Home > Optoma > Projector > Optoma Ex551 Projector User Manual

Optoma Ex551 Projector User Manual

Here you can view all the pages of manual Optoma Ex551 Projector User Manual. The Optoma manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 31

EN-31 Source Lock
„On: The projector will search specified connection port.
„Off: The projector will search for other signals if the current input signal is 
lost.
Bright Mode
„ECO: Choose “ECO” to dim the projector lamp which will lower power 
consumption and extend the lamp life by up to 120%.
„Bright: Choose “Bright” to increase the brightness.
High Altitude
Use this function to allow the fans operates at full speed continuously to
achieve proper high altitude cooling of the projector.
OSD Timeout...

Page 32

 EN-32
Language
Select the language used by the on-screen menu.
Factory Default
Restore settings to factory default . 

Page 33

EN-33
Appendix
Replacing the Lamp
As the projector operates over time, the brightness of the projector lamp 
gradually decreases and the lamp becomes more susceptible to breakage. 
We recommend replacing the lamp if a warning message is displayed. Do 
not attempt to replace the lamp yourself. Contact the qualified service 
personnel for replacement.
Note
„The lamp is extremely hot right after turning off the projector. If you touch the lamp, you may
scald your finger. When you replace the lamp, wait for...

Page 34

 EN-34
1. Turn off the projector.
2. If the projector is installed in a ceiling mount, remove it
3. Unplug the power cord.
4. Remove the screw in the side of the lamp cover. 1
5. Remove the cover. 2
6. Loosen the screws from the lamp module. 3
7. Raise the handle, and lift out the module. 4
8. Insert the new lamp module into the projector and tighten the screws.
9. Replace the lamp cover and tighten the screw.
10. Turn on the projector.  If the lamp does not turn on after the warm-up 
period, try...

Page 35

EN-35
Ceiling mount installation
1. To prevent damage to your projector, please use the Optoma ceiling 
mount.
2. If you wish to use a third party ceiling mount kit, please ensure the screws 
used to attach a mount to the projector meet the following specifications:
„Screw type: M4*3
„Maximum screw length: 8mm
„Minimum screw length: 6mm
Note
„Please note that damage resulting from incorrect installation will void the warranty.
Warning
1.If you buy a ceiling mount from another company, please be sure to...

Page 36

 EN-36
Compatibility Modes
Computer: 
Mode Resolution H-Sync [KHz] V-Sync [Hz]
640 x 350 31.5 70
640 x 350 37.9 85
720 x 350 31.5 70
640 x 400 31.5 70
640 x 400 37.9 85.1
720 x 400 31.5 70
720 x 400 37.9 85
720 x 576 - 50
720 x 576 - 60
VGA 640 x 480 31.5 60
-67
37.9 72.8
37.5 75
43.3 85
SVGA 800 x 600 35.2 56.3
37.9 60.3
46.9 75
48.1 72.2
-80
53.7 85.1
832 x 624 - 72
832 x 624 - 75
1024 x 576 - 50
1024 x 576 - 60
XGA 1024 x 768 48.4 60
56.5 70.1
57.7 72
60 75
68.7 85
1152 x 864 - 60
-70
-75
-85
1152 x...

Page 37

EN-37
WXGA-800 1280 x 800 - 60
SXGA 1280 x 1024 64 60
80 75
91.1 85
1366 x 768 - 60
1440 x 900 55.935 60
SXGA+ 1400 x 1050 - 60
UXGA 1600 x 1200 75 60
HDTV 1920 x 1080 33.8 30
1920 x 1080 28.1 25
1920 x 1080i - 50
1920 x 1080i - 60
1920 x 1080p - 24
1920 x 1080p - 25
1920 x 1080p - 30
1920 x 1080p - 50
1920 x 1080p - 60
1280 x 720 45 60
1280 x 720p - 50
1280 x 720p - 60
SDTV 720 x 576 31.3 50
720 x 576i - 50
720 x 576p - 50
720 x 480 31.5 60
720 x 480i - 60
720 x 480p - 60
Macbook/Macbook 
Pro (Intel)800...

Page 38

 EN-38
Video: 
NTSC NTSC M/J, 3.58MHz, 4.43MHz
PAL PAL B/D/G/H/I/M/N, 4.43MHz
SECAM SECAM B/D/G/K/K1/L, 4.25/4.4 MHz
SDTV 480i/p, 576i/p
HDTV 720p(50/60Hz), 1080i(50/60Hz), 1080P(50/60Hz) 

Page 39

EN-39
RS232 Commands and Protocol Function 
List
RS232 Pin Assignments
D-Sub 9 pin
11 CD
2RXD
3TXD
4DTR
5GND
6DSR
7RTS
8CTS
9RI
Wire List
C1 COLOR C2
1 Black 1
2Brown 2
3Red 3
4Orange 4
5 Yellow 5
6 Green 6
7Blue 7
8 Purple 8
9White 9
SHELL DW SHELL 

Page 40

 EN-40
RS232 Protocol Function List
Note
„There is a  after all ASCII commands.
„0D is the HEX code for  in ASCII code.
Baud Rate : 9600 
Data Bits: 8  
Parity: None
St op  Bits:  1
Flow Control : None
UART16550 FIFO: Disable
Projector Return (Pass): P 
Projector Return (Fail): F XX=01-99, projectors ID,
XX=00 is for all projectors
SEND to projector
232 ASCII Code HEX Code Function  Description
~XX00 1 7E 30 30 30 30 20 31 0D Power ON
~XX00 0 7E 30 30 30 30 20 30 0D Power OFF (0/2 for backward...
Start reading Optoma Ex551 Projector User Manual

Related Manuals for Optoma Ex551 Projector User Manual

All Optoma manuals