Optoma Hd803 Projector User Manual

English
1

Table of contents
Table of Contents ...................................................................................1
Usage Notice ..........................................................................................2
Safety Information .........................................................................................2
Precautions ...................................................................................................3
Eye Safety Warnings...

2

Usage Notice

Safety Information
The lightning flash with arrowheard within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous volt-age” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of import operating and maintenance (servicing) instructions in the literature accompanying the appliance....

English
3

Usage Notice

Precautions
 
Please follow all warnings, precautions and mainte-
nance as recommended in this user’s guide.
When the lamp reaches the end of its life, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under “Replacing the Lamp” section on page 41.
▀■ Warning-Do not look into the projector’s lens when the 
lamp is on.  The bright light may hurt your 
eyes.
▀■ Warning-To reduce the risk of fire or...

4

Usage Notice

  Do:
▀■   Turn off the product before cleaning.
▀■   Use a soft cloth moistened with mild detergent to clean the 
display housing.
▀■   Disconnect the power plug from AC outlet if the product is not 
being used for a long period of time.
  Do not:
▀■   Block the slots and openings on the unit provided for ventila-
tion.
▀■   Use abrasive cleaners, waxes or solvents to clean the unit.
▀■   Use under the following conditions:
-   Extremely heat, cold or humidity.
-   In areas susceptible...

English
5

Usage Notice

Eye Safety Warnings
 
▀■  Avoid staring directly into the projector beam at all times.
▀■  Minimize standing facing into the beam. Keep your back to 
the beam as much as possible.
▀■ A stick or laser pointer is recommended to avoid the need for 
the user to enter the beam. 
▀■ Ensure that projectors are located out of the line of sight from 
the screen to the audience; this ensures that, when presenters 
look at the audience, they do not also have to stare at the pro-
jector...

6

Introduction

Product Features
 
This product is a 1080p single chip 0.95” DLP® projector. Out-
standing features include:
▀■ Native 16:9 1080p DLP® Technology
▀■ Complete 10-bit video processing (decoding, deinterlac-
ing, scaling, image enhancement and color) 
▀■ Use 7 segment color wheel R/G/B/ND/R/G/B cycle
▀■ PixelWorksTM video processor chip
▀■ Studio-grade 480i/576i Standard Definition de-interlac-
ing and 1080i High Definition de-interlacing
▀■ Video Compatibility: 
▪ 480i-NTSC, NTSC4.43
▪...

English
7

Introduction

Power Cord 1.8m
IR Remote Controller
Package Overview
This projector comes with all the items shown below.  
Check to make sure your unit is complete.  Contact your 
dealer immediately if anything is missing.
Documentation : 
 User’s Manual
 Warranty Card
 Quick Start Card
Due to the difference in applications for each country, some regions 
may have different ac-cessories.
2 x AA Batteries
Projector with lens cap
RCA Component Cable for YPbPr 2.0m
RS232 Cable 1.8m
DVI to VGA...

8

Introduction

1.  Control Panel
2.  Zoom Lever
3.  Focus Ring
4.  Elevator Button (one on each side)
5.  Elevator Feet
6.  Zoom Lens
7.  IR Receivers
8.  Connection Ports
9.  Power Socket
10. Tilt-Adjustment Feet
11.  Air exhaust vent
Main Unit
Product Overview
35
5
46
118
10
10
2
7
7
59
1
10
7
1         

English
9

Introduction

Control Panel
1.  Power and IR Receiver
2. Power Indicator LED 
3.  Lamp Indicator LED
4.  Temp Indicator LED
5.  Menu (On/Off)
6.  Four Directional Select Keys
7.  Source Select
8.  Re-Sync
9.  Enter
432
65789
1         

10

Introduction

Connection Ports
1.  +12V Relay Connector
2.  Composite Video Input Connector
3.  RS232 Input Connector
4.  S-Video Input Connector
5.  DVI-I Input Connector (PC Digital and DVI-HDCP)
6.  HDMI 1 Connector
7. HDMI 2 Connector
8.  Component Video Input Connector
9. Power Socket
10. Kensington MicrosaverTM Lock Port
6541
1098
237