will auto become 16:9 (1920 x 1080). If source is 4:3, auto resize to 1440 x 1080. If source is 16:9 auto resize to 1920 x 1080. If source is 16:10 auto resize to 1920 x 1200 and cut 1920 x 1080 area to display.