Olympus Camera Xz 10 Instruction Manual

61EN
Printing pictures
5
•  To exit, unplug the USB cable from the camera while the picture selection\
 screen is displayed.
 Custom printing
 1 Connect the camera to the printer using the supplied USB cable and turn \
the camera on.
•  When the camera is turned on, a dialog should be displayed in the monitor prompting you to choose a 
host. If it is not, select [Auto] for [USB Mode] (P. 51) in 
the camera custom menus.
2 Use FG to select [Custom Print].
•  [Do Not Remove USB Cable] will be displayed,...

62EN
Printing pictures
5
Print (f)Prints the currently displayed picture. If there is a picture that 
[Single Print] reservation has already been applied to, only that 
reserved picture will be printed.
Single Print ( t)Applies print reservation to the currently displayed picture. If you 
want to apply reservation to other pictures after applying [Single 
Print], use HI to select them.
More (u) Sets the number of prints and other items for the currently 
displayed picture, and whether or not to print it....

63EN
Connecting the camera to a computer
6
6
 Installing Software
 
 Windows
1 Insert the supplied CD in a CD-ROM drive.
Windows XP
•  A “Setup” dialog will be displayed.
Windows Vista/Windows 7/Windows 8 •  An Autorun dialog will be displayed. Click “OLYMPUS  Setup” to display the “Setup” dialog.
# Caution
•  If the “Setup” dialog is not displayed, select “My Computer”\
 (Windows XP) or “Computer” (Windows Vista/Windows 7) from the start menu. Double-click the 
CD-ROM (OLYMPUS Setup) icon to open the...

64EN
Connecting the camera to a computer
6
3 Register your Olympus product.
•  Click the “Registration” button and follow the on-screen instructi\
ons.
4 Install OLYMPUS Viewer 3.
•  Check the system requirements before beginning installation.
•  Click the “OLYMPUS Viewer 3” button and follow the on-screen instructions to install the software.
Operating System Windows XP (Service Pack 2 or later) /Windows Vista / 
Windows 7/Windows 8
Processor Pentium 4  1.3 GHz or better
(Core 2 Duo 2.13 GHz or better...

65EN
Connecting the camera to a computer
6
Copying pictures to a computer without 
OLYMPUS Viewer 3
Your camera supports the USB Mass Storage Class. You can transfer images to a 
computer by connecting the camera to the computer with the provided USB \
cable. The 
following operating systems are compatible with the USB connection:
WindowsWindows XP Home Edition / Windows XP Professional /
Windows Vista / Windows 7 / Windows 8
Macintosh Mac OS X version 10.3 or later
1 Turn the camera off and connect it...

66EN
Usage Tips
7
7
If the camera does not work as intended, or if an error message is displ\
ayed on the screen, 
and you are unsure of what to do, refer to the information below to fix \
the problem(s).
Troubleshooting
Usage Tips
 
  Batter y
The camera does not work even when 
batteries are installed.
•  Insert recharged batteries in the correct  direction. g “Inserting and removing 
the battery and card” (P. 5)
•  Battery performance may have been  reduced temporarily due to low 
temperature. Take...

67EN
Usage Tips
7
 Error message
Monitor indicationPossible causeCorrective action
Card ErrorThere is a problem with the card. Insert the card again.
If the problem persists, format 
the card.
If the card cannot be 
formatted, it cannot be used.
Write Protect
Writing to the card is prohibited. The card write-protect switch 
is set to the “LOCK” side. 
Release the switch. 
g 
“SD/SDHC/SDXC card 
write-protect switch” (P. 73)
Memory Full •  The internal memory is full. 
No more pictures can be taken or 
no...

68EN
Usage Tips
7
Monitor indicationPossible causeCorrective action
The Image Cannot Be 
Edited Pictures taken with another 
camera cannot be edited on this 
camera.
Use image processing 
software to edit the picture.
 m
The internal temperature of 
the camera has risen due to 
sequential shooting.Turn off the camera and wait 
for the internal temperature 
to cool.
Internal camera 
temperature is too high. Please wait for cooling  before camera use. Wait a moment for the camera 
to turn off...

69EN
Usage Tips
7
Shooting tips
When you are unsure of how to take a picture that you envision, refer to\
 the information 
below.
 
 Focusing
Focusing on the subject.
•  Take pictures using the touch screen.  g P. 29
•  Taking a picture of a subject not in the center of the monitor.  g P. 37
After focusing on an object at the same distance as the subject, compose\
 the shot, and 
take the picture. 
•  Using the face priority AF.  g P. 38
•  Taking a picture of a shadowy subject.  g P. 51
Using the AF...

70EN
Usage Tips
7
 
 Exposure (brightness) 
Taking pictures with the right brightness.
•  Select [Auto] for [Gradation] in picture mode. g P. 42
•  Using the face priority AF.  g P. 38
•  Taking pictures using [Spot Metering].  g P. 36
Brightness is matched with a subject in the center of the screen and the\
 image is not 
affected by background light.
•  Taking pictures using [Fill In] flash.  g P. 22
A subject against backlight is brightened.
•  Taking pictures of a white beach or snow scene.  g P....