Optoma Ds316l Projector User Manual

11English
Installation
VGA1-IN/SCART S-VIDEO RS232
VIDEOAUDIO-INAUDIO-OUT
E62405SPR
Connecting the Projector
	 Due to the 
difference in 
applications 
for each 
country, some 
regions may 
have different 
accessories.
	 (*) Optional 
accessory 
Connect to Computer/Notebook
1
3
1.................................................................................................... Power Cord
2. .................................................................................................. *VGA Cable
3....

12
English
Installation
VGA1-IN/SCART S-VIDEO RS232
VIDEOAUDIO-INAUDIO-OUT
E62405SPR
Connect to Video Sources
1. ................................................................................................... Power Cord
2. .................................................................................................. *VGA Cable 
3. ............................................................................... *Composite Video Cable
4...

13English
Installation
Powering On the Projector
1. Securely connect the power cord and signal cable. When 
connected, the Power LED will turn Red.  
2.  Turn on the lamp by pressing “ON/STAND-BY” button either 
on the top of the projector or on the remote. The Power LED 
will now turn Blue.  
  The startup screen will display in approximately 10 seconds. 
The first time you use the projector, you can select your 
preferred language from quick menu after the startup screen 
displays.
3.  Turn on and...

14
English
Installation
Powering  Off the Projector
1.  Press the “ON/STAND-BY” button to turn off the projec-
tor lamp. The following message will be displayed on the 
screen. 
  Press the “ON/STAND-BY” button again to confirm, other -
wise the message will disappear after 15 seconds.  
When you press the “ON/STAND-BY” button a second 
time, the system will show the countdown timer on the 
screen.
2.  The cooling fans continue to operate for about 10 seconds 
for cooling cycle. When the Power LED turns...

15English
Installation
Adjusting the Projected Image
Adjusting the Projector’s Height 
The projector is equipped with elevator feet for   
adjusting the image height.
1.  Locate the adjustable foot you wish to modify on the 
underside of the projector. 
2.  Rotate the three adjustable rings counter clockwise to 
raise the projector or clockwise to lower it. Repeat with the 
remaining feet as needed.
Tilt-Adjustment Feet
Tilt-Adjustment Ring    

16
English
Installation
Adjusting the Projector’s Zoom / Focus
Focus Ring Zoom Ring
You may turn the zoom ring to zoom in or out. To focus 
the image, rotate the focus ring until the image is clear.  
The projector will focus at distances from 
3.9 to 39.4 feet (1.2 
to 12.0 meters).
Adjusting Projection Image Size
16:9
4:3
C
A
B
4:3
16:9AB AC
(m) (m)(inch) (m)(m)(inch)
1.20 0.7730.31 1.200.7127.83
2.00 1.2850.52 2.001.1846.38
2.50 1.6063.15 2.501.4757.97
3.00 1.9275.78 3.001.7769.57
4.00 2.57101.04...

17English
User Controls
The Projector has multilingual On-screen Display menus that 
allow you to make image adjustments and change a variety of 
settings. The projector will automatically detect the source. 
How to operate 
1. To open the OSD menu, press “MENU” on the Remote Control.
2  When OSD is displayed, use
   keys to select any item in the 
main menu. While making a selection on a particular page, press  
 or “Enter” key to enter sub menu.
3. Use   keys to select the desired item and adjust the...

18
English
User Controls
Menu Tree(QJOLVK
,0$*(LVSOD\0RGH%ULJKWQHVV&RQWUDVW6KDUSQHVV6DWXUDWLRQ7LQW$GYDQFHG,0$*(_$9$1&(HJDPPD)LOP9LGHR*UDSKLFV3&%ULOOLDQW&RORU
1&RORU7HPS:DUP0HGLXP&ROG&RORU&RORU6SDFH$8725*%

19English
User Controls
IMAGE
 Display Mode
There are many factory presets optimized for various types of   
images.
  Presentation: Good color and brightness from PC input.
 Bright: Maximum brightness from PC input.
 Movie: For home theater .
 sRGB: Standardised accurate color.
 Blackboard: This mode should be selected to achieve optimum 
color settings when projecting onto a blackboard (green).
 Classroom : This mode is recommended for projecting in a 
classroom.
  User1: User’s settings.
...

20
English
User Controls
IMAGE
  Contrast
The contrast controls the degree of difference between the lightest 
and darkest parts of the picture. Adjusting the contrast changes the 
amount of black and white in the image.
 
  Press the  to decrease the contrast.
 
 Press the  to increase the contrast.
 
  Sharpness
Adjust the sharpness of the image.
 
  Press the  to decrease the sharpness.
 
  Press the  to increase the sharpness. 
  Saturation
Adjust a video image from black and white to fully...