Optoma Ex665utis Projector User Manual
Here you can view all the pages of manual Optoma Ex665utis Projector User Manual. The Optoma manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
21English User Controls Remote Control Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 15-16. L ButtonMouse left click. R ButtonMouse right click. Page +Use this button to page up. Page -Use this button to page down. Enter / Help Confirm your item selection. Help Menu (refer to page 23). SourcePress “Source” to select an input signal. Re-SYNC Automatically synchronizes the projector to the input source. Four Directional Select KeysUse to select items...
Page 22
22English User Controls Using the Remote Control AV muteMomentarily turns off/on the audio and video. S-Video Press “S-Video” to choose S-Video source. VGAPress “VGA” to choose VGA sources. VideoPress “Video” to choose Composite video source. Interactive Pen Using the Interactive Pen ON/OFF Power On/Off the Interactive Pen. LED Indicate the interactive pen’s status. LED Indicate the interactive pen’s battery con- sumption. Nib Press the nib to draw or write. Mouse Left Click Mouse left click....
Page 23
23English User Controls Using the HELP button The HELP function ensures easy setup and operation. Press the “?” button on the remote control or press the “HELP” button on the control panel to open the Help Menu.
Page 24
24English User Controls Help menu button functions only when no input source is detected. If input source is detected and help button is pressed, the following pages will appear to help diagnose any problems. Please refer to the “Troubleshooting” section on pages 70-75 for more details.
Page 26
26English User Controls The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. How to operate 1. To open the OSD menu, press “Menu” on the Remote Control or Projector Keypad. 2 When OSD is displayed, use keys to select any item in the main menu. While making a selection on a particular page, press or “Enter” key to enter sub menu. 3. Use keys to select the desired item and adjust the settings using key. 4. Select...
Page 27
27English User Controls Menu Tree EX665UTi OSD Menu Tree.xls Main Menu Sub MenuSettings ImageDisplay Mode Brightness-50~50 Contrast -50~50 Sharpness 1~15 Color -50~50 Tint -50~50 Advanced Gamma Film / Video / Graphics / PC BrilliantColor™ 0~10 Color Temp. Warm / Medium / Cold Color Settings Color Space AUTO / RGB / YUV Input Source VGA1 / VGA2 / Video / S-Video / HDMI Image AI On / Off Exit DisplayFormat 4:3 / 16:9-I / 16:9-II / Native / AUTO 4:3 / 16:9 or 16:10 / LBX / Native / AUTO Edge Mask 0~10 Zoom...
Page 28
28English User Controls EX665UTi OSD Menu Tree.xls Main Menu Sub MenuSettings SetupProjector ID0~99 Mute On / Off Volume 0~10 Audio Input Advanced Logo Optoma / Neutral / User Logo Capture Closed Captioning Off / CC1 / CC2 Exit Network Network State DHCP IP Address Subnet mask Gateway DNS Apply Yes / No Exit OptionsSource Lock On / Off High Altitude On / Off Information Hide On / Off Keypad Lock On / Off Background Color Black / Red / Blue / Green / White IR Receiver Front Receiver On / Off Top Receiver...
Page 29
29English User Controls Please note that the on-screen display (OSD) menus vary according to the signal type selected and the projector model you are using. (#1) “Color” and “Tint” are only supported in Video mode. (#2) For XGA model only. (#3) For WXGA model only. 16:9 or 16:10 depend on “Screen Type” setting. (#4) “3D Sync Invert” is only available when 3D is enabled. (#5) “Signal” is only supported in Analog VGA (RGB) signal. (#6) MIC volume can also be controlled by “Setup Volume”...
Page 30
30English User Controls IMAGE Display Mode There are many factory presets optimized for various types of images. Presentation: Good color and brightness from PC input. Bright: Maximum brightness from PC input. Movie: For home theater. sRGB: Standardised accurate color. Blackboard: This mode should be selected to achieve optimum color settings when projecting onto a blackboard (green). Classroom: This mode is recommended for projecting in a classroom. User: User’s settings. 3D:...