Optoma Hd20 Projector User Manual

							
31

English

ser ontrols

SYSTEM
  Image AI
Image AI improves the contrast of the picture by optimizing the 
brightness of the lamp according to the picture content.
 On: The dynamic image performance manager is active in 
making sure your greatest pleasure from seeing a movie 
dynamically with the most dark details revealed, vivid and 
bright image performed all the way.
 Off: The dynamic image performance manager is on standby. 
						

							
32

ser ontrols

SYSTEM
  Test Pattern
Display a test pattern. There are Grid, White pattern and None.
  Background Color
Use this feature to display a “Dark Blue”, “Black”, or “G\
ray” screen 
when no signal is available.
  12V Trigger
12V trigger provides a standard trigger for motorized screens.
 “12V OUT” is only for trigger control. Not a power supplier port. 
 “12V OUT” is activated when the projector is turned on and continues to stay on till you turn off the projector.
NoteNote 
						

							
33

English

ser ontrols

SYSTEM |
Lamp Settings
  Lamp Hour
Display the cumulative lamp operating time. 
  Lamp Reminder
Choose this function to show or to hide the warning message 
when the changing lamp message is displayed. The message will 
appear up 30 hours before suggested replacement of lamp.
  Bright Mode
Choose “On” to increase the brightness. Choose “Off” to return 
normal mode.
  Lamp Reset
Reset the lamp life hour after replacing the lamp. 
						

							
34

ser ontrols

SETUP
  Language
Choose the multilingual OSD menu. Press  or  into the sub 
menu and then use the  or  key to select your preferred 
language. Press “Select (Enter)” to fi nalize the selection.
  Input Source
Use this option to enable / disable input sources. Press  to enter 
the sub menu and select which sources you require. Press “Enter” 
to finalize the selection. The projector will not search for inputs that 
are not selected. 
						

							
35

English

ser ontrols

  Source Lock
When this function is turned off, the projector will search for other 
signals if the current input signal is lost. When this function is 
turned on, it will search for a specifi ed connection port.
  High Altitude
Choose “On” to turn on High Altitude mode. Operates the fans at 
full speed continuously to allow for proper high altitude cooling of 
the projector.
  Auto Power Off (min)
Set the interval of power-off of the system, if there is no signal 
input.
  Color Space
Select an appropriate color matrix type from RGB or YCbCr.
  Reset
Return the adjustments and settings to factory default values.
 Current : Return the current menu’s settings to factory default.
All : Return the settings for all menus to factory default values.
SETUP 
						

							
36

ser ontrols

  Signal
 Phase: Change the display data frequency to match the 
frequency of your computer’s graphic card. When you 
experience a vertical fl ickering bar, use this function to 
make an adjustment.
 Tracking: Synchronize the signal timing of the display with 
the graphics card. If you experience an unstable or 
fl ickering image, use this function to correct it.
 H Position: Adjust the horizontal position.
 V Position: Adjust the vertical position.
 “Signal” is not supported when the source is HDMI or DVI-D.
NoteNote
SETUP | Signal
- RGB Source 
						

							
37

English

ser ontrols

  Signal
 White Level: Allow user adjust White Level when inputting 
S-Video or Video/CVBS signals.
 Black Level: Allow user adjust Black Level when inputting 
S-Video or Video/CVBS signals.
 Saturation: Adjust a video image from black and white to 
fully saturated color. Press the  to decrease 
the amount of color in the image. Press the  
to increase the amount of color in the image.
 Hue: Adjust the color balance of red and green. Press the  to 
increase the amount of green in the image. Press the  to 
increase the amount of red in the image.
 IRE: Adjust measurement of composite video signals.
SETUP | Signal
- Video Source
 “IRE” is only supported on NTSC signal.
NoteNote
 “Signal” is not supported when the source is HDMI or DVI-D.
NoteNote 
						

							
38

ppendices

 Image Problems
 No image appears on-screen
 Ensure all the cables and power connections are correctly and 
securely connected as described in the “Installation” section.
 Ensure all the pins of connectors are not bent or broken.
 Check if the projection lamp has been securely installed. Please 
refer to the “Replacing the lamp” section.
 Make sure you have removed the lens cap and the projector is 
switched on.
 Image is out of focus
  Make sure the lens cap is removed.
  Adjust the Focus Ring on the projector lens. 
  Make sure the projection screen is between the required distance 
4.89 to 32.68 feet (1.49 to 9.96 meters) from the projector. 
See page 16.
 The image is stretched when displaying 16:9 DVD title
 When you play anamorphic DVD or 16:9 DVD, the projector will 
show the best image in 16:9 format on projector side.
  If you play the LBX format DVD title, please change the format as 
LBX in projector OSD.
 If you play 4:3 format DVD titles, please change the format to 4:3 in 
the projector OSD.
 If the image is still stretched, you will also need to adjust the aspect\
 
ratio by referring to the following:
 Please setup the display format as 16:9 (wide) aspect ratio type on 
your DVD player.
 Troubleshooting
 If you experience a problem with your projector, 
please refer to the following information. If a 
problem persists, please contact your local 
reseller or service center.  
						

							
39

English

ppendices

 Image is too small or too large
  Adjust the Zoom Ring on the top of the projector.
  Move the projector closer to or further from the screen.
  Press “Menu” button on the remote control or projector panel, go 
to “Display  Format” and try the different settings.
 Image has slanted sides
  If possible, reposition the projector so that it is horizontally 
centered on the screen and below the bottom of the screen.
 Image is reversed
  Select “SYSTEM  Projection” from the OSD and adjust the 
projection direction.
 
 Other Problems
 The projector stops responding to all controls
  If possible, turn off the projector, then unplug the power cord and 
wait at least 60 seconds before reconnecting power.
 Lamp burns out or makes a popping sound
 When the lamp reaches its end of life, it will burn out and may 
make a loud popping sound. If this happens, the projector will not 
turn on until the lamp module has been replaced. To replace the 
lamp, follow the procedures in the “Replacing the Lamp” section 
on pages 42-43.
  
						

							
40

ppendices

Projector Status Indication
 
 LED lighting message
Message
ON/STANDBY LEDTemp-LEDLamp-LED
(Green/Amber)(Red)(Red)
Standby State
(Input power cord)Amber
Power on (Warming)FlashingGreen
Lamp lightingGreen
Power off (Cooling) FlashingGreen
Error (Over Temp.)FlashingAmber
Error (Fan fail)FlashingAmberFlashing
Error (Lamp fail)FlashingAmber
Steady light  
No light  
*  ON/STANDBY LED be ON when OSD appears, be OFF when OSD disappears. 
NoteNote