Optoma Gt 7000 Projector User Manual

							
English

Introduction

Remote Control
1. Power On/Off
2. Mode
3. 16:9
4. Native
5. Contrast
6. Menu Format
7. Enter
8. Four Directional Select 
Keys 
9.  Re-Sync
10. D-Sub Source
11. Video Source
12. YPbPr Source
13. HDMI Source
14. Source
15. EdgeMask
16. Brightness
17. LBX
18. 4:3
19. Overscan
20. V Keystone
21. S-Video Source
22. Source Lock
1
2
3
4
5
6
8
9
7
10
11
21
13
15
16
17
20
12
18
19
14
22 
						

							
2English

Installation

12VTRIGGER
DVDplayer,Set-topBoxHDTVreceiver
VGA,DVI
VideoOutputS-VideoOutput

Connecting the Projector
	Due to the  difference in applications for each country, some regions may have different accessories.
1...............................................................................................................Power Cord2..................................................................S-Video Cable (EMEA and Asia only)3........................................................................................VGA Cable (EMEA only)4........................................................................RCA Component Cable for YPbPr 5........................................................Composite Video Cable (Asia and US only)6......................................................................HDMI Cable (Optional accessories)7..........................................................................USB Cable (Optional accessories)
1
32
6
5
7
4 
						

							
3English

Installation

Powering On the Projector
1. Remove the lens cap. 
2. Ensure that the power cord and signal cable are securely 
connected.  The Power LED will be red.
3. Turn on the lamp by pressing “Power/Standby” button ei-
ther on the top of the projector or on the remote. The Power 
LED will flash green.
 The startup screen will display in approximately 10 seconds. 
The first time you use the projector, you can select your 
preferred language from quick menu after the startup screen 
display.
4. Turn on your source (computer, notebook, video player, 
etc.). The projector will detect your source automatically.
	If the screen displays “No Signal”, please make sure the signal 
cables are securely connected.
	If you connect multiple sources at the same time, press the 
“Source” button on the control panel or direct source key on the 
remote control to switch between inputs.
Powering On/Off the Projector
	Turn on the projector first and then select the signal sources.
2Power
Lens Cap1
Power LED 
						

							
4English

Installation

Warning Indicator
 When the “LAMP” indicator lights red, it indicates problem 
with the lamp. Please contact your local reseller or service 
center. See pages 48-49. 
 When the “TEMP” indicator lights red, it indicates the pro-
jector has overheated. The projector will automatically shut 
itself down.
  Under normal conditions, the projector can be switched on 
again after it has cooled down. If the problem persists, you 
should contact your local dealer or our service center. 
See pages 48-49. 
 When the “POWER” indicator flashes red, it indicates the 
fan has failed. Please contact your local dealer or our service 
center. See pages 48-49. 
Powering Off the Projector
1.   Press the “Power” button to turn off the projector lamp, 
you will see a message displayed on the projector’s screen. 
2.  Press the “Power” button again to confirm,  
otherwise the message will disappear after 5 seconds.
 When you press “Power” button second, the system will 
show the timing countdown on the screen. 
3. The cooling fans continue to operate for about 10 seconds 
for cooling cycle. When the Power LED turn red, the pro-
jector has entered standby mode.
	If you wish to turn the projector back on, you must wait until 
the projector has completed the cooling cycle and has entered 
standby mode. Once in standby mode, simply press “Power” 
button to restart the projector.
4. Disconnect the power cord from the electrical outlet and 
the projector.
5. Do not turn on the projector immediately following a 
power off procedure. 
						

							
5English

Installation

Adjusting the Projected Image
Adjusting the Projector’s Height
The projector is equipped with elevator foot for  
adjusting the image height.
 To raise the image:
1. Press the elevator button . 
2. Raise the image to the desired height angle , then release 
the button to lock the elevator foot into position.
3. Use screw in foot  to fine-tune the display angle. 
 To lower the image:
1. Press the elevator button.
2. Lower the image, then release the button to lock the  
 elevator feet into position.
3. Use screw in foot  to fine-tune the display angle.
Tilt-Adjustment Foot
Elevator Foot
3
2
Elevator Button
1 
						

							
6English

Installation
Adjusting the Projector’s Zoom / Focus
Adjusting Projection Image Size
You  may  turn  the  zoom  lever  to  zoom  in  or  out.  To  focus  the  
image, rotate the focus ring until the image is clear. The projector 
will focus at distances from 3.9 to 39.4 feet (1.2 to 12.0 meters). 
WidthHeightDiagonal
Screen
Screen
Projection Distance (D)
Projection Distance (D)
Screen (W)
Screen (H)
Offset (Hd)
Top View
	This graph is for user’s reference only.
Focus Ring
Zoom Ring
Diagonallength (inch) size of 16:9 Screen
Screen Size W X H (16:9)Projection distance (D)Offset(Hd)(m)(feet)(m)(feet)widetelewidetele(m)(feet)501.110.623.632.041.721.885.646.170.120.39601.330.754.362.452.062.266.767.410.140.47701.550.875.082.862.402.637.878.630.170.54801.771.005.813.272.753.019.029.880.190.62901.991.126.543.683.093.3910.1411.120.210.701002.211.257.264.093.433.7611.2512.340.240.781202.661.498.724.904.124.5213.5214.830.280.931503.221.8710.576.135.155.6516.9018.540.351.162004.422.4914.538.176.867.5322.5124.710.471.553006.643.7421.7912.2610.2911.2933.7637.040.712.33                                                                                                                          
						

							
7English

User Controls
Control Panel
Control Panel & Remote Control
There are two ways for you to control the functions:  
Control Panel and Remote Control.
Using the Control Panel
PowerRefer to the “Power On/Off the Projector” section 
on pages 13-14.
MenuPress “Menu” to launch the on-screen display 
(OSD) menu. To exit OSD, Press “Menu” again.
EnterConfirm your item selection.
AV MuteMomentarily turns off/on the audio and video.
SourcePress “Source” to select the input signal source at 
the next terminal.
Re-SyncAutomatically synchronize the projector to the 
input source.
Four Directional 
Select Keys
Use     to select items or make adjustments 
to your selection.
  Power LEDIndicate the projector’s status.
  Lamp LEDIndicate the projector’s lamp status.
   Temp LEDIndicate the projector’s temperature status.  
						

							
8English

User Controls

Remote Control
Using the Remote Control
PowerRefer to the “Power On/Off the Projector” section on pages 13-14.
ModeSelect the display mode from Cinema,
Bright, TV, Photo and User.
16:9Scale the image at a 16:9 aspect ratio.
NativeThe input source will be displayed without 
scaling.
ContrastControl the degree of difference between 
the lightest and darkest parts of the pic-
ture.
MenuPress “Menu” to launch the on-screen 
display (OSD) menu. To exit OSD, Press 
”Menu” again.
Re-Sync Automatically synchronizes the projector 
to the input source.
D-SubPress “D-Sub” to choose D-Sub (15 pins) 
connector source.
VideoPress “Video” to choose Composite video   
source.
Source LockSelect auto detection all connector ports or 
lock current connector port.
S-VideoPress “S-Video” to choose S-Video source.
YPbPrPress “YPbPr” to choose Component video 
source.
HDMIPress “HDMI” to choose source from 
HDMI connector.
SourcePress “Source” to select the input signal 
source at the next terminal. 
						

							
9English

User Controls

Remote Control
EdgeMaskMask  off  a  few  pixels  on  each  edge  of  the 
image  to  be  displayed.  Use  this  function 
to  adjust  if  image  source  happens  to  have 
noise near any edge of the display image.
Brightness Adjust the brightness of the image.
Letter-BoxEnable the viewing of the letterboxed non-
anamorphically enhanced movie at full 
screen width. Part of the original image 
will be lost if the image aspect ratio is less 
than 1.78:1.
4:3Scale the image at a 4:3 aspect ratio.
OverscanZoom the projector display in or out.
V. KeystoneA d j u s t  i m a g e  d i s t o r t i o n v e r t i c a l l y  a n d 
makes a squarer image.
Four Direc-
tional Select 
Keys
Use        to select items or make 
adjustments to your selection.
EnterConfirm your item selection. 
						

							
20English

User Controls

The Projector has multilingual On-screen Display menus 
that allow you to make image adjustments and change a 
variety of settings. The projector will automatically detect 
the source. 
How to operate 
1. To open the OSD menu, press “Menu” on the Remote Control or 
Projector Keypad.
2  When OSD is displayed, use   keys to select any item in the 
main menu. While making a selection on a particular page, press 
 or “Enter” key to enter sub menu.
3. Use   keys to select the desired item and adjust the settings 
by   key.
4. Select the next item to be adjusted in the sub menu and adjust as 
described above.
5. Press “Enter” to confirm, and the screen will return to the main 
menu.
6. To exit, press “Menu” again. The OSD menu will close and the 
projector will automatically save the new settings.
On-screen Display Menus
Main Menu
Sub MenuSetting