Home > Optoma > Projector > Optoma Ds309 Projector User Manual

Optoma Ds309 Projector User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Optoma Ds309 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1077 Optoma manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    3English
    
    User Controls
    
     Language
    Choose the multilingual OSD menu. Press  or  into the sub 
    menu and then use the  or  key to select your preferred  
    language. Press “Enter” to finalize the selection. 
    Setup | Language 
    						
    							
    32English
    
    User Controls
    
    Setup
     Projection
        Front-Desktop
    The factory default setting.
        Rear-Desktop
    When you select this function, the projector reverses the image 
    so you can project behind a translucent screen.
        Front-Ceiling 
    When you select this function, the projector turns the image 
    upside down for ceiling-mounted projection.
        Rear-Ceiling 
    When you select this function, the projector reverses and turns 
    the image upside down at same time. You can project from 
    behind a translucent screen with ceiling mounted projection.
      Projector ID
    Allows RS232 control of an individual projector. Range 01-99.
     Information Hide
     On: Choose “On” to hide the searching message.
     Off: Choose “Off” to show the searching message. 
    						
    							
    33English
    
    User Controls
    
    Setup
     Start Up Logo
     
    Use this function to select your desired start-up screen.
     On: Choose “On” to show the Optoma logo.
     Off: Choose “Off” to show a blank image. 
    						
    							
    34English
    
    User Controls
    
    Setup | Security
     Security
     On: Choose “On” to use security verification when the turning 
    on the projector.
     Off: Choose “Off” to be able to switch on the  
    projector without password verification.
     Security Timer
    Can be select the time (Month/Day/Hour) function to set the 
    number of hours the projector can be used. Once this time has 
    elapsed you will be requested to enter your password again. 
    						
    							
    35English
    
    User Controls
    
    Setup | Security
    ■ First Time:
    1.	The	Password	is	4	digits,	DEFAULT	VALUE	is	“1234”.	( first	time)
    2.	Use	number	buttons	on	the	remote	to	select	your	password,	and	then	
    press “”	key	to	confirm	your	selection.
      Change Password
    1.  Press “” to input old password.
    2.  Use number button to enter current password, and then 
    press “” key again to reveal next OSD menu.
    3.  Scroll down to highlight Password, and then press “
    ” 
    to activate.
    4.  Enter new password (4 digits in length) using the 
    number buttons on the remote, then press “” to 
    confirm.
    5.  Enter new password again and press “
    ” to confirm. 
    						
    							
    36English
    
    User Controls
    
    Setup | Signal
     Phase
    “Phase” synchronizes the signal timing of the display with the 
    graphic card. If you experience an unstable or flickering image, 
    use this function to correct it.
     Frequency
    “Frequency” changes the display data frequency to match the 
    frequency of your computer’s graphic card. If you experience a 
    vertical flickering bar, use this function to make an adjustment.
     H. Position
     Press the  to move the image left.
     Press the  to move the image right. 
     V. Position
     Press the  to move the image down.
     Press the  to move the image up.  
    						
    							
    37English
    
    User Controls
    
     Menu Location
    Choose the menu location on the display screen.
     Source Lock
     On: The projector will search specified connection port.
     Off: The projector will search for other signals if the current input signal is lost. 
      High Altitude
    Choose “On” to turn on High Altitude mode. Operates the fans at 
    full speed continuously to allow for proper high altitude cooling of 
    the projector.
     Keypad Lock
    When the keypad lock function is on, the control panel will be 
    locked, but the projector can still be operated by the remote 
    control. If canceling this function, use the remote control or press 
    the “Enter” key on the control panel for 7 seconds to turn it off.
      Background Color
    Use this feature to display a “Blue” or “Black” screen when no 
    signal is available.
     Mute
     Choose the “On” to turn mute on. 
     Choose the “Off” to turn mute off. 
    Options 
    						
    							
    38English
    
    User Controls
    
    Options
     Volume
      Press the  to decrease the volume.
      Press the  to increase the volume.
      Reset
    Choose “Yes” to return the display parameters on all menus to the 
    factory default settings. 
    						
    							
    39English
    
    User Controls
    
     Direct Power On
    Choose “On” to turn on Direct Power On mode. The projector 
    will automatically power on when AC power is supplied, with-
    out pressing the “Power/Standby” key on the projector control 
    panel or “Power” key on the remote control.
     Auto Power Off (min)
    Sets the countdown timer interval. The countdown timer will 
    start, when there is no signal being sent to the projector. Then 
    projector will automatically power off when the countdown has 
    finished (in minutes). 
     Sleep Timer (min)
    Sets the countdown timer interval. The timer will begin, with or 
    without a signal input. Then the projector will automatically  
    power off then the sleep timer countdown has finished. 
    Options  
    						
    							
    40English
    
    User Controls
    Options | 
    Lamp Settings
     Lamp Hours
    Displays the projection time.
     Lamp Reminder
    Choose this function to show or to hide the warning message 
    when the changing lamp message is displayed. The message will 
    appear 30 hours before suggested replacement of lamp. 
     Brightness Mode
     STD: Choose “STD” to dim the projector lamp which will lower 
    power consumption and extend the lamp life by up to 130%. 
     BRIGHT: Choose “BRIGHT” to increase the brightness.
     Lamp Reset
    Reset the lamp life hour after replacing the lamp. 
    						
    All Optoma manuals Comments (0)

    Related Manuals for Optoma Ds309 Projector User Manual