Optoma Dw318 Projector User Manual
Have a look at the manual Optoma Dw318 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1077 Optoma manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
21English User Controls Menu Tree ## (#) “Saturation” and “Tint” are only supported in Video mode. (##) “Signal” is only supported in Analog VGA (RGB) signal. (*) "3D" is supported at 1280x720 resolution maximum. (**) "3D Sync. Invert" is only available when 3D is enabled. ## ***
22English User Controls IMAGE Display Mode There are many factory presets optimized for various types of images. Presentation: Good color and brightness from PC input. Bright: Maximum brightness from PC input. Movie: For home theater. sRGB: Standardised accurate color. Blackboard: This mode should be selected to achieve optimum color settings when projecting onto a blackboard (green). Classroom: This mode is recommended for projecting in a classroom. User: User’s settings. User2: The initial default settings of this mode is from Movie mode. Any further adjustments by the user in User2 will be saved in this mode for future use. Brightness Adjust the brightness of the image. Press the to darken image. Press the to lighten the image.
23English User Controls IMAGE Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. Press the to decrease the contrast. Press the to increase the contrast. Sharpness Adjust the sharpness of the image. Press the to decrease the sharpness. Press the to increase the sharpness. Saturation Adjust a video image from black and white to fully saturated color. Press the to decrease the amount of saturation in the image. Press the to increase the amount of saturation in the image. Tint Adjust the color balance of red and green. Press the to increase the amount of green in the image. Press the to increase the amount of red in the image. “Saturation” and “Tint” functions are only supported under Video mode.
24English User Controls IMAGE | Advanced Degamma This allows you to choose a degamma table that has been fine-tuned to bring out the best image quality for the input. Film: for home theater. Video: for video or TV source. Graphics: for image source. PC: for PC or computer source. BrilliantColor™ This adjustable item utilizes a new color-processing algorithm and system level enhancements to enable higher brightness while providing true, more vibrant colors in picture. The range is from “0” to “0”. If you prefer a stronger enhanced image, adjust toward the maximum setting. For a smoother, more natural image, adjust toward the minimum setting. Color Temp If set to cold temperature, the image looks more blue. (cold image) If set to warm temperature, the image looks more red. (warm image) Color Space Select an appropriate color matrix type from AUTO, RGB or YUV.
25English User Controls Advanced | Color Settings Color Use these settings for advanced adjustment of the individual Red, Green, Blue, Cyan, Magenta and Yellow Colors. Reset Choose “Yes” to return the factory default settings for color adjustments. Advanced | Input Source Input Source Use this option to enable / disable input sources. Press to enter the sub menu and select which sources you require. Press “Enter” to finalize the selection. The projector will not search for inputs that are not selected.
26English User Controls DISPLAY Format Use this function to choose your desired aspect ratio. 4:3: This format is for 4×3 input sources. 6:0: This format is for 6×0 input sources, like HDTV and DVD enhanced for Wide screen TV. LBX: This format is for non-6x9, letterbox source and for users who use external 6x9 lens to display 2.35: aspect ratio using full resolution. Native: This format displays the original image without any scaling. AUTO: Automatically selects the appropriate display format. Aspect ratio (source detected) Resize image 4:3 066 x 800 center 6:9 280 x 720 center 5:9 280 x 768 center 6:0 280 x 800 center
27English User Controls Input Signal Display area Picture area Display on Screen 4:3 format 6:0 formator LBX format Native format
28English User Controls Overscan Overscan function removes the noise in a video image. Overscan the image to remove video encoding noise on the edge of video source. Zoom Press the to reduce the size of an image. Press the to magnify an image on the projection screen. H Image Shift Shift the projected image position horizontally. V Image Shift Shift the projected image position vertically. V Keystone Press the or to adjust image distortion vertically and makes a rectangular image. 3D Choose the “On” to turn this item on fi rst if for 3D images. 3D Sync. Invert When you discover the inversion of the image depth, enable this function to correct the problem. DISPLAY "3D" is supported at 280x720 resolution maximum. "3D Sync. Invert" is only available when 3D is enabled.
29English User Controls Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language. Press “Enter” to fi nalize the selection. SETUP | Language
30English User Controls SETUP Projection Front-Desktop This is the default selection. The image is projected straight on the screen. Rear-Desktop When selected, the image will appear reversed. Front-Ceiling When selected, the image will turn upside down. Rear-Ceiling When selected, the image will appear reversed in upside down position. Rear-Desktop and Rear-Ceiling are to be used with a translucent screen.