Optoma Ex532 Projector User Manual

English


Control Panel
.  Keystone +
.  Keystone -
.  SourceRe-Sync . Enter/HelpMenuAV-Mute
PowerLampTemp
Power
Using the Control Panel
▲/Keystone+ 
(Up arrow)
•Adjust the image Keystone positively.
•Navigates and changes settings in the OSD.
◄/Source 
(Left arrow)
•Press Source to select an input signal.
•Navigates and changes settings in the OSD.
Enter / Help
Confirm your item selection./ 
Press to activate Help function  
(disabled in OSD menus).
See page 51 Appendices for help function....

English


Remote Control
Using the Remote Control
PowerRefer  to  the  “Power  On/Off  the 
Projector” section on page 15.
Laser
Aim  the  remote  at  the  viewing  screen, 
press  and  hold  this  button  to  activate 
the laser pointer.
Four 
Directional 
Select Keys
Use  ▲▼◄►  to  select  items  or  make 
adjustments to your selection.
PC / Mouse 
control
The PC/Mouse control can be used to 
control mouse movement. The mouse 
function is enabled using the USB  
cable to connect your...

English


Using the Remote Control
BrightnessAdjust the brightness of the image.
Menu
Press Menu to launch the on-screen 
display  (OSD)  menu.  To  exit  OSD, 
Press Menu again.
ZoomPress +/- to zoom in of an image.
ContrastPress Contrast to adjust the contrast 
of the image.
FreezePress Freeze to pause the screen image.
AV MuteMomentarily turns off/on the audio 
and video.
S-VideoPress S-Video  to  choose  S-Video 
source.
VGAPress VGA  to  choose  source  from 
VGA- IN connector.
VideoPress...

English


On-screen Display Menus
The  Projector  has  multilingual  On-screen  Display  menus  that  allow  you  to make image adjustments and change a variety of settings. The projector will 
automatically detect the source.
How to operate
1.  To  open  the  OSD  menu,  press Menu  on  the  Remote  Control  or 
Projector Keypad.
2.  When  OSD  is  displayed,  use  ◄►  keys  to  select  any  item  in  the 
main menu. While making a selection on a particular page, press 
▼ or Enter to enter...

English


Menu Tree
User Controls 

English


Image
Display Mode
There are many factory presets optimized for various types of images.
4 Presentation: Good color and brightness from PC input.
4 Bright: Maximum brightness from PC input.
4 Movie: For home theater.
4 sRGB: Standardised accurate color.
4 Blackboard: Tuned for blackboard usage.
4 Classroom: Recommended settings for classroom.
4 User1: User’s own settings.
4 User2: User’s own settings.The initial default settings of this mode is from Movie mode.  Any further...

English


Image
Saturation
Adjusts a video image from black and white to full color saturation.
4 Press ◄ to decrease the amount of saturation in the image.
4 Press ► to increase the amount of saturation in the image.
Tint
Adjusts the color balance of red and green.
4 Press ◄ to increase the amount of green in the image.
4 Press ► to increase the amount of red in the image.
Color Setting
Enter the Color Setting menu. Select the Red/Green/Blue Gain for  brightness adjustments and Bias for...

English


Image | Color Setting
Gain
Set RGB Gain to adjust the Brightness of the following Colors:
4 Red—increase or decrease the gain value for red.
4 Green—increase or decrease the gain value for green.
4 Blue—increase or decrease the gain value for blue.
Bias
Set RGB Bias to adjust the Contrast of the following Colors:
4 Red—increase or decrease the bias value for red.
4 Green—increase or decrease the bias value for green.
4 Blue—increase or decrease the bias value for blue.
Color
Set...

English


Image | Advanced
BrilliantColorTM
This adjustable item utilizes a new color-processing algorithm and  system level enhancements to enable higher brightness while providing true, more vibrant colors in picture. The range is from 0 to 10. If you  prefer a stronger enhanced image, adjust toward the maximum setting. For a smoother, more natural image, adjust toward the minimum setting.
Degamma
This  allows  you  to  choose  a  degamma  table  that  has  been  fine-tuned  to bring out the...

English
0

Image | Advanced | Input Source
Input Source
Use this option to enable / disable input sources. Press ▲ or ▼ to select a source, then press ◄ or ► to enable / disable it. Press Enter to finalize the selection. The projector will not search inputs that are de-selected\
.v If all sources 
are deselected, 
the projector 
cannot display 
any images. 
Always leave at 
least one source 
selected.
User Controls
v Function is  
dependent on 
the model  
purchased.