Optoma Hd180 Projector User Manual

							
1

English

Table of Contents ........................................................................\
...........1
Usage Notice ........................................................................\
..................2
Safety Information ........................................................................\
.................2Precautions........................................................................\
............................3Eye Safety Warnings ........................................................................\
.............5
Introduction........................................................................\
.....................6
Package Overview........................................................................\
.................6Product Overview ........................................................................\
..................7Main Unit ........................................................................\
........................................7Control Panel ........................................................................\
.................................8Input / Output Connections ........................................................................\
............9Remote Control ........................................................................\
............................10 
Installation ........................................................................\
....................11
Connecting the Projector ........................................................................\
.....11Connect to Computer/Notebook ........................................................................\
..11Connect to Video Sources ........................................................................\
...........12
Powering On/Off the Projector .....................................................................13Powering On the Projector ........................................................................\
...........13Powering Off the projector ........................................................................\
...........14Warning Indicator ........................................................................\
.........................14Adjusting the Projected Image.....................................................................15Adjusting the Projector’s Height ........................................................................\
...15Adjusting the Projector’s Zoom / Focus ...............................................................16Adjusting Projected Image Size ........................................................................\
...16
User Controls ........................................................................\
...............17
Control Panel & Remote Control .................................................................17Control Panel ........................................................................\
...............................17Remote Control ........................................................................\
............................18On-screen Display Menus ........................................................................\
...20How to operate  ........................................................................\
............................20Menu Tree ........................................................................\
....................................21IMAGE ........................................................................\
.........................................24DISPLAY ........................................................................\
......................................26SYSTEM ........................................................................\
......................................30SETUP ........................................................................\
.........................................34
Appendices........................................................................\
...................38
Troubleshooting ........................................................................\
...................38Image Problems  ........................................................................\
..........................38Other Problems  ........................................................................\
...........................39Projector Status Indication  ........................................................................\
..........40Remote Control Problems  ........................................................................\
...........41Replacing the Lamp........................................................................\
.............42Compatibility Modes ........................................................................\
............44Ceiling Mount Installation ........................................................................\
....46Optoma Global Offi ces ........................................................................\
........47Regulation & Safety notices ........................................................................\
49 
able of contents 
						

							
2

sage otice

Safety Information
The lightning fl ash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous \
voltage” within the product’s enclosure that may be of suffi cient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.\
 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Class B emissions limitsThis Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Important Safety Instruction  1. Do not block any ventilation openings. To ensure reliable operation of the projector and to protect from over heating, it is recommended to install the projector in a location that does not block ventilation. As an example, do not place the projector on a crowded coffee table, sofa, bed, etc. Do not put the projector in an enclosure such as a book case or a cabinet that restricts air fl ow.  2. Do not use the projector near water or moisture. To reduce the risk of fi re and/or electric shock, do not expose the projector to rain or moisture.  3. Do not install near heat sources such as radiators, heaters, stoves or any other apparatus such as amplifi ers that emits heat.  4. Clean only with dry cloth.  5. Only use attachments/accessories specifi ed by the manufacturer.   6. Do not use the unit if it has been physically damaged or abused. Physical damage/abuse would be (but not limited to): Unit has been dropped. Power supply cord or plug has been damaged. Liquid has been spilled on to the projector. Projector has been exposed to rain or moisture. Something has fallen in the projector or something is loose inside.Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma before you send the unit for repair.  7. Do not let objects or liquids enter the projector. They may touch dangerous voltage points and short out parts that could result in fi re or electric shock.  8. See projector enclosure for safety related markings.  9. The unit should only be repaired by appropriate service personnel. 
						

							
3

English

sage otice

 When the lamp reaches the end of its life, the projector will not turn back on until the lamp module has 
been replaced. To replace the lamp, follow the procedures listed under “Replacing the Lamp” section 
on pages 42-43.
 Precautions
 
Please follow all warnings, precautions and 
maintenance as recommended in this user’s 
guide.
▀■ Warning- Do not look into the projector’s lens when the lamp is 
on. The bright light may hurt your eyes.
▀■ Warning- To reduce the risk of fi re or electric shock, do not 
expose this projector to rain or moisture.
▀■ Warning- Please do not open or disassemble the projector as 
this may cause electric shock.
▀■ Warning- When replacing the lamp, please allow the unit to 
cool down. Follow instructions as described on pages 
42-43.
▀■ Warning- This projector will detect the life of the lamp itself. 
Please be sure to change the lamp when it shows 
warning messages.
▀■  Warning- Reset the “Lamp Reset” function from the on-screen 
display “System | Lamp Settings” menu after 
replacing the lamp module (refer to page 33).
▀■ Warning- When switching the projector off, please ensure 
the cooling cycle has been completed before 
disconnecting power. Allow 90 seconds for the 
projector to cool down.
▀■ Warning- Do not use lens cap when projector is in operation.
▀■ Warning- When the lamp is approaching the end of its lifetime, 
the message “Replacement suggested” will show on 
the screen. Please contact your local reseller or ser-
vice center to change the lamp as soon as possible.
NoteNote 
						

							
4

sage otice

Do:
  Turn off and unplug the power plug from the AC outlet before 
cleaning the product.
  Use a soft dry cloth with mild detergent to clean the display 
housing.
  Disconnect the power plug from AC outlet if the product is 
not being used for a long period of time.
Do not:
  Block the slots and openings on the unit provided for 
ventilation.
  Use abrasive cleaners, waxes or solvents to clean the unit.
  Use under the following conditions:
  -  In extremely hot, cold or humid environments.
  Ensure that the ambient room temperature is within 
5 - 35°C.
  Relative Humidity is 5 - 35°C, 80% (Max.), 
non-condensing.
    - In areas susceptible to excessive dust and dirt.
    - Near any appliance generating a strong magnetic fi eld.
    -  In direct sunlight.  
						

							
5

English

sage otice

Eye Safety Warnings
 
▀■ Avoid staring/facing directly into the projector beam at all 
times. Keep your back to the beam as much as possible.
▀■ When projector is used in a classroom, adequately supervise 
students when they are asked to point out something on the 
screen.
▀■ In order to minimize the lamp power, use room blinds to re-
duce ambient light levels.  
						

							
6

ntroduction

Power Cord 1.8m
IR Remote Control
 Package Overview
Unpack and inspect the box contents to ensure 
all parts listed below are in the box. If something 
is missing, please contact your nearest customer 
service center.
Documentation : 
 User’s Manual
 Warranty Card
 Quick Start Card
 WEEE Card  (for EMEA only)
 Due to different applications in each country, some regions may have different accessories.
2 × AAA Batteries
Projector with lens cap 
POWERSOURCE
NoteNote
Lamp 
						

							
7

English

ntroduction

1.  Control Panel
2.  Zoom Ring
3.  Focus Ring
4.  Zoom Lens
5.  IR Receivers
Main Unit
  Product Overview
6.  Tilt-Adjustment Feet
7.  Security Bar
8.  Input / Output 
Connections
9.  Power Socket
SERVICEVGA/SCART/YPbPrYVIDEO
PbPrHDMI 1HDMI 212VOUT
POWERSOURCE
786
POWER
SOURCE
2
6
5
3
4
15
9 
						

							
8

ntroduction

 Control Panel
1.  Source
2.  Menu 
3.  Enter
4.  Re-Sync
5.  Power
6.  Four Directional Select Keys
7.  On/Standby LED 
8.  Lamp Fail LED  
9.  Temp LED
10. IR Receiver
POWERSOURCE
6
51234
987
10 
						

							
9

English

ntroduction

Input / Output  Connections
1.  Service Connector 
2.  VGA/SCART Connector 
(PC Analog Signal/Component Video Input/HDTV/SCART) 
3.  Component Video Input Connectors
4.  Composite Video Input Connector
5. HDMI 1 Connector
6. HDMI 2 Connector
7.  12V Trigger Relay Connector
8.  Power Socket
9.  KensingtonTM Lock Port 
10. Security Bar
EnglishEnglishEnglish
SERVICE
VGA/SCART/YPbPr
YVIDEO
PbPr
HDMI 1HDMI 212V OUT
574216
8109
3
 “12V OUT” is only for trigger control. Not a power 
supplier port. 
 “12V OUT” is activated when the projector is turned on and continues to stay on till you turn off the projector.
NoteNote 
						

							
10

ntroduction
Remote Control
1.  Power On
2.  Power Off
3.  16:9
4.  Native
5.  Contrast
6.  Overscan
7.  Enter
8.   Re-Sync
9.  D-Sub Source
10. Video Source
11.  HDMI 2 Source
12. YPbPr Source
13. HDMI 1 Source
14. Menu
15. Source
16. Source Lock
17. EdgeMask
18. Brightness
19. LBX
20. 4:3
21. Lamp Mode
22. Mode
23. Four Directional Select 
Keys  
Lamp
1
2
3
4
5
6
9
10
13
17
18
19
22
12
20
21
11
7
8
23
15
14
16