Olympus Camera Tg 630 Ihs Instruction Manual

							41EN
 
● When using an Eye-Fi card, read the Eye-Fi card 
instruction manual carefully, and comply with the 
instructions.
 
● This camera does not support the Eye-Fi card’s 
Endless mode.
 
● Before use, refer to “FlashAir/Eye-Fi card” (p. 71).
 Selecting a method for connecting  Selecting a method for connecting 
the camera to other devices the camera to other devices 
dd [USB Connection] [USB Connection]
Submenu 2 Application
Auto Set to select the connection 
method each time the camera is 
connected to another device.
StorageConnect camera as a card reader.
MTP For Windows Vista/Windows 7/
Windows 8, connect camera as a 
portable device.
Print Select when connecting to a 
PictBridge-compatible printer.
 
● When using the supplied software, select [Storage].
 
● Refer to “Connecting with a computer” (p. 49) for the 
connection method with a computer.
Turning on the camera with the Turning on the camera with the qq  
button button dd [ [qq Power On] Power On]
Submenu 2 Application
No The camera is not turned on. To 
turn on the camera, press the 
n button.
Ye s
Press and hold the 
q button 
to turn the camera on in the 
playback mode.
Saving the mode when the camera Saving the mode when the camera 
is turned off is turned off dd [Keep [KeepzzSettings]Settings]
Submenu 2 Application
Ye sThe shooting mode is saved 
when the camera is turned off and 
is reactivated the next time the 
camera is turned on.
No The shooting mode is set to P 
mode when the camera is turned 
on.  
						

							42EN
Selecting the camera sound and Selecting the camera sound and 
its volume its volume dd [Sound Settings] [Sound Settings]
Submenu 2 Submenu 3 Application
Sound Type
1/2/3 Selects the camera 
sounds (operation 
sounds, shutter sound, 
and warning sound).
Volume
0/1/2/3/4/5 Selects the operation 
volume of camera 
buttons.
q Volume
0/1/2/3/4/5 Selects the image 
playback volume.
 d Settings Menu 2
 Resetting the fi
 le names of  Resetting the fi le names of 
pictures pictures dd [File Name] [File Name]
Month: 1 to C
(A=October, 
B=November, 
C=December)
Day: 01 to 31
Pmdd
Folder name Folder name File name
DCIM100OLYMP
999OLYMP Pmdd0001.jpg
Pmdd9999.jpg
Automatic 
numbering
Automatic 
numbering 
						

							43EN
Submenu 2Application
ResetThis resets the sequential number 
for the folder name and 
fi le name 
whenever a new card is inserted.*1 
This is useful when grouping 
images on separate cards.
Auto Even when a new card is inserted, 
this continues the numbering for 
the folder name and 
fi le name 
from the previous card. This is 
useful for managing all image 
folder names and  fi les names with 
sequential numbers.
*1  The number for the folder name is reset to 100,  and the one for the fi  le name is reset to 0001.
Adjusting the image processing Adjusting the image processing 
function function dd [Pixel Mapping] [Pixel Mapping] 
● This function has already been adjusted at factory 
shipping, and no adjustment is needed right 
after purchase. Approximately once a year is 
recommended.
 
● For best results, wait at least one minute after 
taking or viewing pictures before performing pixel 
mapping. If the camera is turned off during pixel 
mapping, be sure to perform it again.
To adjust the image processing functionTo adjust the image processing functionPress the A button when [Start] (Submenu 2) is 
displayed.
 
● The check and adjustment of the image 
processing function starts.
Adjusting the brightness of the Adjusting the brightness of the 
monitor monitor dd [ [ss]]
To adjust the monitor brightnessTo adjust the monitor brightness1  Use FG to adjust the brightness while viewing 
the screen, and then press the A button.
MENUBacks 
						

							44EN
  Playing back images on a TV   Playing back images on a TV dd [TV Out] [TV Out]
  The TV video signal system varies depending on the countries and regions. Be\
fore viewing camera images on your TV, select the video output according to your TV’s video signal type.
Submenu 2 Submenu 3 Application
NTSC/PAL NTSC
Connecting the camera to a TV in North America, Taiwan, Korea, 
Japan, and so on.
PA L Connecting the camera to a TV in European countries, China, and 
so on.
HDMI Out
480p/576p
720p
1080i Set the signal format to be given priority. If the TV setting does not 
match, it is changed automatically.
HDMI Control
Off Operate with the camera.
On Operate with the TV remote control.
  The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TVTo play back camera images on a TV 
● Connection via AV cable
1  Use the camera to select the same video signal system as the one of conn\
ected TV ([NTSC]/[PAL]).
2  Connect the TV and camera.
 
●  Connection via HDMI cable
1  On the camera, select the digital signal format that will be connected (\
[480p/576p]/[720p]/[1080i]).
2  Connect the TV and camera.
3  Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the\
 camera)”.
4  Turn on the camera, and use  FGHI to select the image for playback.
 
● When the camera is connected to the computer by the USB cable, do not co\
nnect the HDMI cable to the 
camera. 
						

							45EN
Connect to the HDMI 
connector on the TV.
HDMI micro connector 
(type D)HDMI cable 
(sold separately: CB-HD1) Connect to the TV video 
input jack (yellow) and 
audio input jack (white).
Multi-connector
AV cable 
(sold separately: CB-AVC3)
 
● For details on changing the input source of the TV, refer to the TV’s instruction manual.
 
● When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take 
priority.
 
● Depending on the TV’s settings, the displayed images and information may become cropped.
To operate images with the TV remote controlTo operate images with the TV remote control1  Set [HDMI Control] to [On], and turn off the camera.
2  Connect the camera and TV with an HDMI cable. “Connection via HDMI cable” (p. 44)
3  First turn on the TV, and then turn on the camera.
 
● Operate by following the operation guide that is displayed on the TV.
 
● With some TVs, operations cannot be performed with the TV remote control even though the operation guide 
is displayed on the screen.
 
● If operations cannot be performed with the TV remote control, set [HDMI Control] to [Off] and operate using 
the camera. 
						

							46EN
 Saving battery power between  Saving battery power between 
shots shots dd [Power Save] [Power Save]
Submenu 2Application
OffCancels [Power Save].
On When the camera is not being 
used for approx. 10 seconds, the 
monitor automatically turns off to 
save battery power.
To resume standby modeTo resume standby modePress any button.
 Changing the display language  Changing the display language 
dd [ [ll]]
Submenu 2
Application
Languages The language for the menus and 
error messages displayed on the 
monitor is selected.
 Setting the date and time  Setting the date and time dd [ [XX]]1 
Press the joystick to FG to select the year for 
[Y].
2  Press the joystick to I to save the setting for [Y].
3  As in Steps 1 and 2, press the joystick to 
FGHI to set [M] (month), [D] (day), [Time] 
(hours and minutes), and [Y/M/D] (date order), 
and then press the  A button.
 
● For precise time setting, press the A button as the 
time signal strikes 00 seconds.
To check the date and timeTo check the date and timePress the Y button while the camera is turned off. 
The current time is displayed for approx. 30 seconds. 
						

							47EN
 d Settings Menu 3
 Choosing home and alternate time  Choosing home and alternate time 
zones zones dd [World Time] [World Time] 
● You will not be able to select a time zone using 
[World Time] if the camera clock has not fi  rst been 
set using [X].
Submenu 2 Submenu 3 Application
Home/
Alternate x
The time in the home 
time zone (the time 
zone selected for x in 
submenu 2).
z The time in the travel 
destination time zone 
(the time zone selected 
for z in submenu 2).
x
*1— Select the home time 
zone (x).
z
*1, 2— Select the travel 
destination time zone 
(z).
*1  In areas where daylight saving time is in effect, use 
FG to turn daylight saving time ([Summer]) on.
*2  When you select a time zone, the camera automatically calculates the time difference 
between the selected zone and the home 
time zone (x) to display the time in the travel 
destination time zone ( z).
 Registering the settings for Beauty  Registering the settings for Beauty 
Fix Fix dd [Beauty Settings] [Beauty Settings] 
● Depending on the picture, the editing may not be 
effective.
1  Use FG to select a retouching setting, and 
press the Q button.
2  Press the shutter button to take a portrait picture.
Take a portrait picture.
 
● The image is not saved.
3  Select a retouching item and retouching level, and 
press the A button.
MENU
Off
Eye Color Back
4 Press the Q button on the review screen to save 
the image.
 
● Registration is complete.
   
						

							48EN
Using the LED illuminator as an Using the LED illuminator as an 
auxiliary light auxiliary light dd [LED Illuminator] [LED Illuminator]
Submenu 2Application
OffDisables the LED illuminator.
On Enables the LED illuminator.
To use the LED illuminatorTo use the LED illuminatorPress and hold the  Y button down until the LED 
illuminator lights up.
 
● If you perform an operation when the LED 
illuminator is on, it will illuminate up to approx. 
90 seconds.
LED illuminator
 
● The LED illuminator turns off if no operation is 
performed for approx. 30 seconds.
 
● Even when the camera’s power is turned off, if the 
Y button is pressed until the LED illuminator lights 
up, it lights for 30 seconds.
To turn the LED illuminator offTo turn the LED illuminator offPress and hold the  Y button down, until the LED 
illuminator turns off. 
						

							49EN
 Connecting with a computer
When [USB Connection] is set to [Auto], connect the 
camera and the computer, select [Storage] or [MTP] 
at the screen for selecting the connection method, 
and then press the A button.
System requirementsSystem requirementsWindows  :  Windows XP Home Edition/Professional (SP1 or later)/
Windows Vista/Windows 7/
Windows 8
Macintosh  :  Mac OS X v10.3 or later
 
● Even if a computer has USB ports, proper 
operation is not guaranteed in the following cases:
 
● Computers with USB ports installed using an 
expansion card, etc.
 
● Computers without a factory-installed OS and 
home-built computers
 
● When the computer does not support SDXC 
cards, a message may appear urging to format 
the internal memory or card. (Formatting will 
completely erase all images, so do not format.)
Set [USB Connection] in the setup menu of the 
camera beforehand. (p. 41)
 Connecting the camera Connecting the camera
Connector 
cover
USB cable 
(supplied)
Multi-
connector 
						

							50EN
 Installing the PC software and registering user
WindowsWindows
1 Insert the supplied CD in a CD-
ROM drive.
Windows XP
 
● A “Setup” dialog will be displayed.
Windows Vista/Windows 7/Windows 8  
● An Autorun dialog will be displayed. Click 
“OLYMPUS Setup” to display the “Setup” dialog.
 
● If the “Setup” dialog is not displayed, select “My 
Computer” (Windows XP) or “Computer” (Windows 
Vista/Windows 7) from the start menu. Double-click 
the CD-ROM (OLYMPUS Setup) icon to open the 
“OLYMPUS Setup” window and then double-click 
“Launcher.exe”.
  If a “User Account Control” dialog is displayed, 
click “Yes” or “Continue”.
2 Register your Olympus product. 
● Click the “Registration” button and follow the 
on-screen instructions.
 
● To register the camera must be connected to 
the computer. “Connecting the camera” (p. 49)
 
● If nothing is displayed on the camera screen 
even after connecting the camera to the 
computer, the battery may be exhausted. 
Charge the battery and then connect the 
camera again.
3 Install OLYMPUS Viewer 3. 
● Check the system requirements before 
beginning installation.
 
● Click the “OLYMPUS Viewer 3” button and 
follow the on-screen instructions to install the 
software.