Optoma Ex765w Projector User Manual

2English

 User Controls
Control Panel
 Control Panel & Remote Control
There	are	two	ways	for	you	to	control	the	functions:	
Control	Panel	and	Remote	Control.
Using the Control Panel
 POWER / 
STANDBY
Power LED
Refer to the “Power On/Off the Projector” section on pages 5-6.
Indicate the projector’s status.
 / ? 
ENTER / HELP
Confi rm your item selection.
Help Menu (refer to page 24).
 MENUPress “MENU” to launch the on-screen display 
(OSD) menu. To exit OSD, Press “MENU” again....

22English

User Controls

RE-SYNCSOURCE
KEYSTONEVOLUME
POWERLASER
LEFTRIGHT
UP
DOWN
PAGE+
PAGE-
AV MUTEMENU
DVI-D
S-VIDEO
VGA-1
VIDEOVGA-2
HDMI

?
ZOOM

Remote Control
Using the Remote Control
POWER  
Refer to the “Power On/Off the Projector” 
section on pages 5-6.
LASER  
Aim the remote at the viewing screen, press 
and hold this button to activate the laser 
pointer.
PC/Mouse control
The PC/Mouse control can be used to 
control mouse movement. The mouse 
function is enabled using the USB...

23English

 User Controls

Remote Control
Using the Remote Control
MENU
Press “MENU” to launch the on-screen 
display (OSD) menu. To exit OSD, press 
“MENU” again.
ZOOM 
Zoom in on an image.
Press   buttons to alter zoom.
(This button has a different function on the 
wireless model.) 
DVI-DPress “DVI-D” to choose DVI-D source.
VGA-Press “VGA-” to choose source from 
VGA-IN/SCART connector.
AV MUTEMomentarily turns off/on the audio and 
video.
S-VIDEO Press “S-VIDEO” to choose S-Video...

24English

User Controls

UUSSBB
USB cableto USB portto USB port

 Using the USB Remote Mouse Control
The remote control can be used as remote mouse 
control by connecting the projector to the computer via 
USB cable.
SOURCERE-SYNC    ?/LAMPTEMPMENUPOWER    STANDBYENTER    HELP//
    ?/
ENTER    HELP/
Enter / Help 
ENT
 Using the ENTER / HELP button
Press the “ ” button on the control panel or on the 
remote control to open the Help Menu.  

25English

User Controls

 If no input source is detected and help button is pressed:
 If input source is detected and help button is pressed, the 
following pages will appear to help diagnose any problems. 

26English

User Controls 

27English

 User Controls

The	Projector	has	multilingual	On-screen	Display	menus	that	
allow	you	to	make	image	adjustments	and	change	a	variety	of	
settings.	The	projector	will	automatically	detect	the	source.	
How to operate 
.  To open the OSD menu, press “MENU” on the Remote Control or 
Projector Keypad.
2  When OSD is displayed, use   keys to select any item in the 
main menu. While making a selection on a particular page, press 
 or “Enter” key to enter sub menu.
3. Use   keys to select the...

28English

User Controls

Menu Tree
**
##
*
###
(WXGA)(XGA)
	(*) Only supported in WXGA model.
	(**) Only supported in XGA model.
	(#) “Display Type” is only supported in WXGA model. 
 	(##) “Signal” is only supported in Analog VGA (RGB) signal.
	(###) “Wireless” is only functional with optional wireless model. 
# 

29English

 User Controls

IMAGE
  Display Mode
There are many factory presets optimized for various types of 
images.
 Presentation: Good color and brightness from PC input.
 Bright: Maximum brightness from PC input.
 Movie: For home theater.
 sRGB: Standardised accurate color.
 User: User’s settings.
 User2: The initial default settings of this mode is from Movie 
mode. Any further adjustments by the user in User2 will be 
saved in this mode for future use. 
  Brightness
Adjust the...

30English

User Controls

  Hue
Adjust the color balance of red and green. 
 Press the  to increase the amount of green in the image. 
 Press the  to increase the amount of red in the image.
  Saturation
Adjust a video image from black and white to fully saturated color.
 Press the  to decrease the amount of saturation in the image.
 Press the  to increase the amount of saturation in the image.
  Gain
  Use  or  to adjust Red, Green, Blue, Cyan, Magenta and 
Yellow colors for brightness (Gain)....