Optoma Hd73 Projector User Manual
Have a look at the manual Optoma Hd73 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1077 Optoma manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Appendices English 41 Remark : “*”com-pressed computer image. Compatibility Modes ModeResolutionV.Frequency (Hz) DVI-ADVI-DHDMI/YPbPr VESA VGA640 x 48060 VESA VGA640 x 48072 VESA VGA640 x 48075 VESA VGA640 x 48085 VESA VGA848 x 48060 VESA VGA848 x 48075 VESA VGA848 x 48085 VESA VGA720 x 40070 VESA VGA720 x 40085 VESA SVGA800 x 60056 VESA SVGA800 x 60060 VESA SVGA800 x 60072 VESA SVGA800 x 60075 VESA SVGA800 x 60085 VESA XGA1024 x 76850 VESA XGA1024 x 76860 VESA XGA1024 x 76870 VESA XGA1024 x 76875 VESA XGA1024 x 76885 VESA WXGA1280 x 76860 VESA WXGA1280 x 76875 VESA WXGA1280 x 76885 HD848 x 48060 HD1024 x 57650 HD1280 x 72050 HD1280 x 72060 * HD1920 x 108050 * HD1920 x 108060 SD848 x 48060 SD1024 x 57650 * SXGA1280 x 102460 * SXGA1280 x 102470 * SXGA1280 x 102472 * SXGA1280 x 102475 * SXGA1280 x 102485 * SXGA+1400 x 105060 * SXGA+1400 x 105075 * MAC1152 x 87075.06 MAC G4640 x 48060
Appendices 42 4 7 . 0 0 8 2 . 0 0 1 . 0 0 7 9 . 5 0 1 2 4 . 2 9 6 7 . 0 8 5 3 . 3 3 / 2 5 4 . 5 0 2 0 4 . 5 0 M a x . / M i n . 3 4 7 . 3 2 4 6 . 2 1 5 . 6 9 4 . 7 Please note that damage resulting from incorrect installation will invalidate the war-ranty. Ceiling Mount Installation 1. To prevent damaging your projector, please use the ceil- ing mount package for installation. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attached a mount to the projec- tor met the following specifi cations: Screw type: M3 Maximum screw length: 10mm Minimum screw length: 7.5mm Warning: 1. If you buy the ceiling mount from other com-pany, please ensure that there is at least 10cm distance between the bottom cover of the projector and the ceiling.2. Avoid placing the projector near sources of heat such air-con-ditioning units and heaters otherwise it may overheat and shut down automatically.3. Ceiling mounting shall be mounting on metal or concrete.
Appendices English 43 Optoma Global Offi ce For service or support please contact your local offi ce. USA 715 Sycamore Drive Tel : 408-383-3700 Milpitas, CA 95035, USA Fax: 408-383-3702 www.optomausa.comService : [email protected]@optoma.com Canada 5630 Kennedy Road, Mississauga, ON, L4Z 2A9, Canada Tel : 905-882-4228Fax: 905-882-4229 www.optoma.com Europe 42 Caxton Way, The Watford Business Park Watford, Hertfordshire, WD18 8QZ, UK Tel : +44 (0) 1923 691 800 Fax: +44 (0) 1923 691 888 www.optomaeurope.com Service Tel : +44 (0)1923 691865 Service : [email protected]@tsc-europe.com Taiwan 5F., No. 108, Minchiuan Rd. Tel : +886-2-2218-2360 Shindian City, Taipei Taiwan 231, Fax: +886-2-2218-2313 R.O.C. www.optoma.com.tw Service : [email protected]@optoma.com.tw asia.optoma.com Hong Kong Room 2507, 25/F., China United Plaza, No. 1008 Tai Nan West Street, Lai Chi Kok, Kowloon, Hong Kong Tel : +852-2396-8968Fax: +852-2370-1222 www.optoma.com.hk China 5F, No. 1205, Kaixuan Rd., Tel : +86-21-62947376 Changning District Fax: +86-21-62947375 Shanghai, 200052, China www.optoma.com.cn Latin America 715 Sycamore Drive Tel : 408-383-3700 Milpitas, CA 95035, USA Fax: 408-383-3702 www.optoma.com.br www.optoma.com.mx
Appendices 44 Regulation & safety notices This appendix lists the general notices of your Projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc- tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be deter- mined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the device and receiver. • Connect the device into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/television technician for help. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Caution Changes or modifi cations not expressly approved by the manufacturer could void the user’s authority, which is Changes or modifi cations not expressly approved by the manufacturer could void the user’s authority, which is Changes or modifi cations not expressly approved by the granted by the Federal Communications Commission, to manufacturer could void the user’s authority, which is granted by the Federal Communications Commission, to manufacturer could void the user’s authority, which is operate this computer.granted by the Federal Communications Commission, to operate this computer.granted by the Federal Communications Commission, to
Appendices English 45 Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.this device may not cause harmful interference, and 2. this device must accept any interference received, in clud- ing interference that may cause undesired operation. this device must accept any interference received, ining interference that may cause undesired operation.this device must accept any interference received, in Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003. Remarque à l’intention des utilisateurs cana- diens Remarque à l’intention des utilisateurs cana- diens Remarque à l’intention des utilisateurs cana- Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries • EMC Direc tive 89/336/EEC (including amendments) • Low Voltage Directive 73/23/EEC (amended by 93/68/ EEC) • R & TTE Directive 1999/EC (if product has RF function)