Olympus Camera Vr 370 Instruction Manual

							31EN
  A Movie Menu
  Selecting the image size for movies Selecting the image size for movies 
AA [Image Size/Frame Rate] [Image Size/Frame Rate]
Submenu 1 Submenu 2 Application
Image Size
720P 
(1280×720)/
VGA (640×480)Select the image 
quality based on 
the image size and 
frame rate. Higher 
frame rates provide 
smoother movie 
images. Frame Rate
30fps*1/
15fps*1
*1
  frames per second
  ●“Number of storable pictures (still images)/
Recording length (movies) in the internal memory 
and cards” (p. 63, 64)
  Reducing the blur caused by the   Reducing the blur caused by the 
camera shake when shootingcamera shake when shooting
A A [IS Movie Mode][IS Movie Mode]
Submenu 2 Application
OffThe image stabilizer is 
deactivated. This is recommended 
for shooting when the camera is 
fi xed in place on a tripod or other 
stable surface.
On The image stabilizer is activated.
  ●Images may not be stabilized if camera shake is 
too severe.
Recording sound when shooting Recording sound when shooting 
movies movies AA [ [RR]]
Submenu 2 Application
Off No sound is recorded.
On Sound is recorded.
  ●When set to [On], only the digital zoom can be 
used during movie recording. To record the movie 
with the optical zoom, set [R] (movies) to [Off].
 
q Playback Menu
 
Playing back images automatically  
Playing back images automatically 
qq [Slideshow] [Slideshow]
Submenu 2 Submenu 3 Application
BGMOffNo background music 
is played.
OnBackground music is 
played.
Type
Normal/
Fader/
ZoomSelects the type of 
transition effect used 
between slides.
Start―Starts the slideshow.
  ●During a slideshow, press I to advance one 
frame, H to go back one frame. 
						

							32EN
Changing the image size Changing the image size qq [ [QQ]]This saves a high-resolution image as a separate 
image with a smaller size for use in e-mail 
attachments and other applications.
Submenu 1 Submenu 2 Submenu 3
Edit
Q


1 Use HI to select an image.
2 Use FG to select an image size and press the 
A button.
  ●The resized image is saved as a separate 
image.
Cropping image Cropping image qq [ [PP]]
Submenu 1 Submenu 2
Edit
P
1 Use HI to select an image, and press the A 
button.
2 Use the zoom lever to select the size of the 
cropping frame, and use FGHI to move the 
frame.
Cropping frame
MENUBack
3 Press the A button after you have selected the 
area to trim.
  ●The edited image is saved as a separate 
image.
  Adding sound to still images   Adding sound to still images 
qq [ [RR]]
Submenu 1 Submenu 2
Edit
R
1 Use HI to select an image.
2 Aim the microphone toward the sound source.
Microphone
3 Press the A button.
  ●Recording starts.
  ●The camera adds (records) sound for approx. 
4 seconds while playing back the image. 
						

							33EN
Retouching faces on still images Retouching faces on still images 
qq [Beauty Fix] [Beauty Fix]
Submenu 1 Submenu 2
Edit Beauty Fix
  ●Depending on the picture, the editing may not be 
effective.
1 Use HI to select an image, and press the 
Q button.
2 Use FG to select a retouching item, and press 
the Q button.
3 To save the image, select [OK] on the review 
screen and press the Q button. To retouch the 
image additionally, select [Beauty Fix].
  ●The retouched image is saved as a separate 
image.
MENUBack
OKBeauty Fix
  ●The [Image Size] of the retouched image is limited 
to [n] or lower. 
Beauty FixBeauty Fix1 Select a retouching item, and press the Q button.
MENU
Off
Eye Color Back
2 Press the Q button on the review screen.
Brightening areas that are dark Brightening areas that are dark 
due to backlight or other reasons due to backlight or other reasons 
qq [Shadow Adj] [Shadow Adj]
Submenu 1 Submenu 2
Edit Shadow Adj
1 Use HI to select an image, and press the A 
button.
  ●The edited image is saved as a separate image.
  ●Depending on the picture, the editing may not be 
effective.
  ●The retouching process may lower the image 
resolution. 
						

							34EN
Retouching red eyes in fl ash Retouching red eyes in fl ash 
shooting shooting qq [Redeye Fix] [Redeye Fix]
Submenu 1 Submenu 2
Edit Redeye Fix
1 Use HI to select an image, and press the A 
button.
  ●The edited image is saved as a separate image.
  ●Depending on the picture, the editing may not be 
effective.
  ●The retouching process may lower the image 
resolution.
  Rotating images   Rotating images qq [ [yy]]
Submenu 1 Submenu 2
Edit
y
1 Use HI to select an image.
2 Press the A button to rotate the image.
3 If necessary, repeat Steps 1 and 2 to make 
settings for other images, and press the  
button.
  ●The new picture orientations will be saved even 
after the power is turned off.
  Erasing images   Erasing images qq [Erase] [Erase]
Submenu 2 Application
All EraseAll images in the internal memory 
or card will be erased.
Sel. ImageImages are individually selected 
and erased.
Erase Deletes the image displayed.
  ●When erasing pictures in the internal memory, do 
not insert the card into the camera. 
  ●Protected images cannot be erased.
 
 
To individually select and erase images  
 
To individually select and erase images [Sel. Image][Sel. Image]
1 Use FG to select [Sel. Image], and press the 
A button.
2 Use FGHI to select the image to be erased, 
and press the A button to add a R mark to the 
image.
  ●Turn to the T end to return to the single frame 
display.
Sel. Image
Erase/CancelOK
MENU
(1)4/30
R mark 
						

							35EN
3 Repeat Step 2 to select the images to be erased, 
and then press the  button to erase the 
selected images.
4 Use FG to select [Yes], and press the A 
button.
  ●The images with a R mark are erased.
 
To erase all images [All Erase] 
To erase all images [All Erase]1 Use FG to select [All Erase], and press the 
A button.
2 Use FG to select [Yes], and press the A 
button.
Saving print settings to the image Saving print settings to the image 
data data qq [Print Order] [Print Order]
  ●“Print Reservations” (p. 48)
  ●Print reservation can be set only for still images 
that are recorded to the card.
Protecting images Protecting images qq [ [RR]]
  ●Protected images cannot be erased by [Erase] 
(p. 18, 34), [Sel. Image] (p. 34), or [All Erase] (p. 35), 
but all images are erased by [Memory Format]/
[Format] (p. 36).
1 Use HI to select an image.
  ●Turn the zoom lever to the W end to display 
an index view. Images can be quickly selected 
using the FGHI buttons.2 Press the A button.
  ●Press the A button again to cancel the 
settings.
3 If necessary, repeat Steps 1 and 2 to protect 
other images, and press the  button.
Setting images to upload to Setting images to upload to 
Internet using OLYMPUS Viewer 3 Internet using OLYMPUS Viewer 3 
qq [Upload Order] [Upload Order]
1 Use HI to select an image.
  ●Turn the zoom lever to the W end to display 
an index view. Images can be quickly selected 
using the FGHI buttons.
2 Press the A button.
  ●Press the A button again to cancel the 
settings.
3 If necessary, repeat Steps 1 and 2 to make 
settings for other images, and press the  
button.
  ●Only JPEG fi les can be ordered.
  ●For details on OLYMPUS Viewer 3, refer to 
“Installing the PC software and registering user” 
(p. 43).
  ●For details on uploading images, refer to 
OLYMPUS Viewer 3 “Help”. 
						

							36EN
  d Settings Menu 1
 
Erasing data completely  
Erasing data completely 
dd [Memory Format]/  [Memory Format]/ dd [Format] [Format]
  ●Before formatting, check that no important data is 
left in the internal memory or card.
  ●Cards must be formatted with this camera before 
fi rst use or after being used with other cameras or 
computers.
  ●Be sure to remove the card before formatting the 
internal memory.
Submenu 2 Application
Ye sCompletely erases the image data 
in the internal memory or card 
(including protected images).
No Cancels formatting.
  Copying images in the internal   Copying images in the internal 
memory to the card memory to the card dd [Backup] [Backup]
Submenu 2 Application
Ye sBacks up image data in the 
internal memory to the card.
No  Cancels the backup.
Using an Eye-Fi card Using an Eye-Fi card dd [Eye-Fi] [Eye-Fi]
Submenu 2 Application
All Transfers all images.
Sel. Image Transfers only selected image.
Off  Disable Eye-Fi communication. 
  ●When using an Eye-Fi card, read the Eye-Fi card 
instruction manual carefully, and comply with the 
instructions.
  ●Use the Eye-Fi card in compliance with the laws 
and regulations of the country where the camera 
is used.
  ●In locations such as on an airplane, where the Eye-
Fi communication is prohibited, remove the Eye-Fi 
card from the camera, or set [Eye-Fi] to [Off].
  ●This camera does not support the Eye-Fi card’s 
Endless mode. 
						

							37EN
  Selecting a method for connecting   Selecting a method for connecting 
the camera to other devices the camera to other devices 
dd [USB Connection] [USB Connection]
Submenu 2 Application
AutoSet to select the connection 
method each time the camera is 
connected to another device.
StorageConnect as a card reader.
MTPAs a portable device, connect to 
PC loaded with Windows Vista/
Windows 7/Windows 8.
PrintSelect when connecting to a 
PictBridge-compatible printer.
  ●Select [Storage] to use the supplied software.
  ●Refer to “Connecting with a computer” (p. 42) for the 
connection method with a computer.
Turning on the camera with the Turning on the camera with the qq  
button button dd [ [qq Power On] Power On]
Submenu 2 Application
NoThe camera is not turned on. To 
turn on the camera, press the 
n button.
Ye sPress and hold the q button 
to turn the camera on in the 
playback mode.
Saving the mode when the camera Saving the mode when the camera 
is turned off is turned off dd [Keep  [Keep zz Settings] Settings]
Submenu 2 Application
Ye sThe shooting mode is saved 
when the camera is turned off and 
is reactivated the next time the 
camera is turned on.
OnThe shooting mode is set to P 
mode when the camera is turned 
on. 
Selecting the camera sound and Selecting the camera sound and 
its volume its volume dd [Sound Settings] [Sound Settings]
Submenu 2 Submenu 3 Application
Sound Type
1/2/3Selects the camera 
sounds (operation 
sounds and shutter 
sound).
Volume
0/1/2/3/4/5Selects the operation 
volume of camera 
buttons.
q Volume
0/1/2/3/4/5Selects the image 
playback volume. 
						

							38EN
  d Settings Menu 2
Adjusting the image processing Adjusting the image processing 
function function dd [Pixel Mapping] [Pixel Mapping]
  ●This function has already been adjusted at factory 
shipping, and no adjustment is needed right 
after purchase. Approximately once a year is 
recommended.
  ●For best results, wait at least one minute after 
taking or viewing pictures before performing pixel 
mapping. If the camera is turned off during pixel 
mapping, be sure to perform it again.
To adjust the image processing functionTo adjust the image processing functionPress the A button when [Start] (Submenu 2) is 
displayed.
  ●The check and adjustment of the image 
processing function starts.
Adjusting the brightness of the Adjusting the brightness of the 
monitor monitor dd [ [ss]]
To adjust the monitor brightnessTo adjust the monitor brightness
Submenu 2 Application
Bright/NormalSelects the monitor brightness 
depending on the surrounding 
brightness. 
						

							39EN
   
Playing back images on a TV    
Playing back images on a TV dd [NTSC/PAL] [NTSC/PAL]
  The TV video signal system varies depending on the countries and regions. Before viewing camera 
images on your TV, select the video output according to your TV’s video signal type.
Submenu 2 Submenu 3 Application
NTSC/PALNTSCConnecting the camera to a TV in North America, Taiwan, Korea, 
Japan, and so on.
PA LConnecting the camera to a TV in European countries, China, and 
so on.
  The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TVTo play back camera images on a TV  ●Connection via AV cable
1 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]).
2 Connect the TV and camera.
3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera)”.
4 Turn on the camera, and use FGHI to select the image for playback.
Connect to the TV video 
input jack (yellow) and 
audio input jack (white).Multi-connector
AV cable (sold separately: CB-AVC5)
  ●For details on changing the input source of the TV, refer to the TV’s instruction manual.
  ●Depending on the TV’s settings, the displayed images and information may become cropped. 
						

							40EN
  Saving battery power between   Saving battery power between 
shots shots dd [Power Save] [Power Save]
Submenu 2 Application
Off Cancels [Power Save].
OnWhen the camera is not being 
used for approx. 10 seconds, the 
monitor automatically turns off to 
save battery power.
To resume standby modeTo resume standby modePress any button.
  Changing the display language   Changing the display language 
dd [ [ll]]
Submenu 2 Application
LanguagesThe language for the menus and 
error messages displayed on the 
monitor is selected.
  Setting the date and time   Setting the date and time dd [ [XX]]
1 Press the Arrow pad to FG to select the year for 
[Y].
2 Press the Arrow pad to I to save the setting for 
[Y].
3 As in Steps 1 and 2, press the Arrow pad to 
FGHI to set [M] (month), [D] (day), [Time] 
(hours and minutes), and [Y/M/D] (date order), 
and then press the A button.
  ●For precise time setting, press the A button as the 
time signal strikes 00 seconds.
  Choosing home and alternate time   Choosing home and alternate time 
zones zones dd [World Time] [World Time]
  ●You will not be able to select a time zone using 
[World Time] if the camera clock has not fi rst been 
set using [X].
Submenu 2 Submenu 3 Application
Home/
AlternatexThe time in the home 
time zone (the time 
zone selected for x 
in submenu 2).
zThe time in the travel 
destination time 
zone (the time zone 
selected for z in 
submenu 2).
x
*1—Select the home time 
zone (x).
z
*1, 2—Select the travel 
destination time zone 
(z).
*1  In areas where daylight saving time is in effect, use 
FG to turn daylight saving time ([Summer]) on.
*2  When you select a time zone, the camera 
automatically calculates the time difference 
between the selected zone and the home 
time zone (x) to display the time in the travel 
destination time zone (z).