Home > Optoma > Projector > Optoma Projector Eh501 User Manual

Optoma Projector Eh501 User Manual

Here you can view all the pages of manual Optoma Projector Eh501 User Manual. The Optoma manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 81

EN-81
RS232 Commands and Protocol 
Function List
RS232 Pin Assignments
D-Sub 9 pin
(from the projector side)
11 CD
2RXD
3TXD
4DTR
5GND
6DSR
7RTS
8CTS
9RI
(from the cable side)
C1 COLOR C2
1Black1
2Brown3
3Red2
4 Orange 6
5Yellow5
6Green4
7Blue8
8 Purple 7
9White9
SHELL DW SHELL 

Page 82

 EN-82
RS232 Protocol Function List
Note
„To also include AMX beacon signal in RS232 protocol
„In basic terms, AMX controllers will issue a poll periodically to detect 3rd party 
devices connected to the RS232 port (in this case Optoma). The poll is AMX in ASCII 
followed by a carriage return r.
„There is a  after all ASCII commands.
„0D is the HEX code for  in ASCII code
Baud Rate 9600
Data Bits 8
Parity None
Stop Bits 1
Flow Control None
UART16550 FIFO Disable
Projector Return (Pass) P
Projector Return...

Page 83

EN-83
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- SEND to projector                   
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 
232 ASCII Code HEX Code Function    Description...

Page 84

 EN-84
~XX230 3  7E 30 30 32 33 30 20 31 0D  3D Mode  IR 
~XX400 0  7E 30 30 34 30 30 20 30 0D  3D(2D 3D 
~XX400 1  7E 30 30 34 30 30 20 31 0D    L 
~XX400 2  7E 30 30 34 30 30 20 32 0D    R 
~XX405 0  7E 30 30 34 30 35 20 30 0D  3D Format  Auto 
~XX405 1  7E 30 30 34 30 35 20 31 0D    SBS 
~XX405 2  7E 30 30 34 30 35 20 32 0D    Top and Bottom 
~XX405 3  7E 30 30 34 30 35 20 33 0D    Frame sequential 
~XX231 0  7E 30 30 32 33 31 20 30 0D    3D Sync Invert  On 
~XX231 1  7E 30 30 32 33 31 20 31 0D    3D...

Page 85

EN-85
~XX455 0  7E 30 30 34 35 35 20 30 0D    Extron      Off 
~XX455 1  7E 30 30 34 35 35 20 31 0D         On 
~XX456 0  7E 30 30 34 35 36 20 30 0D    PJLink      Off 
~XX456 1  7E 30 30 34 35 36 20 31 0D         On 
~XX457 0  7E 30 30 34 35 37 20 30 0D    AMX Device Discovery      Off 
~XX457 1  7E 30 30 34 35 37 20 31 0D        On 
~XX458 0  7E 30 30 34 35 38 20 30 0D    Telnet      Off 
~XX458 1  7E 30 30 34 35 38 20 31 0D        On 
~XX459 0  7E 30 30 34 35 38 20 30 0D    HTTP      Off 
~XX459 1  7E...

Page 86

 EN-86
~XX140 18  7E 30 30 31 34 30 20 31 38 0D      Volume + 
~XX140 19  7E 30 30 31 34 30 20 31 39 0D      Brightness 
~XX140 20  7E 30 30 31 34 30 20 32 30 0D      Menu 
~XX140 21  7E 30 30 31 34 30 20 32 31 0D      Zoom 
~XX140 47  7E 30 30 31 34 30 20 34 37 0D      Source 
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 
SEND from projector...

Page 87

EN-87
Troubleshooting
Refer to the symptoms and measures listed below before sending the pro-
jector for repairs. If the problem persists, contact your local reseller or ser-
vice center. Please refer to LED Indicator Messages as well.
Start-up
If no lights turn on:
„Be sure that the power cord is securely connected to the projector and the
other end
 is plugged into an outlet with power.
„Press the power button again.
„Unplug the power cord and wait for a short while, then plug it in and press
the...

Page 88

 EN-88
LED Indicator Messages
Message Power LED
(Red)Power LED
(Green)Te m p  L E D
(Red)Lamp LED
(Red)
Standby State
(Input power 
cord)Steady light
Power on 
(Warming)Flashing
0.5 sec off 
0.5 sec light
Power on & Lamp 
lightingSteady light
Power off 
(Cooling)Flashing
0.5 sec off  
0.5 sec light 
Back to Red 
steady light when 
cooling fan turns 
off
Quick Resume 
(100 secs)Flashing 
0.25 sec off  
0.25 sec light
Error 
(Lamp fail)Flashing Steady light
Error 
(Fan fail)Flashing Flashing
Error 
(Over...

Page 89

EN-89
Optoma Global Offices
For service or support please contact your local office.
USA
3178 Laurelview Ct.
Fremont, CA 94538, USA 888-289-6786
www.optomausa.com [email protected]
Canada
3178 Laurelview Ct.
Fremont, CA 94538, USA 888-289-6786
www.optomausa.com [email protected]
Europe
42 Caxton Way, The Watford Business 
Park
Watford, Hertfordshire,
WD18 8QZ, UK +44 (0) 1923 691 800
www.optoma.eu +44 (0) 1923 691 888
Service Tel : +44 (0)1923 691865 [email protected]
France
Batiment E +33 1 41...

Page 90

 EN-90Scandinavia
Lerpeveien 25 +47 32 98 89 90
3040 Drammen +47 32 98 89 99
Norway [email protected]
PO.BOX 9515
3038 Drammen
Norway
Latin America
3178 Laurelview Ct.
Fremont, CA 94538, USA 888-289-6786
www.optoma.com.br www.optoma.com.mx
Korea
WOOMI TECH.CO.,LTD.
4F,Minu Bldg.33-14, Kangnam-Ku, +82+2+34430004
seoul,135-815, KOREA +82+2+34430005
Japan
東京都足立区綾瀬 3-25-18
株式会社オーエス[email protected]
コンタクトセンター:0120-380-495www.os-worldwide.com
Ta i w a n
12F., No.215, Sec. 3, Beixin Rd., +886-2-8911-8600...
Start reading Optoma Projector Eh501 User Manual

Related Manuals for Optoma Projector Eh501 User Manual

All Optoma manuals