Optoma Ds216 Projector User Manual

1English
Table of Contents  ................................................................................... 1
Usage Notice  .......................................................................................... 2
Safety Information ........................................................................\
................. 2
Precautions........................................................................\
............................ 3
Eye Safety Warnings...

2
English
Usage Notice
Safety Information
The lightning flash with arrow head within an equilateral triangle is 
intended to alert the user to the presence of uninsulated “dangerous \
voltage” within the product’s enclosure that may be of sufficient 
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert 
the user to the presence of important operating and maintenance 
(servicing) instructions in the literature accompanying...

3English
Usage Notice
	When the lamp 
reaches the end 
of its life, the 
projector will 
not turn back on 
until the lamp 
module has 
been replaced. 
To replace the 
lamp, follow 
the procedures 
listed under 
“Replacing the 
Lamp” section 
on pages 40-41.
Precautions
 
Please follow all warnings, precautions and 
maintenance as recommended in this user’s 
guide.
▀■ Warning-  Do not look into the projector’s lens when the lamp is 
on. The bright light may hurt your eyes.
▀■ Warning- To reduce the risk...

4
English
Usage Notice
Do:
		Turn off and unplug the power plug from the AC outlet before 
cleaning the product.
		Use a soft dry cloth with mild detergent to clean the display 
housing.
		Disconnect the power plug from AC outlet if the product is 
not being used for a long period of time.
Do not:
		Block the slots and openings on the unit provided for 
ventilation.
		Use abrasive cleaners, waxes or solvents to clean the unit.
		Use under the following conditions:
   - In extremely hot, cold or...

5English
Usage Notice
Eye Safety Warnings
 
▀■ Avoid staring/facing directly into the projector beam at all 
times. Keep your back to the beam as much as possible.
▀■ When projector is used in a classroom, adequately supervise 
students when they are asked to point out something on the 
screen.
▀■ In order to minimize the lamp power, use room blinds to re -
duce ambient light levels. 
Product Features
▀■ XGA (1024x768) / SVGA (800x600) Native resolution
▀■ HDTV compatible (720P, 1080i/p) 
▀■ VGA monitor...

6
English
Introduction
Power Cord  1.8m
IR Remote Control
Package Overview
Unpack and inspect the box contents to ensure 
all parts listed below are in the box. If something 
is missing, please contact your nearest customer 
service center.
Documentation : 
	User’s Manual
	Warranty Card
	Quick Start Card
	WEEE Card  
  (for EMEA only)
	
Due to different 
applications in 
each country, 
some regions 
may have 
different 
accessories.
2 × AAA Batteries
Projector
Carrying case 
(Option)       

7English
Introduction
1.   POWER button and 
LED indicator
2.  Ventilation (inlet)
3.  Zoom Ring
4.  Focus Ring
Main Unit
Product Overview
5. Zoom Lens
6.  IR Receiver
7.  Ventilation (outlet)
8.  Input / Output Connections
9.  Power Socket
35
1
7
2
7
2
8
9
6
4 

8
English
Introduction
Input / Output Connectio
VGA1-IN/SCART
VGA2 - IN VGA-OUT
S-VIDEO RS232
VIDEO
4321
5
87
6
1.  VGA1-In/SCART Connector  
(PC Analog Signal/Component Video Input/HDTV/SCART/
YPbPr) 
2.  S-Video Input Connector
3.  Composite Video Input Connector
4.  RS-232 Connector (3-pin)
5.  Power Socket
6.  Kensington
TM Lock Port
The items below are only for models that operate 
with XGA model:
7. VGA-Out Connector (Monitor Loop-through Output) 
8.  VGA2-In Connector  
  (PC Analog...

9English
Introduction
Remote Control
1. LED Indicator
2.  Power On/Off
3.  No Function on this model
4.  No Function on this model
5.  Four Directional   
  Select Keys
6.  Re-Sync
7.   No Function on this model
8.   No Function on this model
9.  Zoom
10.  AV mute
11.  Video 
12.  VGA
13.  Freeze
14.  S-Video 
15.  Contrast
16.  Brightness
17.  Menu
18.  Keystone +/-
19.  Source
20.  Enter
21.  No Function on this model
22.   No Function on this model
23.  Numbered keypad 
  (for password input)
1
9
10...

10
English
Introduction
Using the Remote Control
Power
  Refer to the “Power On/Off the Projector” 
section on pages 13-14.
 Confirm your item selection.
SourcePress “SOURCE” to select an input signal.
Re-SYNC  Automatically synchronizes the projector to 
the input source.
Four Directional 
Select KeysUse     to select items or make 
adjustments to your selection.
Keystone +/-Adjust image distortion caused by tilting the 
projector.
Brightness  Adjust the brightness of the image.
Menu
Press “Menu” to...