Optoma Hd131x Projector User Manual

31English
User Controls
Please note that the on-screen display (OSD) menus vary according to the  ™signal type selected and the projector model you are using.( ™#1) “Color” and “Tint” are only supported in Video mode. ( ™#2) “3D Sync Invert” is only available when 3D is enabled. 
HD25 OSD Menu Tree.xls
Main Menu Sub MenuSettings
SetupAudio Settings Internal Speaker On / Off
Mute On / Off
SRS On / Off
Volume 0~10
Treble 0~10
Bass 0~10
Audio Input Default / Audio1 / Audio2
Security Security...

32English
User Controls
IMAGE
Display Mode
There are many factory presets optimized for various types of  
images.
Cinema: For home theater. `
Bright: Maximum brightness from PC input. `
Photo: Optimized for displaying photographic images. `
Reference: This mode is intended to reproduce, as close as  `
possible, the image the way the movie director intended. Color, 
color temperature, brightness, contrast and gamma settings are 
all configured to standard reference levels. 
User: User’s settings. `
3D:...

33English
User Controls
Color
Adjust a video image from black and white to fully saturated color.
Press the ◄ to decrease the color saturation in the image. `
Press the ► to increase the color saturation in the image. `
Tint
Adjust the color balance of red and green.
Press the ◄ to increase the amount of green in the image. `
Press the ► to increase the amount of red in the image. `“Color” and “Tint”  ™are only support-ed for composite and component sources. 

34English
User Controls
IMAGE | Advanced
Noise Reduction
The Noise Reduction reduces the amount of visible noise inter-
laced signals. The range is from “0” to “10”. (0: Off)
Gamma
This allows you to set up gamma curve type. After the initial setup 
and fine tuning is completed, utilize the Gamma Adjustment steps 
to optimize your image output.
Film: for home theater. `
Video: for video or TV source. `
Standard: for standardized setting. `
Graphics: for PC / Photo source. `
BrilliantColor™
This...

35English
User Controls
Color Settings
Press ► into the next menu and then use ▲ or ▼ or ◄ or ►to 
select item.
Color Settings
Red
Green
Blue
White Cyan
Magenta
Yellow
     Reset  
 Exit
Red/Green/Blue/Cyan/Magenta/Yellow `: Use ◄ or ► to select 
Hue, Saturation and Gain Colors.
Red
Hue
 Exit
Saturation
Gain
White `: Use ◄ or ► to select Red, Green and Blue Colors.
WhiteRed
 Exit
Green
Blue
Reset: Choose “ ` Reset” to return the factory default settings 
for color adjustments.
Color Space
Select an...

36English
User Controls
IMAGE | Advanced  
| Signal (VGA)
Automatic
Automatically configures the signal (the Frequency and Phase 
items are grayed out). If Automatic is disabled, the Frequency and 
Phase items will appear for user to manually tune and save the 
settings.
Phase
Synchronize the signal timing of the display with the graphic card. 
If the image appears to be unstable or flickers, use this function to 
correct it.
Frequency
Change the display data frequency to match the frequency of your...

37English
User Controls
IMAGE | Advanced 
| Signal (Video)
White Level
Allow user adjust White Level when inputting Video signals.
Black Level
Allow user adjust Black Level when inputting Video signals.
Saturation
Adjust a video image from black and white to fully saturated color.
Press the ◄ to decrease the amount of color in the image. `
Press the ► to increase the amount of color in the image. `
Hue
Adjust the color balance of red and green.
Press the ◄ to increase the amount of green in the image....

38English
User Controls
DISPLAY
Format
Use this function to choose your desired aspect ratio.
4:3: This format is for 4x3 input sources. `
16:9: This format is for 16x9 input sources, like HDTV and  `
DVD enhanced for Widescreen TV.
LBX: This format is for non-16x9, letterbox source and for us- `
ers who use external anamorphic lens to display 2.35:1 aspect 
ratio using full resolution. 
Native: This format displays the original image without scaling. `
AUTO: Automatically selects the appropriate display...

39English
User Controls
Each I/O has differ- ™ent setting of “Edge Mask”.“Edge Mask” and  ™“Zoom” can’t work at same time.
16:9 Screen480i/p576i/p1080i/p720pPC
4:3 1440 x 1080 center
16:91920 x 1080 center
LBX1920 x 1440 center, then get the central 1920 x 1080 image to display
NativeNo resize image, 1:1 mapping and centered. This format shows original image without scaling.
Auto
If this format is select, Screen type will auto become 16:9 (1920x1080)If source is 4:3, auto resize to 1440 x1080If...

40English
User Controls
“3D sync. Invert” func- ™tion wouldn’t save the setting. It will set to “Off” when powers on and changes source. 
3D Format is only sup- ™ported on 3D Timing on page 58.“3D Format” is only  ™supported on non-HDMI 1.4a 3D timing.
DISPLAY | 3D 
 3D Mode
DLP-Link: Select “DLP-Link” to use optimized settings for DLP  `
Link 3D Glasses. (refer to page 17).
VESA 3D: Select “VESA 3D” to use optimized setting for VESA  `
3D Glasses. (refer to page 17).
3D -> 2D
3D: Display...